-20%
Sold out
Click to zoom in
Toyota Tacoma Momentum GT intake and scoop
aFe 54-76005-S This black rotomolded LLDPE scoop feeds the auxiliary opening of the specified Momentum GT airbox through a silicone hump coupling. It is a separate air-directing accessory that reuses original radiator-panel push clips.
Key Features
- One black LLDPE scoop and one silicone hump coupling.
- Requires the specified Momentum GT housing; does not fit the OE airbox.
- Reuses three original push clips; no new clip set or filter listed.
- Passenger-side-first installation with coupling ribs toward the airbox.
- No cutting or drilling specified by the exact manufacturer listing.
Fitment
Toyota Tacoma V6-3.5L with the required Momentum GT housing. The standalone manufacturer page explicitly names parent intake 54-76005 and excludes the OE airbox. Its exact manual covers 2016-2022, while the exact-part named-trim retailer table and existing rows stop at 2021; later named-trim years are not added from another kit. The dry parent page also lists this optional accessory, but the standalone page has narrower parent wording: confirm exact housing before ordering. The red complete kit includes its own red scoop; this is not another complete intake.
| Years | Make | Model | Named trim; actual engine and hood requirements apply |
|---|---|---|---|
| 2016-2021 | Toyota | Tacoma | Limited |
| 2016-2021 | Toyota | Tacoma | SR |
| 2016-2021 | Toyota | Tacoma | SR5 |
| 2016-2021 | Toyota | Tacoma | TRD Off-Road |
| 2016-2021 | Toyota | Tacoma | TRD Sport |
| 2017-2021 | Toyota | Tacoma | TRD Pro |
| 2021 | Toyota | Tacoma | Trail |
Verify 54-76005-S against the actual engine, sensor and vent connections, mounting locations and applicable emissions requirements before ordering.
Specifications
| Brand | aFe POWER |
| Manufacturer Part Number | 54-76005-S |
| Application | Toyota Tacoma V6-3.5L with the required Momentum GT housing. The standalone manufacturer page explicitly names parent intake 54-76005 and excludes the OE airbox. Its exact manual covers 2016-2022, while the exact-part named-trim retailer table and existing rows stop at 2021; later named-trim years are not added from another kit. The dry parent page also lists this optional accessory, but the standalone page has narrower parent wording: confirm exact housing before ordering. The red complete kit includes its own red scoop; this is not another complete intake. |
| Scoop material | Rotomolded LLDPE |
| Supplied parts | 05-76005B3 scoop / 05-01401 silicone hump coupling |
| Fasteners | Reuse three original push clips; seven removed during preparation |
| Filter / full intake | Neither listed in exact BOM; generic Filter Included Yes not supported |
| Recheck / torque | 200 miles / no numeric torque supplied |
| Emissions | The exact current manufacturer pages and manuals state that this product is not currently CARB exempt and is unavailable for purchase in California or use on a vehicle registered with the California DMV. |
What's Included
| Quantity | Manufacturer service part | Component |
|---|---|---|
| 1 | 05-76005B3 | Black rotomolded LLDPE scoop |
| 1 | 05-01401 | Silicone hump coupling |
One black 05-76005B3 rotomolded LLDPE scoop and one 05-01401 silicone hump coupling are listed. Reuse THREE original push clips from the SEVEN removed from the radiator support panel. No filter, MAF, intake tube or new clip set is listed, despite the generic page field claiming Filter Included Yes. It does not fit the original Toyota airbox.
About aFe Power
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
Related Parts
- Manufacturer product specifications for 54-76005-S
- Exact illustrated installation manual
- Shop the complete aFe Power collection
Frequently Asked Questions
Which intake housing is required for 54-76005-S?Toyota Tacoma V6-3.5L with the required Momentum GT housing. The standalone manufacturer page explicitly names parent intake 54-76005 and excludes the OE airbox. Its exact manual covers 2016-2022, while the exact-part named-trim retailer table and existing rows stop at 2021; later named-trim years are not added from another kit. The dry parent page also lists this optional accessory, but the standalone page has narrower parent wording: confirm exact housing before ordering. The red complete kit includes its own red scoop; this is not another complete intake.
Is a filter or complete intake included?One black 05-76005B3 rotomolded LLDPE scoop and one 05-01401 silicone hump coupling are listed. Reuse THREE original push clips from the SEVEN removed from the radiator support panel. No filter, MAF, intake tube or new clip set is listed, despite the generic page field claiming Filter Included Yes. It does not fit the original Toyota airbox.
What is the scoop made from?The current exact manufacturer overview specifies impact-resistant LLDPE. It is a molded plastic air-directing accessory, not carbon fiber or a filter housing.
Which clips and support panel are involved?Remove the seven original radiator-support-panel push clips carefully and retain three. The scoop occupies the illustrated panel location using the center clip first, followed by the two outer clips. No cutting or drilling is specified.
Which way does the coupling install?Place its internal ribs over the airbox, lower the scoop passenger side first and seat the coupling fully around both connected components.
Does the standalone scoop establish an independent horsepower gain?No exact standalone dyno or flow chart is linked on this page. Complete-intake test results are not a separate scoop-only gain.
Does this establish water-fording capability?No sealed snorkel or water-fording depth is certified by the exact page or manual. Avoid drawing water into the engine.
What recheck and emissions restrictions apply?Recheck connections after 200 miles. The manual provides no numeric torque. The exact current manufacturer pages and manuals state that this product is not currently CARB exempt and is unavailable for purchase in California or use on a vehicle registered with the California DMV.
Installation Instructions
Verify aFe 54-76005-S. Remove all SEVEN radiator-support-panel push clips carefully by releasing their center pins, retaining THREE for reuse, then lift off the original plastic support panel. Press the black plastic clip side tabs and push the clip through the metal support. Slide the supplied hump coupling onto the intake airbox with its INTERNAL RIBS toward the airbox. Lower the scoop PASSENGER SIDE FIRST over the original clip locations while inserting its inlet end into the coupling. Install the center slotted-hole push clip first, then the two remaining clips. Confirm that the coupling seats fully around BOTH the airbox and scoop. The scoop replaces the removed panel in the illustrated arrangement. Recheck connections after 200 miles; no numeric torque is specified.
Important Disclosures
Toyota Tacoma V6-3.5L with the required Momentum GT housing. The standalone manufacturer page explicitly names parent intake 54-76005 and excludes the OE airbox. Its exact manual covers 2016-2022, while the exact-part named-trim retailer table and existing rows stop at 2021; later named-trim years are not added from another kit. The dry parent page also lists this optional accessory, but the standalone page has narrower parent wording: confirm exact housing before ordering. The red complete kit includes its own red scoop; this is not another complete intake. The exact current manufacturer pages and manuals state that this product is not currently CARB exempt and is unavailable for purchase in California or use on a vehicle registered with the California DMV.
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
aFe
Shop aFe POWER intake systems, replacement filters, exhaust components, BladeRunner cooling parts and CONTROL chassis accessories at Black Ops Auto Works. Compare Momentum GT, Track Series and Magnum FORCE intake applications alongside Pro DRY S and Pro 5R filter choices. Choose a complete upgrade or a service component for the system already on your car, truck or SUV.Choose Your aFe Intake and FilterMomentum GT, Track Series and Magnum FORCECompare the intake housing, tubing, filter arrangement and finish offered for your engine. The collection includes Momentum GT applications, selected carbon-fiber Track Series systems and Magnum FORCE configurations. Each package supplies its own combination of induction components, so choose the design for the installation you want.Pro DRY S or Pro 5R Filter MediaPro DRY S uses oil-free media and skips the re-oiling step during service. Pro 5R is an oiled filter option with a different maintenance procedure. Choose a media configuration aFe off...
View aFe Products
Air Intake Systems
Shop performance air intake systems for your next engine-bay upgrade at Black Ops Auto Works. Compare complete cold-air intakes, short-ram layouts and enclosed systems from Legmaker, JLT, aFe, K&N, Injen and other listed manufacturers. Choose the intake character, packaging and filter-service approach that suit the vehicle and the way you use it.Complete Intakes or a Focused Component UpgradeA complete intake is the place to start when changing the filter, tubing and enclosure as a matched package. An individual airbox, intake tube, coupler or replacement filter can be a better purchase when the rest of the installed system is staying. Compare what the package supplies before choosing between the two routes.For a naturally aspirated, turbocharged or supercharged engine, the connection and sensor arrangement are part of the design. Choose the complete system for that application rather than combining a large tube and filter solely by appearance.Cold-Air, Short-Ram and Enclosed De...
View Air Intake Systems Products
Scoops & Snorkels
Shop elevated intake snorkels, air scoops and ducting at Black Ops Auto Works. Compare ARB Safari, K&N elevated intakes and aFe D.A.S. snorkels for supported off-road applications, plus aFe dynamic scoops, HKS ducts/boxes and the Black Ops Huracan STO roof-scoop inlet. Choose the actual air-routing job before comparing materials and appearance.Elevated Intake SnorkelsARB Safari Rspec, Vspec and Armax references target named engine/chassis combinations. K&N elevated intake kits also distinguish Tacoma, 4Runner and Bronco applications. Compare required connections, intake-box compatibility and bodywork with the exact kit.aFe lists a separate Gladiator Mojave 3.6L D.A.S. snorkel from its other JL/JT configuration. Match the actual trim and induction layout rather than assuming all Gladiator snorkels use the same installation.Dynamic Scoops and Air CatchersaFe Challenger Air Catcher references include polyethylene color choices and a carbon-fiber version. Other dynamic scoops na...
View Scoops & Snorkels Products
Toyota Tacoma Parts and Accessories
Shop Toyota Tacoma parts for suspension projects, body protection, bed access and everyday maintenance at Black Ops Auto Works. Explore Fox, ICON and Old Man Emu references, bumper components, bed covers and cab-specific steps. Coordinate the complete order around your generation, powertrain, drivetrain, cab and bed.Suspension Across Tacoma GenerationsFox, Bilstein, ICON and OME references span different generations, axle positions and staged configurations. Match factory suspension, drivetrain and current ride height before comparing individual dampers, coilovers or complete systems. Extended-travel and load-specific references require their full supporting setup and installation plan reviewed.Body Protection, Steps and Bed EquipmentBumper, skid, recovery-point and running-board references serve different mounting positions and cab types. Bed toppers, covers and rack frames require exact bed and rail coverage. A topper listed as Box 1 with Box 2 required, or a rack frame requiring ...
View Toyota Tacoma Parts and Accessories Products