AEM C.A.S. 06-13 Lexus IS250 V6-2.5L F/I Cold Air Intake System from AEM Induction is identified by manufacturer part number 21-833C. This AEM intake system is engineered for 2006-2013 Lexus IS250 and the other applications listed below, replacing restrictive factory intake components with application-specific airflow routing and serviceable filtration. The gunmetal gray aluminum intake tube is configured for the factory interfaces used by this application. AEM reports an estimated gain of 9.7 HP @ 5500 RPM for its documented test configuration. Confirm the complete vehicle, engine, trim, and emissions notes in the fitment section before ordering.
Confirm AEM Induction 21-833C against the complete vehicle, engine, trim, and every application note before ordering.
Use the store vehicle selector and current manufacturer application data for final confirmation.
| Brand | AEM Induction |
|---|---|
| Manufacturer Part Number | 21-833C |
| Product Type | Cold Air Intakes |
| Condition | New |
The exact cold air intakes product identified by AEM Induction 21-833C. Additional filters, tubes, couplers, clamps, heat shields, sensors, hardware, or service supplies are included only when specifically shown or stated.
AEM Induction develops vehicle-specific and universal intake, filtration, and supporting components for street and performance applications. Black Ops Auto Works organizes each listing by exact part number and available fitment data to support accurate product selection.
What is the 21-833C?
It is the AEM Induction cold air intakes product described on this page in the listed configuration.
How do I confirm fitment?
Match the complete vehicle, engine, trim, intake layout, dimensions, sensors, and every application note before ordering.
Can I select this product by appearance alone?
No. Similar-looking intake and filter components can use different dimensions, connections, sensor provisions, mounting points, or applications.
What is included?
Only the components specifically identified on this product page are included; related filters, tubes, couplers, clamps, hardware, or service supplies may be separate.
Does an intake require tuning?
Tuning requirements vary by vehicle and intake configuration. Review the product notes and consult a qualified tuner when airflow or sensor behavior changes.
How should I maintain the filter?
Follow the filter-specific manufacturer instructions. Cleaning and treatment procedures vary by filter media and should not be assumed.
Is this product new?
Yes. The item condition is new unless this page explicitly states otherwise.
What should I verify before checkout?
Confirm the application, dimensions, included items, filter type, sensor provisions, emissions notes, and installation requirements.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
AEM Induction parts and accessories are available to browse at Black Ops Auto Works for Mustang, Camaro, Civic Si, WRX, Silverado, F-150, Ram and other import and domestic performance builds. Shop Brute Force intake kits, cold air intakes, short ram systems, DryFlow filters, replacement panels, intake tubes and filter service parts with vehicle specific fitment data for confident ordering. What AEM Induction Covers Cold Air Intake Systems AEM Induction builds vehicle specific cold air intake and short ram systems that replace restrictive factory plumbing while retaining the sensors and mounting points required for the application. Brute Force and Cold Air Induction Truck and Muscle Car Airflow Brute Force kits support popular American trucks and performance cars with large filter area, sealed or open inlet layouts, and application matched intake tubing for reliable daily driving and towing use. DryFlow Filter Technology Oil Free Serviceable Filtration DryFlow synthetic filters ...
View AEM Induction Products
Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...
View Air Intake Systems Products
Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...
View Cold Air Intakes Products
Choose Lexus IS250 intake, damper and exterior-accessory options using production, drivetrain and body configuration. Compare the exact application before selecting finish or package size. Intake and Pedal Connections The displayed Injen intake references cover 2006–2015 IS250 2.5L V6 applications. Confirm exact manufacturer coverage, sensor provisions, hose routing and mounting hardware. For pedal devices, verify the supported IS250 application and connector. RC350 or Subaru wording in another device title does not establish IS250 compatibility. Dampers and Window Deflectors Match front-left and front-right dampers individually, including drivetrain and suspension requirements. Different displayed year ranges need their own part-number checks. For the 2006–2013 outside-mount tape-on deflector reference, compare actual body and door configuration. Review four-piece contents, finish and surface-preparation instructions. Choose Your Part Record year, body and drivetrain. Match intake...
View Lexus IS250 Parts and Accessories Products
Compare Lexus IS350 intake and brake-service options using exact production, drivetrain and fitted equipment. Choose physical application and installation scope before finish or compound. Intake and Exterior Accessory Fit The displayed Injen intake versions reference 2006–2020 IS350 3.5L V6 applications. Confirm exact year coverage, sensor provisions, hoses, brackets and emissions requirements. For the listed 2006–2013 tape-on window deflectors, compare body and door configuration, outside-mount pattern and four-piece contents. The intake year range does not establish deflector body coverage. Brake Kits and Pedal Devices Match rear pads and rotors to calipers, backing-plate shape and rotor dimensions. Review F Sport or other brake-package requirements and distinguish supporting hardware from complete friction kits. For a pedal-response device, verify the IS350 connector and supported application. Similar RC350 or unrelated vehicle titles do not replace an exact manufacturer check. C...
View Lexus IS350 Parts and Accessories Products
