The aFe Takeda axle-back exhaust system 49-36083-B is a precision-engineered replacement for your vehicle's restrictive factory exhaust, built from 304 stainless steel in 5" pipe diameter for reduced backpressure and genuine performance gains. Connects at the rear axle and replaces only the muffler and tip section. The 49-36083-B is fully mandrel-bent for consistent interior diameter throughout every curve, preserving exhaust gas velocity from the collector to the tailpipe. The result is improved power delivery across the RPM range, a more aggressive exhaust note, and a black powder-coated tip that improves the look of the rear fascia.
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2014 | Toyota | Corolla | Le Eco Plus |
| 2014-2016 | Toyota | Corolla | S |
| 2014-2019 | Toyota | Corolla | L |
| 2014-2019 | Toyota | Corolla | LE |
| 2014-2019 | Toyota | Corolla | LE Eco |
| 2016 | Toyota | Corolla | Special Edition |
| 2017 | Toyota | Corolla | 50th Anniversary Special Edition |
| 2017-2019 | Toyota | Corolla | SE |
| 2017-2019 | Toyota | Corolla | XLE |
| 2017-2019 | Toyota | Corolla | XSE |
| Detail | Value |
|---|---|
| Part Number | 49-36083-B |
| Brand | aFe Power |
| Product Line | aFe Takeda |
| Material | 304 Stainless Steel |
| Pipe Diameter | 5" |
| Tip Finish | Black Powder-Coated |
| Mounting | Factory hangers and OEM bolt positions |
| UPC | 802959637272 |
In most applications, a bolt-on cat-back or axle-back exhaust does not require a tune. If you are also running a downpipe or header, a tune is strongly recommended to fully realize the power gains and prevent any lean conditions. Always consult your tuner when building a full exhaust setup.
Is this exhaust too loud for daily driving?The aFe Takeda is designed to produce an enhanced exhaust note without excessive interior drone at highway speed. At idle and during spirited acceleration, the sound is noticeably more aggressive than stock. Sound level varies by vehicle platform and individual preference.
Does this exhaust maintain OEM ground clearance?Yes. The 49-36083-B is designed around OEM ground clearance specifications. If your vehicle is lowered, inspect clearance at the lowest point during test-fit before final installation to confirm no contact with body or suspension components.
Are all clamps, gaskets, and hangers included?Yes. The 49-36083-B ships complete with all clamps, gaskets, and hardware needed for the installation. No separate hardware purchases are required for a standard bolt-on installation.
How much power gain can I expect from this exhaust?Gains vary by vehicle, engine, and supporting modifications. A cat-back exhaust alone typically contributes 5 to 15 hp on naturally aspirated engines. On turbocharged or supercharged applications, a full exhaust system combined with a tune can yield significantly larger gains.
Will this exhaust void my warranty?Under the Magnuson-Moss Warranty Act, an exhaust upgrade alone cannot be used to void your powertrain warranty unless the dealer can prove it directly caused a specific failure. For any drivetrain or emissions-related service, discuss this with your service advisor before work begins.
Is this exhaust compatible with my OEM tips if I want to keep them?The 49-36083-B comes with its own black powder-coated tip. If you prefer different tips, the pipe outlet dimensions are listed in the product specs and compatible aftermarket tips from vendors like Borla or Magnaflow can be substituted. Contact us to confirm outlet sizing for your specific application.
What is the maintenance requirement on a stainless steel exhaust?Stainless steel exhaust systems require minimal maintenance. Periodic cleaning with a stainless steel polish keeps the tips and visible pipe sections looking their best. Inspect the mounting hardware once a season in regions that use road salt in winter months.
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
aFe Power cold air intakes, air filters, and cat-back exhaust systems for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop aFe Momentum GT intakes, Magnum FORCE intakes, Pro DRY S and Pro 5R filters, Takeda intakes and exhausts, Vulcan Series exhaust, Rock Basher axle-back systems, throttle body spacers, intercoolers, and diesel performance parts for RAM Cummins, GM Duramax, Ford Bronco, Toyota Tacoma, Jeep Gladiator, and Dodge Hellcat platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2778 aFe Power SKUs across intake, filtration, exhaust, cooling, and diesel performance categories. What This Brand Covers aFe Power, short for Advanced FLOW Engineering, builds airflow focused performance parts engineered around dyno testing and CFD analysis rather than generic universal fitment. The catalog spans cold air intake systems, replacement and reusab...
View aFe Products
Axle back exhaust systems for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop single and dual exit axle back systems, valved axle back exhausts, stainless steel and titanium tip options, black chrome and carbon fiber tips, and vehicle specific axle back kits for Corvette, Mustang, WRX, Miata, Corolla, Bronco, and Explorer platforms from MBRP, Borla, MagnaFlow, AWE Tuning, Corsa, and aFe. Every axle back system is filterable by year, make, model, trim, engine, and drivetrain so the correct diameter, tip style, and mounting hardware ships the first time. Black Ops Auto Works carries 611 axle back SKUs across single exit, dual exit, and valved categories. What This Collection Covers Axle back exhaust replaces everything from the rear axle back, typically the muffler, resonator if equipped, and exhaust tips, without touching the catalytic converter, mid pipe, or headers. It is the most common entry point into aftermarket exhaust because it focuse...
View Axle Back Products
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
