AEM C.A.S. 18-20 Kia Stinger L4-2.0L F/I Cold Air Intake from AEM Induction is identified by manufacturer part number 21-867C. This AEM intake system is engineered for 2019-2020 Genesis G70 and the other applications listed below, replacing restrictive factory intake components with application-specific airflow routing and serviceable filtration. The gunmetal gray aluminum intake tube is configured for the factory interfaces used by this application. AEM reports an estimated gain of 10.41 HP @ 4381 RPM for its documented test configuration. Confirm the complete vehicle, engine, trim, and emissions notes in the fitment section before ordering.
Confirm AEM Induction 21-867C against the complete vehicle, engine, trim, and every application note before ordering.
Use the store vehicle selector and current manufacturer application data for final confirmation.
| Brand | AEM Induction |
|---|---|
| Manufacturer Part Number | 21-867C |
| Product Type | Cold Air Intakes |
| Condition | New |
The exact cold air intakes product identified by AEM Induction 21-867C. Additional filters, tubes, couplers, clamps, heat shields, sensors, hardware, or service supplies are included only when specifically shown or stated.
AEM Induction develops vehicle-specific and universal intake, filtration, and supporting components for street and performance applications. Black Ops Auto Works organizes each listing by exact part number and available fitment data to support accurate product selection.
What is the 21-867C?
It is the AEM Induction cold air intakes product described on this page in the listed configuration.
How do I confirm fitment?
Match the complete vehicle, engine, trim, intake layout, dimensions, sensors, and every application note before ordering.
Can I select this product by appearance alone?
No. Similar-looking intake and filter components can use different dimensions, connections, sensor provisions, mounting points, or applications.
What is included?
Only the components specifically identified on this product page are included; related filters, tubes, couplers, clamps, hardware, or service supplies may be separate.
Does an intake require tuning?
Tuning requirements vary by vehicle and intake configuration. Review the product notes and consult a qualified tuner when airflow or sensor behavior changes.
How should I maintain the filter?
Follow the filter-specific manufacturer instructions. Cleaning and treatment procedures vary by filter media and should not be assumed.
Is this product new?
Yes. The item condition is new unless this page explicitly states otherwise.
What should I verify before checkout?
Confirm the application, dimensions, included items, filter type, sensor provisions, emissions notes, and installation requirements.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
AEM Induction parts and accessories are available to browse at Black Ops Auto Works for Mustang, Camaro, Civic Si, WRX, Silverado, F-150, Ram and other import and domestic performance builds. Shop Brute Force intake kits, cold air intakes, short ram systems, DryFlow filters, replacement panels, intake tubes and filter service parts with vehicle specific fitment data for confident ordering. What AEM Induction Covers Cold Air Intake Systems AEM Induction builds vehicle specific cold air intake and short ram systems that replace restrictive factory plumbing while retaining the sensors and mounting points required for the application. Brute Force and Cold Air Induction Truck and Muscle Car Airflow Brute Force kits support popular American trucks and performance cars with large filter area, sealed or open inlet layouts, and application matched intake tubing for reliable daily driving and towing use. DryFlow Filter Technology Oil Free Serviceable Filtration DryFlow synthetic filters ...
View AEM Induction Products
Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...
View Air Intake Systems Products
Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...
View Cold Air Intakes Products
Find Genesis G70 intake and brake components by exact engine, year and installed brake package. Turbo intake and friction-service applications need separate checks. 3.3L Intake and Service-Filter Scope Match the exact Injen reference and production coverage with the installed 3.3L turbo engine. A related Stinger application or G70 name alone should not establish every intake fit. Compare complete tubing/filter contents and installation instructions. A replacement service element and a full intake package are different purchases. Brake Package and Axle Quantities Identify actual caliper, axle, pad dimensions and rotor specifications, preserving any brake-package distinctions. Shared applications need exact manufacturer coverage. Check one rotor versus axle-pair quantity, pad-set contents and supporting hardware. Keep installed brake-conversion references with the service request. Choose Your Part Record exact engine and production. Match intake reference and contents. Identify actua...
View Genesis G70 Parts and Accessories Products
Shop Kia Stinger intake and brake-service options using exact engine, production and installed brake package. Keep 2.0L turbo, 2.5L turbo and 3.3L twin-turbo applications distinct. Intake Layout by Engine Compare the listed Injen systems using their own engine and year coverage. The 3.3L twin-turbo layout has different routing and component requirements from the four-cylinder applications. Review tubing, sensor connections, filters and mounting before choosing red, black or polished finish. Check current application and emissions notes for the selected system. Brake-Package Selection Match front or rear rotors to actual caliper package, diameter, thickness and mounting. Confirm pad shape separately before comparing friction material. Record brake conversions and wheel-clearance changes. Similar Stinger trim names should not replace the installed brake-assembly identification. Choose Your Part Record exact engine, production and drivetrain. Compare intake layout and manufacturer cov...
View Kia Stinger Parts and Accessories Products
