Click to zoom in
Precision-Built Precision Leveling Kit for the 2023-2024 Toyota Sequoia
The aFe Control leveling kit 416-72T009-R delivers a factory-quality front lift that levels the stance of the vehicle without affecting load-carrying capacity or ride quality for the 2023-2024 Toyota Sequoia. Built from aircraft-grade aluminum and engineered to OEM or better fitment standards, the 416-72T009-R installs using factory mounting points with no cutting, welding, or permanent modification to the chassis. Every component is precision-machined and tested to withstand the thermal and mechanical loads of both daily commuting and performance driving, giving you a measurable improvement in handling character the moment you leave the driveway.
Key Features
- Material: aircraft-grade aluminum construction for strength and corrosion resistance
- Direct bolt-on using factory mounting points, no chassis modification required
- Precision-machined for consistent, repeatable fitment
- Improved handling balance, reduced body roll, and enhanced driver feel
- Compatible with factory wheel and tire sizes (verify clearance for larger setups)
- Backed by aFe Power limited manufacturer warranty
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2022-2024 | Toyota | Tundra | TRD Pro |
| 2023-2024 | Toyota | Sequoia | TRD Pro |
Specifications
| Detail | Value |
|---|---|
| Part Number | 416-72T009-R |
| Brand | aFe Power / aFe Control |
| Component Type | Leveling Kit |
| Material | Aircraft-Grade Aluminum |
| Mounting | Direct bolt-on, OEM hardware |
| UPC | 802959008232 |
What's Included
- aFe Control leveling kit (416-72T009-R)
- All required mounting hardware
- Installation instructions
Frequently Asked Questions
Will this suspension component require an alignment after installation?Yes. Any suspension component that affects wheel geometry, including control arms, lowering springs, coilovers, and lift kits, requires a four-wheel alignment after installation. Driving on a significantly out-of-alignment vehicle accelerates tire wear and compromises handling safety.
Is this compatible with other suspension modifications I already have installed?In most cases, yes. However, with stacked suspension modifications, always verify component clearances and maximum travel ranges. If you are running a combination of lift, aftermarket wheels, and larger tires, consult an alignment specialist familiar with your platform before finalizing the build.
Does the Magnuson-Moss Warranty Act protect my powertrain warranty with this upgrade?Yes. Under the Magnuson-Moss Warranty Act, a dealer cannot void your vehicle warranty solely because you installed aftermarket suspension components. They must demonstrate a direct causal link between the suspension modification and any specific failure they are declining to cover.
How long does installation typically take?Installation time varies by component type. A strut brace or sway bar end link set can be completed in one to two hours. A full coilover or control arm replacement typically takes four to six hours in a properly equipped shop. Always factor in time for a post-installation alignment.
Can I install this at home or does it require a shop?Many of these components can be installed at home with standard hand tools and a floor jack and jack stands. Coilovers and control arms require spring compressors or a press for certain steps and benefit from a shop alignment lift. Evaluate your specific toolkit and comfort level before committing to a DIY install.
Will this affect my vehicle's ride quality for daily driving?Performance suspension upgrades are designed to improve handling precision. Sway bars, control arms, and strut braces stiffen lateral dynamics while leaving ride compliance largely intact. Coilovers and lowering springs will reduce ride height and typically firm the ride relative to factory. The trade-off between sport handling and daily comfort varies by product selection.
Is this product backed by a warranty?aFe Power provides a limited manufacturer warranty on all suspension products covering defects in materials and workmanship. Coverage does not include damage from improper installation, racing use, off-road impacts, or modification of the components. Contact aFe Power or us for full warranty details.
What if this kit doesn't fit my specific trim or submodel?Refer to the fitment table above for confirmed compatible year ranges and trim levels. If your specific configuration is not listed, contact us before purchasing. We can verify fitment details with aFe Power to ensure the correct part is ordered.
Installation Overview
- Safely raise and support the vehicle on a level surface using proper jack stands under the frame
- Remove the wheel for full access to the suspension mounting points if required by your specific component
- Take photographs of the factory orientation for all mounting hardware positions before disassembly
- Remove factory components in the reverse order of installation, keeping hardware organized
- Install the new 416-72T009-R in the factory mounting positions, hand-threading all hardware first
- Confirm all components are properly seated and aligned before final torquing
- Torque all hardware to specification in the correct sequence as specified in the instructions
- Reinstall the wheel, lower the vehicle, and perform a visual inspection before driving
- Schedule a four-wheel alignment at a qualified shop before regular driving
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
aFe
aFe Power cold air intakes, air filters, and cat-back exhaust systems for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop aFe Momentum GT intakes, Magnum FORCE intakes, Pro DRY S and Pro 5R filters, Takeda intakes and exhausts, Vulcan Series exhaust, Rock Basher axle-back systems, throttle body spacers, intercoolers, and diesel performance parts for RAM Cummins, GM Duramax, Ford Bronco, Toyota Tacoma, Jeep Gladiator, and Dodge Hellcat platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2778 aFe Power SKUs across intake, filtration, exhaust, cooling, and diesel performance categories. What This Brand Covers aFe Power, short for Advanced FLOW Engineering, builds airflow focused performance parts engineered around dyno testing and CFD analysis rather than generic universal fitment. The catalog spans cold air intake systems, replacement and reusab...
View aFe Products
Leveling Kits
Leveling Kits parts and accessories for Silverado, F-150, Ram, Tacoma, Tundra, Jeep Wrangler and Ford Bronco are stocked at Black Ops Auto Works. Shop front leveling kits, coil spacer kits, strut spacers, torsion keys, upper control arm kits, spring spacers, truck leveling hardware, shock packages and alignment components for street builds, tow rigs, restorations and track-focused projects. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 155 Leveling Kits SKUs across front spacers, strut extensions, torsion keys, coil spacers and upper control arms. Front Leveling Kits Correct factory rake Most trucks leave the factory with the rear higher than the front to accommodate payload. A front leveling kit raises the front to reduce that rake and can create clearance for a carefully selected wheel and tire package. Spacer, Strut and Torsion Designs Match the kit to the suspension Strut s...
View Leveling Kits Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products