aFe MagnumFLOW OEM Replacement Air Filter Pro DRY S 12-14 Mercedes-Benz C/E/ML-Class V6 3.5L

Shop aFe Power cold air intakes, air filters, exhaust systems, intercoolers, charge pipes, tuning modules, suspension parts, drivetrain components, and truck accessories. Match every part by exact aFe manufacturer number and verify the complete vehicle, engine, drivetrain, emissions classification, dimensions, and included hardware before ordering. Cold Air Intakes and Performance Filters Choose an aFe intake by exact vehicle and engine application, then compare tube design, sensor provisions, housing configuration, emissions status, and filter media. Pro DRY S dry media is serviced without filter oil, while oiled media options follow their own cleaning and re-oiling procedures. Replacement and universal filters must be matched by flange size, panel dimensions, seal design, height, and airflow direction. aFe Power Exhaust Systems and Emissions Fitment Cat-back, axle-back, DPF-back, header, downpipe, mid-pipe, and related exhaust parts can vary by body style, cab and bed, wheelbase...

Performance Air Filters and Replacement Filters This collection covers filtration for factory air boxes, aftermarket intake systems, custom intake tubing, crankcase ventilation and vehicle HVAC systems. Start with the installation type, then confirm the exact manufacturer part number, filter media, dimensions and application shown on the product page. Similar-looking filters are not automatically interchangeable. Choose the Correct Air Filter Type Direct-fit and drop-in filters: shaped for a specific factory air box or listed intake system. Universal clamp-on filters: selected by flange inside diameter, base and top dimensions, height and available clearance. Cabin and HVAC filters: vehicle-specific filters for air entering the passenger compartment. Breather filters: compact filters for compatible valve-cover, crankcase-vent and catch-can applications. Pre-filters and wraps: outer covers designed for compatible primary filters in dusty, sandy or wet environments. Velocity...

Drop in air filters and replacement panel filters for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop reusable and dry media panel filters that fit directly into your factory air box from K&N, aFe, AEM, Injen, BMC, and GReddy for vehicles ranging from Corvette and Mustang to Porsche, BMW, and Ford Super Duty diesel trucks. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct filter ships the first time. Black Ops Auto Works carries 1,453 drop in air filter SKUs across dozens of vehicle platforms. What This Category Covers Drop in air filters replace the factory paper filter element inside your existing air box without changing the intake tubing or housing. This collection spans reusable oiled cotton filters, dry synthetic media filters, and OEM style replacement panels sized to fit factory air box dimensions across nearly every make and model. Reusable and Dry Media Options Reusable oiled cotton filters from K&...

Choose Mercedes-Benz C300 brake and suspension-service components by generation, body and drivetrain. Sedan, coupe and convertible rear-pad references should be checked independently. Body-Specific Rear Brakes Identify fitted rear calipers and backing shape, then match the exact sedan or coupe/convertible application. A shared C300 name does not establish one rear-pad package. For pad-and-rotor kits, compare axle coverage, rotor diameter, thickness, offset and mounting. Review sensors, clips and complete supplied contents. Suspension Mounts and Electronic Fit For a rear strut mount, compare the mounting pattern, service position and installed suspension. Match the exact chassis and production application, including any equipment restrictions, using the manufacturer part number. Pedal-control accessories require their own supported chassis, connector and harness. Match current drivetrain and electronic modifications independently of brake or mount coverage. Choose Your Part Identify...

Compare Mercedes-Benz C350 brake and suspension-service components using exact generation, body and drivetrain. Mounts, protective boots and complete dampers serve different repair needs. Suspension Position and Equipment For front dampers, verify drivetrain coverage and respect stated 4Matic exclusions. Compare mounting, travel and exact production application. For rear mounts, identify mounting pattern and installed suspension separately. A boot, bump stop or mount package does not necessarily supply a complete damper assembly. Brake Kits and Electronic Fit Match pad shape, caliper and rotor geometry at each axle before comparing compound. Confirm whether the kit supplies pairs, hardware or sensors. Pedal accessories require exact supported chassis, connector and harness. Include existing electronic changes when requesting application help. Choose Your Part Identify generation, body and drivetrain. Match front damper and rear-mount applications. Review protective versus complete ...

Choose Mercedes-Benz E350 rear brake kits by exact generation, installed calipers and intended use. Compare kit contents before adding separate sensors, rotors or hardware. Rear Brake Kit Selection Visible EBC S1, S12 and S13 references require exact axle and vehicle confirmation. Compare the specified compound, compatible rotor and manufacturer use guidance for each proposed kit. A shared E/CLS reference does not establish every E350 brake package. Identify backing shape, rotor material and dimensions from the installed assembly. Complete Service Requirements Check whether a kit includes pads, rotors, sensors and installation hardware. Match sensor connectors, routing and service position rather than relying on length alone. For front rotors, protective boots or electronic pedal accessories, verify their applications independently. A rear-brake match does not establish those separate interfaces. Choose Your Part Identify generation and rear caliper package. Compare exact kit compo...

Compare Mercedes-Benz E400 rear brake friction and rotor kits using exact production and brake equipment. Choose the operating characteristics only after physical application is established. Rear Pad Application and Use A visible Hawk HPS 5.0 reference names a 2018 E400 rear application. Confirm exact caliper and pad specification before extending that reference to another model year or configuration. Compare intended driving use, compatible rotor material and preparation instructions. Another AMG or E-Class application is not a substitute for exact E400 support. Kits, Sensors and Separate Interfaces For EBC S1, S12 and S13 references, review exact axle, friction specification and rotor contents. Match rotor dimensions and mounting independently. Identify wear leads and hardware separately. Pedal-control accessories require their own supported chassis, connector and harness even when a brake application has been confirmed. Choose Your Part Identify production and fitted rear calipe...

Compare Mercedes-Benz GLE350 floor liners and front rotors by generation and installed equipment. Later interior and brake applications should not be extended to an earlier body. Passenger Rows and Cargo Protection The Husky WeatherBeater reference identifies 2020–2023 GLE350/GLE450 front and second-seat floor liners. Confirm the exact part number and vehicle application. Compare full front/second-row packages with second-row-only pieces. Cargo protection is separate unless included; match driving side and seating configuration. Front Rotor Selection The DFC front drilled hi-carbon Geomet reference identifies 2020–2023 GLE350 applications. Match exact brake package, diameter, thickness, overall height and mounting. Confirm pads, wear leads and hardware separately. Another GLS or GLE variant’s rotor requires explicit support for the fitted GLE350 brakes. Choose Your Part Identify generation and exact production. Confirm supplied liner rows and separate cargo contents. Match front ro...

Choose Mercedes-Benz GLK350 wheel-spacing, suspension-service and transmission-fluid parts by exact chassis and installed equipment. Similar C-Class interfaces need specific GLK support. DR/DRA Spacers and Wheel Locks Confirm the specified DR or DRA fastening method, exact thread, seat shape and required bolt engagement. Compare pattern, bore and centering with current wheels. Measure clearance using wheel width, offset, tire size and suspension changes. A wheel lock must match effective length and seat geometry; 12x1.5 and 14x1.5 threads are not substitutes. Rear Mounts, Brakes and ATF For rear strut mounts, compare mounting pattern, service position and supported suspension equipment. A C300 reference needs explicit GLK350 application support. Confirm rear-rotor geometry independently. Identify exact gearbox and required fluid specification before selecting ATF; review all service contents separately. Choose Your Part Identify chassis and current wheel/suspension equipment. Confi...

Compare Mercedes-Benz ML350 floor protection and rear friction by generation and production. An earlier liner or pad application should not be extended to every ML350 body. Passenger and Cargo Liners The WeatherBeater references identify ML350 passenger-floor coverage and a separate cargo liner behind the second seat. Confirm exact production and interior application. Compare included passenger rows, driving side and cargo-floor position. Follow retention and care instructions, with unobstructed pedal movement after fitting. Rear Pads and Complete Brake Service The Hawk HPS 5.0 rear-pad reference identifies 2012–2015 ML350/550 applications. Match exact manufacturer number, fitted caliper and rotor material. Check front components separately and review wear leads, clips and hardware contents. Related GLE or GL references require explicit ML350 support. Choose Your Part Identify generation and exact production. Confirm passenger rows and separate cargo coverage. Match rear caliper, p...

Choose Mercedes-Benz R350 brake and wheel-spacing parts using exact powertrain, production and installed assemblies. Confirm each mechanical interface independently. Friction Kits and Rotor Dimensions Match front/rear calipers, pad backing shapes and rotor material before choosing compound. Related G55, G63 or CL63 coverage needs exact R350 support. Compare rotor diameter, thickness, height and mounting. For S5 kits, confirm the required axle, supplied quantity and compatible operating use. DRA Fasteners and Service Hardware For DRA spacers, follow the specified hub-fastening instructions and confirm wheel-bolt thread, seat and engagement. Compare pattern, bore and centering. Measure clearance with current wheels, tires and suspension. Match wear-lead connectors, routing and service position separately from spacer hardware. Choose Your Part Identify exact R350 powertrain and production. Match actual brake package and kit contents. Confirm DRA fasteners and wheel centering. Measure ...

Choose Mercedes-Benz SLK350 friction and rotor kits by exact generation and fitted calipers. Shared C-Class or CLA references need specific SLK support. Front and Rear Brake Matching Identify backing shape and rotor material independently at each axle. Compare complete rotor dimensions and mounting before selecting a kit. For S5 Yellowstuff/GD references, confirm exact production, axle and supplied pads/rotors. Another model’s compound label does not establish physical fit. Operating Use and Electronic Interfaces Review intended compound use, compatible rotor material and manufacturer bedding instructions. Match wear leads, clips and installation hardware separately. Pedal-control accessories require exact generation, connector and harness support. Include electronic modifications and any brake conversions when requesting application help. Choose Your Part Identify generation and actual brake assemblies. Match pad shape and complete rotor geometry. Review kit axle, intended use and...