Size Chart
×
This aFe suspension component is the CONTROL 23-24 Chevrolet Colorado ZR2 / GMC Canyon AT4X L4 2.7L (t) 1.25in Leveling Kit - Red for 2023-2024 Chevrolet Colorado. Verify drivetrain, trim, ride-height range, bar or spring rate, mounting points, wheel and tire clearance, alignment needs, and intended street or off-road use.
Key Features
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2023-2024 | Chevrolet | Colorado | ZR2 |
| 2023-2024 | GMC | Canyon | AT4X |
Specifications
| Brand | aFe Power |
|---|---|
| Manufacturer Part Number | 416-40T002-R |
| Product Type | Leveling Kits |
| Condition | New |
| Configuration | CONTROL 23-24 Chevrolet Colorado ZR2 / GMC Canyon AT4X L4 2.7L (t) 1.25in Leveling Kit - Red |
| Material | aircraft-grade aluminum construction for strength and corrosion resistance |
| Finish | red anodized for long-term durability |
| Detail | Value |
| Component Type | Leveling Kit |
| Color | Red Anodized |
| Mounting | Direct bolt-on, OEM hardware |
| UPC | 802959008454 |
| Key Features Material | aircraft-grade aluminum construction for strength and corrosion resistance |
| WARNING | This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov. |
| Listed Dimension | 1.25in |
What's Included
One new aFe leveling kit in the exact configuration and quantity identified by this listing. Hardware, clamps, couplers, gaskets, sensors, wiring, fluids, calibration, and accessories are included only when expressly stated.
About aFe Power
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
Important Disclosures
Related Parts
Frequently Asked Questions
Will the CONTROL 23-24 Chevrolet Colorado ZR2 / GMC Canyon AT4X L4 2.7L (t) 1.25in Leveling Kit - Red fit my suspension configuration (aFe 416-40T002-R)?
Match drivetrain, trim, factory suspension, ride height, wheel and tire package, and any exclusions shown for this exact product.
Will an alignment be required?
An alignment is recommended whenever ride height or suspension geometry changes and may also be needed after replacing bars, arms, links, or mounts.
Does the kit change ride quality?
Ride and handling depend on rates, adjustment, bushings, tire setup, and installation. Use the settings recommended for the intended street or off-road use.
Should fasteners be rechecked after installation?
Yes. Torque fasteners at the specified suspension position, inspect clearance, and recheck hardware after the initial driving cycle.
Installation Instructions
Shop aFe Power cold air intakes, air filters, exhaust systems, intercoolers, charge pipes, tuning modules, suspension parts, drivetrain components, and truck accessories. Match every part by exact aFe manufacturer number and verify the complete vehicle, engine, drivetrain, emissions classification, dimensions, and included hardware before ordering. Cold Air Intakes and Performance Filters Choose an aFe intake by exact vehicle and engine application, then compare tube design, sensor provisions, housing configuration, emissions status, and filter media. Pro DRY S dry media is serviced without filter oil, while oiled media options follow their own cleaning and re-oiling procedures. Replacement and universal filters must be matched by flange size, panel dimensions, seal design, height, and airflow direction. aFe Power Exhaust Systems and Emissions Fitment Cat-back, axle-back, DPF-back, header, downpipe, mid-pipe, and related exhaust parts can vary by body style, cab and bed, wheelbase...
View aFe Products
Shop truck and SUV leveling kits at Black Ops Auto Works. Compare front strut spacers, coil spacers, torsion-key kits, matched suspension packages, and selected rear load-leveling systems. Find application-specific options for Silverado, Sierra, F-150, Super Duty, Ram, Tacoma, Tundra, Wrangler, Bronco, and other listed vehicles. Front Leveling Kits for Trucks and SUVs Front leveling kits typically raise the front of a vehicle to reduce its nose-down stance, often called factory rake. The correct amount of height change depends on the vehicle's existing suspension, current measurements, and intended use. Measure the vehicle on level ground before selecting a kit. Account for existing modifications and regular cargo or trailer loads rather than assuming every truck needs the same two-inch or three-inch front adjustment. Strut Spacers, Coil Spacers, and Torsion Keys This collection includes different leveling methods for different suspension designs. Strut spacers, coil-spring spacers,...
View Leveling Kits Products
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products