Sold out
Click to zoom in
Keep Your MagnumFORCE Intake Sealed and Leak Free
The aFe MagnumFORCE Spare Parts AIS Soft Parts kit for XX-80932 replaces the clamps and couplings on compatible aFe cold air intake systems. Over time, silicone couplers and hose clamps wear from heat cycling and vibration, and this kit restores a tight, leak free seal without replacing the entire intake system.
Key Features
- Direct replacement clamp and coupling kit for compatible aFe 80932 series intake systems
- Restores factory tight seal at intake coupling points
- Silicone coupler construction resists heat and cracking better than stock rubber
- Simple bolt on replacement using factory mounting points
- Cost effective way to extend the service life of an existing intake system
Specifications
| Detail | Value |
|---|---|
| aFe Part Number | 59-80932 |
| Compatible System | aFe Intake System XX-80932 |
| Kit Contents | Replacement clamps and silicone couplings |
| UPC | 802959591048 |
| Warranty | Manufacturer limited warranty |
What's Included
- Replacement silicone couplings
- Replacement hose clamps
- Installation hardware as needed for the compatible intake system
About aFe
aFe Power has built a reputation for engineering intake and exhaust systems that improve airflow while standing up to daily driving and towing conditions. Their MagnumFORCE line of cold air intakes is supported by a full range of spare parts, so builders can maintain peak performance without replacing an entire system over a worn clamp or coupler.
Related Parts on Our Site
FAQ
What is the aFe 59-80932?The 59-80932 is a replacement clamp and coupling kit designed to service the soft parts on a compatible aFe MagnumFORCE intake system, restoring a proper seal at the intake connection points.
When should I replace the clamps and couplings on my aFe intake?Replace them if you notice cracking, hardening, or a whistling/hissing sound from the intake tract, which usually indicates a worn silicone coupler or a loose clamp.
Will this kit fit any aFe cold air intake?No. This kit is designed specifically as a spare parts replacement for a compatible MagnumFORCE intake system and is not a universal fit for all aFe intakes.
Do I need to remove the entire intake system to install this kit?In most cases you only need to loosen the existing clamps and swap the worn coupling sections, without fully removing the intake tube or filter.
Can a worn coupling or clamp cause a check engine light?Yes. A vacuum leak from a cracked coupling or loose clamp can trigger lean codes or a check engine light, and replacing the soft parts often resolves the issue.
Is this kit a bolt on installation?Yes. The kit uses the factory mounting and clamp points on the compatible intake system for a straightforward installation.
How long do factory intake couplings typically last?Factory and OEM style couplings typically last several years, but heat cycling, oil exposure, and vibration can accelerate wear, especially in high mileage or heavily driven vehicles.
Does this kit include a new air filter?No. This kit only replaces the clamps and couplings and does not include a replacement air filter element.
Install Instructions
- Confirm the engine is cool before beginning installation
- Loosen and remove the existing worn clamps at each coupling point
- Remove the worn silicone couplings from the intake tube and filter housing
- Install the new couplings included in this kit at each connection point
- Install and tighten the new clamps to a secure, leak free fit
- Start the engine and check for any air leaks or unusual noise at the intake tract
aFe
Shop aFe Power performance parts at Black Ops Auto Works for vehicle-specific airflow, filtration, exhaust, cooling, suspension, and diesel performance upgrades. aFe Power, also known as Advanced FLOW Engineering, is trusted by performance enthusiasts for cold air intakes, air filters, cat-back exhaust systems, DPF-back exhaust systems, axle-back exhausts, throttle body spacers, intercoolers, charge pipes, differential covers, sway bars, wheel spacers, and diesel truck upgrades. Whether you drive a daily driver, diesel truck, off-road build, turbo car, muscle car, SUV, or track-focused performance vehicle, Black Ops Auto Works carries aFe Power parts designed to improve airflow, throttle response, exhaust flow, cooling efficiency, drivetrain durability, and overall performance. Shop aFe Power Parts by Category Browse aFe Power upgrades across popular performance categories, including: aFe cold air intakes aFe air filters aFe cat-back exhaust systems aFe axle-back exhaust systems aF...
View aFe Products
Air Intake Components
Air intake components control how filtered air enters the engine, directly affecting throttle response, power output, and fuel efficiency. Upgrading the intake path from the filter to the throttle body is one of the most accessible performance modifications available for nearly any vehicle.Popular UpgradesCold air intake kits are the most common upgrade, relocating the filter to a cooler area of the engine bay and replacing the restrictive factory airbox with a mandrel-bent tube for improved flow. Short ram intakes keep the filter closer to the engine for a more compact installation while still outperforming stock setups. Replacement performance air filters let you upgrade within the factory airbox without changing any tubing, which works well for vehicles where airbox location is optimal.What performance gains can I expect from an air intake upgrade?Gains depend on the vehicle and existing intake setup. Most naturally aspirated vehicles see modest horsepower increases in the 5–15 h...
View Air Intake Components Products
Air Intake Systems
Air Intake Systems, Cold Air Intakes & Performance Intake Parts Shop premium air intake systems, cold air intakes, short ram intakes, air boxes, intake components, intake elbows, mass air flow sensors, scoops, snorkels, recharge kits, silicone couplers, and intake hoses at Black Ops Auto Works. This collection is built for enthusiasts looking to improve airflow, throttle response, induction sound, horsepower potential, and under-hood performance across cars, trucks, SUVs, Jeeps, muscle cars, off-road builds, and supercharged HEMI platforms. Whether you are upgrading a daily driver, Dodge Charger, Dodge Challenger, Dodge Durango, Jeep Grand Cherokee, Jeep Trackhawk, Ram TRX, Ram RHO, Toyota Tundra, Chevy Silverado, Chevrolet Camaro, Corvette, BMW, Cadillac CTS-V, Honda, Hyundai, Infiniti, or a custom performance build, our Air Intake Systems collection includes parts designed for fitment, durability, and real-world performance. Air Intake Systems from Top Brands Shop trusted air ...
View Air Intake Systems Products