AEM Induction 2019 Volkswagen Jetta 1.4L Cold Air Intake from AEM Induction is identified by manufacturer part number 21-862C. This AEM intake system is engineered for 2019-2021 Volkswagen Jetta and the other applications listed below, replacing restrictive factory intake components with application-specific airflow routing and serviceable filtration. The black aluminum intake tube is configured for the factory interfaces used by this application. AEM reports an estimated gain of 7 HP @ 4039 RPM for its documented test configuration. Confirm the complete vehicle, engine, trim, and emissions notes in the fitment section before ordering.
Confirm AEM Induction 21-862C against the complete vehicle, engine, trim, and every application note before ordering.
Use the store vehicle selector and current manufacturer application data for final confirmation.
| Brand | AEM Induction |
|---|---|
| Manufacturer Part Number | 21-862C |
| Product Type | Cold Air Intakes |
| Condition | New |
The exact cold air intakes product identified by AEM Induction 21-862C. Additional filters, tubes, couplers, clamps, heat shields, sensors, hardware, or service supplies are included only when specifically shown or stated.
AEM Induction develops vehicle-specific and universal intake, filtration, and supporting components for street and performance applications. Black Ops Auto Works organizes each listing by exact part number and available fitment data to support accurate product selection.
What is the 21-862C?
It is the AEM Induction cold air intakes product described on this page in the listed configuration.
How do I confirm fitment?
Match the complete vehicle, engine, trim, intake layout, dimensions, sensors, and every application note before ordering.
Can I select this product by appearance alone?
No. Similar-looking intake and filter components can use different dimensions, connections, sensor provisions, mounting points, or applications.
What is included?
Only the components specifically identified on this product page are included; related filters, tubes, couplers, clamps, hardware, or service supplies may be separate.
Does an intake require tuning?
Tuning requirements vary by vehicle and intake configuration. Review the product notes and consult a qualified tuner when airflow or sensor behavior changes.
How should I maintain the filter?
Follow the filter-specific manufacturer instructions. Cleaning and treatment procedures vary by filter media and should not be assumed.
Is this product new?
Yes. The item condition is new unless this page explicitly states otherwise.
What should I verify before checkout?
Confirm the application, dimensions, included items, filter type, sensor provisions, emissions notes, and installation requirements.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
AEM Induction parts and accessories are available to browse at Black Ops Auto Works for Mustang, Camaro, Civic Si, WRX, Silverado, F-150, Ram and other import and domestic performance builds. Shop Brute Force intake kits, cold air intakes, short ram systems, DryFlow filters, replacement panels, intake tubes and filter service parts with vehicle specific fitment data for confident ordering. What AEM Induction Covers Cold Air Intake Systems AEM Induction builds vehicle specific cold air intake and short ram systems that replace restrictive factory plumbing while retaining the sensors and mounting points required for the application. Brute Force and Cold Air Induction Truck and Muscle Car Airflow Brute Force kits support popular American trucks and performance cars with large filter area, sealed or open inlet layouts, and application matched intake tubing for reliable daily driving and towing use. DryFlow Filter Technology Oil Free Serviceable Filtration DryFlow synthetic filters ...
View AEM Induction Products
Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...
View Air Intake Systems Products
Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...
View Cold Air Intakes Products
Volkswagen parts and accessories for Golf, GTI, Golf R, Jetta, Passat, Tiguan, Atlas, Beetle, CC, e-Golf, and I.D. Buzz are stocked at Black Ops Auto Works. Shop lowering springs, coilovers, sway bars, control arm bushings, brake pads, brake rotors, brake kits, cat-back exhaust systems, control arms, flexlines, and floor mats for MK3 through MK8 platforms and the 8V/8Y Audi-shared chassis. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 875 Volkswagen SKUs across suspension, brakes, exhaust, and interior categories. What This Collection Covers Volkswagen has sold Golf, GTI, Jetta, Passat, Tiguan, and Atlas models across several generations in the United States, and suspension, brake, and exhaust fitment changes with each chassis update. This collection groups parts confirmed to fit the correct MK generation and engine so MK3 8V owners, MK6 Jetta owners, and current MK7/MK8 Golf ...
View Volkswagen Products
