Click to zoom in
The Performance Exhaust Axle-Back Exhaust System Built for Sound and Flow
The aFe Performance Exhaust axle-back exhaust system 49-43147 is a precision-engineered replacement for your vehicle's restrictive factory exhaust, built from 409 stainless steel in 3" pipe diameter for reduced backpressure and genuine performance gains. Connects at the rear axle and replaces only the muffler and tip section. The 49-43147 is fully mandrel-bent for consistent interior diameter throughout every curve, preserving exhaust gas velocity from the collector to the tailpipe. The result is improved power delivery across the RPM range, a more aggressive exhaust note, and a polished stainless tip that improves the look of the rear fascia.
Key Features
- Material: 409 stainless steel, TIG-welded joints
- Pipe diameter: 3" mandrel-bent for consistent flow
- Tip finish: polished stainless
- Direct bolt-on using factory mounting points and hangers
- Reduces backpressure for measurable power and torque gains
- Aggressive exhaust note without excessive drone at highway speed
- All hardware and gaskets included for straightforward installation
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2021 | Ford | Bronco | First Edition |
| 2021-2023 | Ford | Bronco | |
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2021-2024 | Ford | Bronco | Wildtrak |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2024 | Ford | Bronco | Heritage Edition |
Specifications
| Detail | Value |
|---|---|
| Part Number | 49-43147 |
| Brand | aFe Power |
| Product Line | aFe Performance Exhaust |
| Material | 409 Stainless Steel |
| Pipe Diameter | 3" |
| Tip Finish | Polished Stainless |
| Mounting | Factory hangers and OEM bolt positions |
| UPC | 802959604359 |
What's Included
- aFe Performance Exhaust axle-back exhaust system (49-43147)
- All required clamps, gaskets, and hardware
- Installation instructions
Frequently Asked Questions
Will this exhaust require a tune after installation?In most applications, a bolt-on cat-back or axle-back exhaust does not require a tune. If you are also running a downpipe or header, a tune is strongly recommended to fully realize the power gains and prevent any lean conditions. Always consult your tuner when building a full exhaust setup.
Is this exhaust too loud for daily driving?The aFe Performance Exhaust is designed to produce an enhanced exhaust note without excessive interior drone at highway speed. At idle and during spirited acceleration, the sound is noticeably more aggressive than stock. Sound level varies by vehicle platform and individual preference.
Does this exhaust maintain OEM ground clearance?Yes. The 49-43147 is designed around OEM ground clearance specifications. If your vehicle is lowered, inspect clearance at the lowest point during test-fit before final installation to confirm no contact with body or suspension components.
Are all clamps, gaskets, and hangers included?Yes. The 49-43147 ships complete with all clamps, gaskets, and hardware needed for the installation. No separate hardware purchases are required for a standard bolt-on installation.
How much power gain can I expect from this exhaust?Gains vary by vehicle, engine, and supporting modifications. A cat-back exhaust alone typically contributes 5 to 15 hp on naturally aspirated engines. On turbocharged or supercharged applications, a full exhaust system combined with a tune can yield significantly larger gains.
Will this exhaust void my warranty?Under the Magnuson-Moss Warranty Act, an exhaust upgrade alone cannot be used to void your powertrain warranty unless the dealer can prove it directly caused a specific failure. For any drivetrain or emissions-related service, discuss this with your service advisor before work begins.
Is this exhaust compatible with my OEM tips if I want to keep them?The 49-43147 comes with its own polished stainless tip. If you prefer different tips, the pipe outlet dimensions are listed in the product specs and compatible aftermarket tips from vendors like Borla or Magnaflow can be substituted. Contact us to confirm outlet sizing for your specific application.
What is the maintenance requirement on a stainless steel exhaust?Stainless steel exhaust systems require minimal maintenance. Periodic cleaning with a stainless steel polish keeps the tips and visible pipe sections looking their best. Inspect the mounting hardware once a season in regions that use road salt in winter months.
Installation Overview
- Safely lift and support the vehicle to gain access to the full exhaust system
- Allow the OEM exhaust to cool completely before beginning
- Apply penetrating oil to all exhaust flange bolts and hangers at least 15 minutes prior to removal
- Remove the OEM exhaust section by section, starting from the rearmost component
- Compare the new 49-43147 sections against the removed OEM pieces to confirm lengths and clocking
- Hang the new exhaust onto the factory hangers, starting from the front connection point
- Install all flange bolts and clamps without fully tightening to allow for alignment adjustment
- Adjust all sections for clearance from body panels, fuel lines, and brake lines
- Torque all hardware to specification and verify tip alignment before lowering
- Start the engine and check for exhaust leaks at all joints before the first drive
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
aFe
aFe Power cold air intakes, air filters, and cat-back exhaust systems for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop aFe Momentum GT intakes, Magnum FORCE intakes, Pro DRY S and Pro 5R filters, Takeda intakes and exhausts, Vulcan Series exhaust, Rock Basher axle-back systems, throttle body spacers, intercoolers, and diesel performance parts for RAM Cummins, GM Duramax, Ford Bronco, Toyota Tacoma, Jeep Gladiator, and Dodge Hellcat platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2778 aFe Power SKUs across intake, filtration, exhaust, cooling, and diesel performance categories. What This Brand Covers aFe Power, short for Advanced FLOW Engineering, builds airflow focused performance parts engineered around dyno testing and CFD analysis rather than generic universal fitment. The catalog spans cold air intake systems, replacement and reusab...
View aFe Products
Axle Back
Axle back exhaust systems for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop single and dual exit axle back systems, valved axle back exhausts, stainless steel and titanium tip options, black chrome and carbon fiber tips, and vehicle specific axle back kits for Corvette, Mustang, WRX, Miata, Corolla, Bronco, and Explorer platforms from MBRP, Borla, MagnaFlow, AWE Tuning, Corsa, and aFe. Every axle back system is filterable by year, make, model, trim, engine, and drivetrain so the correct diameter, tip style, and mounting hardware ships the first time. Black Ops Auto Works carries 611 axle back SKUs across single exit, dual exit, and valved categories. What This Collection Covers Axle back exhaust replaces everything from the rear axle back, typically the muffler, resonator if equipped, and exhaust tips, without touching the catalytic converter, mid pipe, or headers. It is the most common entry point into aftermarket exhaust because it focuse...
View Axle Back Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
Ford Bronco Parts & Accessories
Ford Bronco parts and accessories for the 2-door, 4-door, Bronco Raptor, and classic Bronco are stocked at Black Ops Auto Works. Shop lift kits, coilovers, shocks, springs, upper control arms, sway bar drop kits, cold air intakes, turbocharger kits, cat-back exhaust, front and rear bumpers, rock sliders, skid plates, light bars, A-pillar lights, MOLLE storage panels, and brake rotors for the 2.3L, 2.7L, and 3.0L EcoBoost engines. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 824 Ford Bronco SKUs across suspension, off-road protection, lighting, and performance categories. What This Collection Covers The current Ford Bronco lineup spans the 2-door, 4-door, and 3.0L Bronco Raptor, each with different suspension travel, brake sizing, and bodywork, while the classic Bronco from 1980 to 1996 uses its own separate parts pool. This collection groups parts confirmed to fit the correct...
View Ford Bronco Parts & Accessories Products