Sold out
aFe Control Lowering Springs 08-13 BMW M3 (E90/92) aFe AFE410-503006-N
aFe Control Lowering Springs 08-13 BMW M3 (E90/92) aFe AFE410-503006-N
aFe Control Lowering Springs 08-13 BMW M3 (E90/92) aFe AFE410-503006-N
Click to zoom in

aFe Control Lowering Springs 08-13 BMW M3 (E90/92)

aFe
AFE410-503006-N
802959001301
Lowering Springs
Out of stock
$ 376.00

This aFe suspension component is the Control Lowering Springs 08-13 BMW M3 (E90/92) for 2008-2013 BMW M3. Verify drivetrain, trim, ride-height range, bar or spring rate, mounting points, wheel and tire clearance, alignment needs, and intended street or off-road use.

Key Features

  • Application-specific handling or ride-height configuration
  • Mounting, alignment, clearance, rate, adjustment, and intended-use requirements are model specific

Fitment

Years Make Model Application
2008-2013 BMW M3 Base

Specifications

Brand aFe Power
Manufacturer Part Number 410-503006-N
Product Type Lowering Springs
Condition New
Configuration Control Lowering Springs 08-13 BMW M3 (E90/92)

What's Included

One new aFe lowering spring in the exact configuration and quantity identified by this listing. Hardware, clamps, couplers, gaskets, sensors, wiring, fluids, calibration, and accessories are included only when expressly stated.

About aFe Power

aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.

Important Disclosures

  • California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

Frequently Asked Questions

Will the Control Lowering Springs 08-13 BMW M3 (E90/92) fit my suspension configuration (aFe 410-503006-N)?
Match drivetrain, trim, factory suspension, ride height, wheel and tire package, and any exclusions shown for this exact product.

Will an alignment be required?
An alignment is recommended whenever ride height or suspension geometry changes and may also be needed after replacing bars, arms, links, or mounts.

Does the kit change ride quality?
Ride and handling depend on rates, adjustment, bushings, tire setup, and installation. Use the settings recommended for the intended street or off-road use.

Should fasteners be rechecked after installation?
Yes. Torque fasteners at the specified suspension position, inspect clearance, and recheck hardware after the initial driving cycle.

Installation Instructions

  1. Confirm aFe part number 410-503006-N, the complete vehicle or specification-based application, and all required supporting components.
  2. Support the vehicle at approved points, record ride height and alignment condition, and compare every mount and component before disassembly.
  3. Install hardware in the documented orientation and torque sequence, tightening pivot bushings at the specified ride position where required.
  4. Verify full steering and suspension travel, wheel and tire clearance, alignment, and fastener torque before normal driving.

Request For Information

Have questions about aFe Control Lowering Springs 08-13 BMW M3 (E90/92)? Fill out the form below and we'll get back to you by the next business day.
aFe

aFe

aFe Power performance parts cover the complete airflow path and supporting vehicle systems, including cold air intakes, replacement filters, exhaust systems, intercoolers, charge pipes, tuning modules, suspension components, differential covers, transmission pans, and truck accessories. Shop by exact manufacturer part number and verify the complete vehicle, engine, drivetrain, emissions classification, dimensions, and included hardware before ordering. Cold Air Intakes and Filters Choose an aFe intake by exact vehicle and engine application, then compare tube design, sensor provisions, housing configuration, emissions status, and filter media. Pro DRY S dry media emphasizes simple maintenance without filter oil, while oiled media options use their own documented cleaning and service procedures. Replacement and universal filters must be matched by every flange, panel, seal, height, and flow-direction dimension. Exhaust and Emissions Fitment Cat-back, axle-back, DPF-back, header, down...

View aFe Products
BMW M Series Models Parts & Accessories

BMW M Series Models Parts & Accessories

BMW M Series parts and accessories for M2, M3, M4, M5, and M8 models are stocked at Black Ops Auto Works. Shop cat-back and slip-on exhaust systems, carbon fiber tail pipes, headlight and taillight upgrades, carbon fiber hoods and grilles, intake valves, engine components, water pumps, and interior accessories for E46, E90, E92, F80, F82, F90, G80, G82, G87, and G90 chassis codes. Every product is filterable by year, make, model, chassis code, and trim so the correct part ships the first time. Black Ops Auto Works carries 1,328 BMW M Series SKUs across exhaust, lighting, engine, exterior, and interior categories. What This Collection Covers BMW M Series models span multiple chassis generations with different engine platforms, from the naturally aspirated S54 and S65 engines to the twin-turbo S55 and S58 engines found in current M3 and M4 models. This collection groups parts confirmed to fit the specific M chassis code and engine so E46 M3 owners, F80/F82 owners, and G80/G82 S58 ...

View BMW M Series Models Parts & Accessories Products
Lowering Springs

Lowering Springs

Shop lowering springs from Eibach, H&R, Swift Springs, RS-R, UMI Performance, MaxTrac, aFe Control, Ford Racing, Whiteline, Vogtland, ST Suspensions, Belltech, Skyjacker, and Black Ops Auto Works. Find sport lowering springs, Pro-Kit springs, Sportline springs, Spec-R springs, Super Sport springs, Race springs, Down Sus springs, adjustable lowering springs, SUV lowering springs, truck lowering springs, and EV lowering springs for street cars, muscle cars, sport compacts, European performance platforms, SUVs, trucks, and modern EV builds. Lowering springs are the simplest way to drop a vehicle’s ride height. They keep the OE shocks, upper mounts, and suspension geometry components in place and swap only the coil springs for shorter, progressively- or linearly-wound performance springs. Shop by vehicle year, make, model, trim, drop height, spring type (progressive vs linear), and application (street, show, mild-handling, SUV, EV, truck). Lowering springs are the correct choice...

View Lowering Springs Products
Suspension

Suspension

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...

View Suspension Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×