Size Chart
×
The aFe 49T40501-B12 MACH Force-Xp tip has a 4-inch inlet, 5-inch outlet and 12-inch length. Current manufacturer specifies 409 stainless steel, a wrinkle black powder-coated finish and single-wall, slash-cut rolled edge. A 304 stainless steel band clamp secures the inlet.
| Application | Exhaust | Configuration | Requirements |
|---|---|---|---|
| Specification-matched | Compatible 4-inch exhaust outlet | RIGHT bolt-on selection | Verify actual mating pipe, overlap, clamp engagement and clearance around the 5-inch outlet and 12-inch tip |
| Detail | Value |
|---|---|
| Brand / line | aFe POWER / MACH Force-Xp |
| Manufacturer Part Number | 49T40501-B12 |
| Product type | Tips |
| Material | 409 stainless steel |
| Finish | wrinkle black powder-coated |
| Inlet / outlet / length | 4 inches / 5 inches / 12 inches |
| Construction / edge | single-wall, slash-cut rolled edge |
| Mounting | Bolt-on; inlet; 304 stainless steel band clamp |
| Branding | Current exact manufacturer specifies laser-cut aFe POWER logo plate riveted to the tip. |
| Orientation / drainage | RIGHT selection; left-side suitability not established |
| Included | ONE tip assembly with 304 stainless steel band clamp |
| Coating heat-resistance claim | Up to 1600 degrees F per manufacturer; coating rating only, not a verified exhaust-gas temperature |
| Standalone torque / interval | No numeric torque, fixed insertion depth, rotation angle or recheck mileage supplied by selected page |
| UPC | 802959498934 |
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
One MACH Force-Xp wrinkle black powder-coated bolt-on exhaust tip with a 4-inch inlet, 5-inch outlet and 12-inch length. This is the manufacturer’s RIGHT selection.
Which dimensions must match?Match the 4-inch inlet to the actual mating exhaust pipe and verify overlap, clamp engagement and surrounding clearance. The 5-inch outlet and 12-inch tip length need sufficient bumper/body clearance. Universal does not guarantee every installation.
What is included?One wrinkle black powder-coated 409 stainless steel tip assembly with a 304 stainless steel band clamp. This is one exhaust-outlet accessory, not a complete cat-back, muffler, tailpipe or pair of tips. No gasket, hanger, sensor, valve motor, filter or intake coupler is itemized.
What material, edge and branding are specified?Current exact manufacturer identifies 409 stainless steel, single-wall, slash-cut rolled edge and wrinkle black powder-coated finish. Current exact manufacturer specifies laser-cut aFe POWER logo plate riveted to the tip.
Does it replace the muffler or provide verified power gains?No muffler or complete exhaust system is included. No actual standalone dyno, airflow or sound test is linked, so no numeric power increase or drone result is promised.
Is a left-side installation established?The selected manufacturer headline identifies this as RIGHT. No left-side clearance or logo-orientation compatibility is established by simply rotating it. Check the actual side and outlet position before installation.
What clamp torque and recheck interval apply?No standalone instruction link, numeric torque, insertion depth or fixed recheck mileage is supplied by this selected page. Follow the correct instructions for the supplied clamp. Do not borrow a complete exhaust system’s band-clamp torque or service interval.
Does the manufacturer supply an emissions statement?The current exact page states that no CARB EO number is required. This does not waive local sound or usage requirements or authorize changes to unrelated emissions equipment.
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.