aFe 54-13020C is the black ABS magnetic cover for the specified aFe Rapid Induction/Magnum FORCE intake housings on Ram 1500 DT applications. It is a cover accessory for an already installed compatible aFe intake, not a complete intake or a factory-airbox replacement lid. Remove the intake trim seal before fitting the cover with its magnets inside the sheet-metal housing and its longer edges outside.
Select by the actual installed aFe intake and housing interface, not vehicle year or engine alone. The current exact cover page lists the four compatible intake kit numbers below. Its one-page manual names Ram 1500 DT 2019-2021 V6/V8, while current parent-intake headlines extend later; those later parent years do not independently prove every cover/boxed-housing revision. Existing empty fitment tags, universal=false metadata and native Ram membership are retained. No mass vehicle mapping, Classic coverage or other aFe housing compatibility is inferred.
| Installed intake kit | System family | Required interface |
|---|---|---|
| 54-13020R | Rapid Induction/Magnum FORCE | Actual matching sheet-metal housing |
| 54-13020D | Rapid Induction/Magnum FORCE | Actual matching sheet-metal housing |
| 52-10002R | Rapid Induction/Magnum FORCE | Actual matching sheet-metal housing |
| 52-10002D | Rapid Induction/Magnum FORCE | Actual matching sheet-metal housing |
Verify 54-13020C against the actual installed intake kit, magnetic interface and housing revision and applicable emissions requirements before ordering.
| Brand | aFe POWER |
| Manufacturer Part Number | 54-13020C |
| Product | Magnetic intake-system cover accessory |
| Color/material | Black injection-molded ABS |
| Quantity | One cover |
| Attachment | Manufacturer describes rare-earth magnets; no new securing hardware needed |
| Housing interface | Specified aFe black powder-coated sheet-metal intake housing; manufacturer describes 18-gauge steel |
| Seal handling | Remove the installed intake trim seal before fitting |
| Orientation | Magnets inside the sheet-metal housing; longer cover edges outside |
| Emissions | Current manufacturer states no EO required for this accessory; underlying intake has its own exact requirements |
| Recheck | Check screws, clamps and connectors after 100-200 miles; no numeric torque supplied |
| Quantity | Manufacturer service part | Component |
|---|---|---|
| 1 | No separate service number itemized | Black Rapid Induction magnetic cover |
Only one cover appears in the exact bill. No replacement filter, coupler, intake tube, complete housing, sensor, wiring or new securing screws are itemized. Generic manufacturer filter/coupler-included flags conflict with this one-item accessory bill and do not establish additional contents. The original intake and its service components remain separate.
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
One black ABS magnetic intake cover. It is an accessory for a compatible installed aFe intake, not a complete intake kit.
Which intake housings are listed as compatible?Current manufacturer support names kits 54-13020R, 54-13020D, 52-10002R and 52-10002D. Verify the actual installed kit and sheet-metal housing interface.
Does a Ram 1500 year match alone prove fit?No. This cover fits the named aFe intake housings. It does not establish factory-airbox, Classic or every later boxed-revision compatibility from vehicle year alone.
Must the trim seal remain installed?The exact manual directs removal of the installed intake trim seal before the cover is fitted.
How should the magnetic cover be oriented?Keep the magnets inside the sheet-metal housing and the longer cover edges outside. Verify that the cover sits securely.
Are new filters, couplers or screws supplied?No such parts appear in the single-item bill. Generic filter/coupler-included flags do not add those items to this cover accessory.
Does the no-EO accessory statement certify my whole intake?No. The manufacturer states this cover does not require an EO, while the underlying intake retains its own model-year and engine-test-group restrictions.
What measured gains and recheck instructions are supplied?No separate sound, temperature, flow or dyno test quantifies this cover alone. Check screws, clamps and connectors after 100-200 miles; no numeric torque is given.
Verify aFe 54-13020C. Read the complete one-page manual and allow the vehicle to cool. Remove the trim seal from the compatible installed aFe intake. Seat the cover with the magnets on the inside of the sheet-metal housing and the longer cover edges on the outside. Check secure fit and inspect all screws, clamps and connectors after 100-200 miles as the manual directs. The exact procedure specifies no battery disconnection, drilling, cutting, sensor transfer, additional screws or numeric torque.
The exact current manufacturer page and complete one-page illustrated manual were reviewed, including the single-item bill and cover orientation. Current Rapid Induction and older Magnum FORCE names refer to the specified intake interfaces; compatibility is controlled by the installed kit and housing. Parent-intake flow/dyno claims are not standalone cover test results. Manufacturer qualitative noise/temperature statements do not establish a guaranteed measured reduction or power increase. Accessory no-EO wording does not certify a later or otherwise excluded parent-intake application. Turn14 exact-product information remains unavailable without authenticated access. Original native memberships and protected commercial data are preserved; price is unchanged.
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
| Years | Make | Model | Required configuration |
|---|---|---|---|
| 2019-2021 | Ram | 1500 | Chassis: DT. V6/V8. Cover accessory for installed aFe intake kits 54-13020R, 54-13020D, 52-10002R or 52-10002D only. Match the sheet-metal housing and magnetic cover interface. Not a universal or Classic/DS application. Remove the intake trim seal; install with magnets inside the housing and longer edges outside, following aFe instructions. |
Shop aFe POWER intake systems, replacement filters, exhaust components, BladeRunner cooling parts and CONTROL chassis accessories at Black Ops Auto Works. Compare Momentum GT, Track Series and Magnum FORCE intake applications alongside Pro DRY S and Pro 5R filter choices. Choose a complete upgrade or a service component for the system already on your car, truck or SUV.Choose Your aFe Intake and FilterMomentum GT, Track Series and Magnum FORCECompare the intake housing, tubing, filter arrangement and finish offered for your engine. The collection includes Momentum GT applications, selected carbon-fiber Track Series systems and Magnum FORCE configurations. Each package supplies its own combination of induction components, so choose the design for the installation you want.Pro DRY S or Pro 5R Filter MediaPro DRY S uses oil-free media and skips the re-oiling step during service. Pro 5R is an oiled filter option with a different maintenance procedure. Choose a media configuration aFe off...
View aFe Products
Complete or service an intake project with hoses, couplers, sensor fittings, adapters and system-specific hardware from Black Ops Auto Works. Compare aFe, COBB, Mishimoto, K&N, APR and other listed components for the section of the intake you are changing. A targeted component can be the right purchase when the rest of the existing system is staying in place.Induction Hoses, Couplers and AdaptersChoose an induction hose for a defined section of the airflow path, such as a vehicle-specific Mishimoto hose or a COBB intake-tube reference. Compare straight or reducing connections, bends, mounting clearance and the existing tube dimensions before selecting a replacement.K&N adapters and application-specific clamp/coupling kits help connect the correct filter or intake sections. Match the component to the manufacturer’s intended location and operating requirements. Pre-turbo induction plumbing and a pressurized charge-air connection can require different parts.Sensor Fittings and ...
View Air Intake Components Products
Shop performance air intake systems for your next engine-bay upgrade at Black Ops Auto Works. Compare complete cold-air intakes, short-ram layouts and enclosed systems from Legmaker, JLT, aFe, K&N, Injen and other listed manufacturers. Choose the intake character, packaging and filter-service approach that suit the vehicle and the way you use it.Complete Intakes or a Focused Component UpgradeA complete intake is the place to start when changing the filter, tubing and enclosure as a matched package. An individual airbox, intake tube, coupler or replacement filter can be a better purchase when the rest of the installed system is staying. Compare what the package supplies before choosing between the two routes.For a naturally aspirated, turbocharged or supercharged engine, the connection and sensor arrangement are part of the design. Choose the complete system for that application rather than combining a large tube and filter solely by appearance.Cold-Air, Short-Ram and Enclosed De...
View Air Intake Systems Products
Shop Dodge Ram 1500 and Ram 1500 parts and accessories across model years at Black Ops Auto Works. Select your truck’s year, engine and body generation to find the correct application. Explore badges and carbon fiber trim, billet engine-bay details, catch cans and intake options alongside bed accessories. Choose the parts for your exact body, engine and trim, with Classic, TRX and RHO applications reviewed separately.Badges, Carbon Fiber and Cabin DetailsCompare grille and tailgate badges, mirror caps, console trim and switch-bezel covers to create the look you want. The collection includes TRX-specific emblems and selected references naming TRX or RHO. Match the mounting location and exact body or interior application before choosing color, finish and supplied pieces.Catch Cans, Intakes and Engine-Bay AccessoriesExplore MightyMouse Mild and Wild TRX catch-can references alongside Billet Technology systems for specified engines. Intake choices such as the listed aFe Momentum GT TRX ...
View Ram 1500 Parts and Accessories Products
