aFe 2022 Toyota Tundra V6-3.5L (w/ Self-Leveling Air Suspension) Rear Leveling Kit aFe AFE416-72T006-A
aFe 2022 Toyota Tundra V6-3.5L (w/ Self-Leveling Air Suspension) Rear Leveling Kit - aFe 416-72T006-A
aFe 2022 Toyota Tundra V6-3.5L (w/ Self-Leveling Air Suspension) Rear Leveling Kit aFe AFE416-72T006-A
Click to zoom in

aFe 2022 Toyota Tundra V6-3.5L (w/ Self-Leveling Air Suspension) Rear Leveling Kit

aFe
AFE416-72T006-A
802959007785
Leveling Kits
2 Units In Stock
aFe, Leveling Kits, Suspension
$ 34.00
$ 34.00

This aFe suspension component is the 2022 Toyota Tundra V6-3.5L (w/ Self-Leveling Air Suspension) Rear Leveling Kit for 2022 Toyota Tundra. Verify drivetrain, trim, ride-height range, bar or spring rate, mounting points, wheel and tire clearance, alignment needs, and intended street or off-road use.

Key Features

  • Material: aircraft-grade aluminum construction for strength and corrosion resistance.
  • Direct bolt-on using factory mounting points, no chassis modification required.
  • Precision-machined for consistent, repeatable fitment.
  • Schedule a four-wheel alignment at a qualified shop before regular driving.

Fitment

Years Make Model Application
2022 Toyota Tundra 1794 Edition
2022 Toyota Tundra Limited
2022 Toyota Tundra Platinum
2022 Toyota Tundra SR
2022 Toyota Tundra SR5

Specifications

Brand aFe Power
Manufacturer Part Number 416-72T006-A
Product Type Leveling Kits
Condition New
Configuration 2022 Toyota Tundra V6-3.5L (w/ Self-Leveling Air Suspension) Rear Leveling Kit
Material aircraft-grade aluminum construction for strength and corrosion resistance
Detail Value
Component Type Leveling Kit
Mounting Direct bolt-on, OEM hardware
UPC 802959007785
WARNING This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

What's Included

One new aFe leveling kit in the exact configuration and quantity identified by this listing. Hardware, clamps, couplers, gaskets, sensors, wiring, fluids, calibration, and accessories are included only when expressly stated.

About aFe Power

aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.

Important Disclosures

  • California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

Frequently Asked Questions

Will the 2022 Toyota Tundra V6-3.5L (w/ Self-Leveling Air Suspension) Rear Leveling Kit fit my suspension configuration (aFe 416-72T006-A)?
Match drivetrain, trim, factory suspension, ride height, wheel and tire package, and any exclusions shown for this exact product.

Will an alignment be required?
An alignment is recommended whenever ride height or suspension geometry changes and may also be needed after replacing bars, arms, links, or mounts.

Does the kit change ride quality?
Ride and handling depend on rates, adjustment, bushings, tire setup, and installation. Use the settings recommended for the intended street or off-road use.

Should fasteners be rechecked after installation?
Yes. Torque fasteners at the specified suspension position, inspect clearance, and recheck hardware after the initial driving cycle.

Installation Instructions

  1. Confirm aFe part number 416-72T006-A, the complete vehicle or specification-based application, and all required supporting components.
  2. Support the vehicle at approved points, record ride height and alignment condition, and compare every mount and component before disassembly.
  3. Install hardware in the documented orientation and torque sequence, tightening pivot bushings at the specified ride position where required.
  4. Verify full steering and suspension travel, wheel and tire clearance, alignment, and fastener torque before normal driving.
aFe

aFe

Shop aFe Power cold air intakes, air filters, exhaust systems, intercoolers, charge pipes, tuning modules, suspension parts, drivetrain components, and truck accessories. Match every part by exact aFe manufacturer number and verify the complete vehicle, engine, drivetrain, emissions classification, dimensions, and included hardware before ordering. Cold Air Intakes and Performance Filters Choose an aFe intake by exact vehicle and engine application, then compare tube design, sensor provisions, housing configuration, emissions status, and filter media. Pro DRY S dry media is serviced without filter oil, while oiled media options follow their own cleaning and re-oiling procedures. Replacement and universal filters must be matched by flange size, panel dimensions, seal design, height, and airflow direction. aFe Power Exhaust Systems and Emissions Fitment Cat-back, axle-back, DPF-back, header, downpipe, mid-pipe, and related exhaust parts can vary by body style, cab and bed, wheelbase...

View aFe Products
Leveling Kits

Leveling Kits

Shop truck and SUV leveling kits at Black Ops Auto Works. Compare front strut spacers, coil spacers, torsion-key kits, matched suspension packages, and selected rear load-leveling systems. Find application-specific options for Silverado, Sierra, F-150, Super Duty, Ram, Tacoma, Tundra, Wrangler, Bronco, and other listed vehicles. Front Leveling Kits for Trucks and SUVs Front leveling kits typically raise the front of a vehicle to reduce its nose-down stance, often called factory rake. The correct amount of height change depends on the vehicle's existing suspension, current measurements, and intended use. Measure the vehicle on level ground before selecting a kit. Account for existing modifications and regular cargo or trailer loads rather than assuming every truck needs the same two-inch or three-inch front adjustment. Strut Spacers, Coil Spacers, and Torsion Keys This collection includes different leveling methods for different suspension designs. Strut spacers, coil-spring spacers,...

View Leveling Kits Products
Suspension

Suspension

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

View Suspension Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×