The aFe 49-46006-P cat-back uses 3-inch mandrel-bent 409 stainless tubing and a dual-inlet, center-out stainless muffler, ending in one polished bolt-on 304 stainless tip. The exact selected application and guide identify 2007-2009 Tundra gas V8-5.7L. A 145.7-inch wheelbase is required.
The exact manufacturer and selected guide require 145.7-inch wheelbase. No longer-wheelbase, other engine, later-generation or related Sequoia application is inferred. All three original named groups and year bounds already match and remain unchanged.
| Years | Make | Model | Submodel |
|---|---|---|---|
| 2007-2009 | Toyota | Tundra | Base |
| 2007-2009 | Toyota | Tundra | Limited |
| 2007-2009 | Toyota | Tundra | SR5 |
| Detail | Value |
|---|---|
| Manufacturer Part Number | 49-46006-P |
| Product type | Catback |
| Construction | 3-inch mandrel-bent 409 stainless with a dual-inlet/center-out stainless muffler. No unprinted welding process or tip outlet dimensions are inferred. |
| Selected packing list | one mid-pipe #1 05-44686 and one mid-pipe #2 05-44687, one dual-inlet/center-out muffler 05-44330, one one-piece over-axle/tailpipe 05-44213, three 3-inch bands 05-41055 and one selected polished 304 stainless tip 49T30451-P12. The alternative finish and replacement-tip illustrations do not add extra included tips. |
| Application limits | The exact manufacturer and selected guide require 145.7-inch wheelbase. No longer-wheelbase, other engine, later-generation or related Sequoia application is inferred. |
| Front seals | Retain original converter-flange bolts and rubber isolation mounts. No new front gaskets or gasket reuse/replacement instruction are printed in the selected bill and procedure; confirm correct front sealing service before disassembly. |
| Guide qualification | Step 5 mentions an over-axle pipe and an over-axle/tailpipe, while the selected diagram identifies one one-piece over-axle/tailpipe 05-44213. No additional separate over-axle section is added to the bill; confirm actual packing if the parts differ. |
| Tightening and recheck | No numeric torque is printed. Tighten bands from front to rear after complete alignment. Maintain the guide's tailpipe-to-body spacing of at least 1/2 to 1 inch and retighten all exhaust components after 50-100 miles. |
| Power and flow claims | The exact older-system headline states +13 hp/+31 lb-ft, while Details states +13 hp/+21 lb-ft. That torque-claim conflict remains unresolved. The primary also claims 57% greater flow, but links no selected dyno/flow chart establishing conditions or point/peak values; no figure is silently chosen or borrowed from the later system. |
| Replacement tip | The replacement-tip figure offers alternatives rather than extra included tips. Confirm exact replacement identity and inlet before ordering; no interchangeability is inferred solely from the figure. |
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
It is a muffler-equipped 3-inch 409 stainless cat-back with one polished 304 stainless tip for the selected 2007-2009 Tundra 5.7L application.
Which wheelbase and cab limits apply?The exact manufacturer and selected guide require 145.7-inch wheelbase. No longer-wheelbase, other engine, later-generation or related Sequoia application is inferred.
What parts are included?one mid-pipe #1 05-44686 and one mid-pipe #2 05-44687, one dual-inlet/center-out muffler 05-44330, one one-piece over-axle/tailpipe 05-44213, three 3-inch bands 05-41055 and one selected polished 304 stainless tip 49T30451-P12. The alternative finish and replacement-tip illustrations do not add extra included tips.
Which original parts are reused?Retain original converter-flange bolts and rubber isolation mounts. No new front gaskets or gasket reuse/replacement instruction are printed in the selected bill and procedure; confirm correct front sealing service before disassembly.
What guide or packing detail needs clarification?Step 5 mentions an over-axle pipe and an over-axle/tailpipe, while the selected diagram identifies one one-piece over-axle/tailpipe 05-44213. No additional separate over-axle section is added to the bill; confirm actual packing if the parts differ. The replacement-tip figure offers alternatives rather than extra included tips. Confirm exact replacement identity and inlet before ordering; no interchangeability is inferred solely from the figure.
What tightening and mileage check apply?No numeric torque is printed. Align the complete system and tighten bands front to rear. Maintain the guide's tailpipe-to-body spacing of at least 1/2 to 1 inch and retighten all exhaust components after 50-100 miles.
Are the power and flow figures established for every truck?The exact older-system headline states +13 hp/+31 lb-ft, while Details states +13 hp/+21 lb-ft. That torque-claim conflict remains unresolved. The primary also claims 57% greater flow, but links no selected dyno/flow chart establishing conditions or point/peak values; no figure is silently chosen or borrowed from the later system.
Do the named years cover every trim and generation?No. Match Base, Limited and SR5 2007-2009 with the exact 5.7L engine and 145.7-inch wheelbase. No later generation or other engine is inferred.
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Shop aFe POWER intake systems, replacement filters, exhaust components, BladeRunner cooling parts and CONTROL chassis accessories at Black Ops Auto Works. Compare Momentum GT, Track Series and Magnum FORCE intake applications alongside Pro DRY S and Pro 5R filter choices. Choose a complete upgrade or a service component for the system already on your car, truck or SUV.Choose Your aFe Intake and FilterMomentum GT, Track Series and Magnum FORCECompare the intake housing, tubing, filter arrangement and finish offered for your engine. The collection includes Momentum GT applications, selected carbon-fiber Track Series systems and Magnum FORCE configurations. Each package supplies its own combination of induction components, so choose the design for the installation you want.Pro DRY S or Pro 5R Filter MediaPro DRY S uses oil-free media and skips the re-oiling step during service. Pro 5R is an oiled filter option with a different maintenance procedure. Choose a media configuration aFe off...
View aFe Products
Shop cat-back exhaust systems for a more distinctive voice and a coordinated rear-end finish at Black Ops Auto Works. Compare Borla S-Type and ATAK, CORSA Sport and Xtreme, AWE Touring and Track, MBRP and other listed systems for the exact vehicle. Choose the sound character you want at acceleration and cruise, then compare material, valve operation, exit layout and tips.Borla and CORSA Sound ChoicesBorla S-Type and ATAK provide different sound characters, with ATAK the more aggressive option where both are offered. Compare manufacturer sound clips on the same engine and vehicle, including the installed headers or other front-exhaust changes that affect the finished note.CORSA Sport and Xtreme likewise have different sound levels. Its RSC technology targets unwanted cruising resonance in the designed system. Choose the actual application and sound family rather than assuming the loudest acceleration note must also mean the most cabin drone.AWE Touring, Track and Other Product Famili...
View Catback Products
Shop performance exhaust systems, cat-backs, axle-backs, headers, mufflers, and exhaust tips at Black Ops Auto Works. Compare options from Borla, CORSA, Solo Performance, AWE, MagnaFlow, MBRP, Kooks, Akrapovic, Invidia, and other brands. Find complete systems and individual components for muscle cars, performance SUVs, trucks, imports, and European vehicles. Cat-Back and Axle-Back Exhaust Systems Choose the exhaust section that matches your project. Cat-back systems generally replace the exhaust downstream of the catalytic converter, while axle-back systems replace the rear section. Exact connection points and package contents vary by vehicle. Compare muffler design, pipe diameter, exit location, tip configuration, and compatibility with existing exhaust components. Exhaust for HEMI, SRT, Trackhawk, and Hellcat Vehicles This collection includes exhaust options for selected Jeep Grand Cherokee SRT and Trackhawk, Dodge Durango SRT and Hellcat, Dodge Charger, Chrysler 300, and Ram appl...
View Exhaust Systems Products
Shop Toyota Tundra parts for suspension projects, brake maintenance, bed equipment and exterior accessories at Black Ops Auto Works. Compare Bilstein, ICON or OME choices, cab-specific steps and BAK bed covers. Start with your actual generation, powertrain, drivetrain, cab and bed to coordinate the complete order.Dampers, Springs and Suspension SystemsCompare Bilstein, KYB, ICON and OME suspension choices by exact generation, service position and factory configuration. Match actual drivetrain, factory suspension and current ride height before comparing an individual damper, loaded strut or complete system. A lift title stating no shocks needs the separate supported damper plan reviewed.Bed Caps, Covers and Cab AccessoriesFor Westin truck caps supplied as Box 1, include the specified companion Box 2 in the complete installation plan. BAK covers, running boards and ventvisors also distinguish bed or cab configurations. Review exact body, rail-system and supplied installation component...
View Toyota Tundra Parts and Accessories Products
