aFe Power 20-91211R Momentum Pro 5R air filter cone shown at a three-quarter front angle showing the blue pleated media and black rubber top/base
aFe Power 20-91211R air filter side profile showing the inverted top inlet opening and molded flow-control ring
Top down view of the aFe Power 20-91211R air filter showing the round inlet opening and Pro 5R oiled cotton gauze media
Macro close up of the aFe Pro 5R five layer oiled cotton gauze filter media pleats used in the 20-91211R air filter
Click to zoom in

aFe Momentum Int Rplcmnt Air Filter w/ Pro 5R Media 3-1/8inF x 6inB x 4-1/2inT (Invert) x 6-1/4inH

aFe
AFE20-91211R
802959203743
Air Filters - Direct Fit
2 Units In Stock - Ships Next Business Day
$ 71.00
$ 71.00

This aFe filtration component is the Momentum Int Rplcmnt Air Filter w/ Pro 5R Media 3-1/8inF x 6inB x 4-1/2inT (Invert) x 6-1/4inH. Match the exact dimensions, media type, service method, mounting interface, flow requirement, and fluid or air-system application before ordering.

Key Features

  • Media and dimensions selected for the listed filtration application
  • Service method, flow direction, seal, and replacement interval are model specific
  • This aFe Momentum replacement filter uses Pro 5R oiled cotton gauze media in a 3-1/8in inlet flange by 6in height configuration, matching the sizing used across a range of aFe Momentum intake systems.
  • The red powder-coated wire support gives it the recognizable aFe look while providing dependable filtration and airflow.

Fitment

Years Make Model Application
Universal or specification-matched application. Verify every dimension, interface, operating requirement, and listing note.

Specifications

Brand aFe Power
Manufacturer Part Number 20-91211R
Product Type Air Filters - Direct Fit
Condition New
Configuration Momentum Int Rplcmnt Air Filter w/ Pro 5R Media 3-1/8inF x 6inB x 4-1/2inT (Invert) x 6-1/4inH
Detail Value
Media Type Pro 5R Oiled Cotton Gauze
Inlet Flange 3-1/8 in
Filter Height 6 in
Color Red
UPC Not assigned by manufacturer
Filter Media Pro 5R

What's Included

One new aFe air filters - direct fit in the exact configuration and quantity identified by this listing. Hardware, clamps, couplers, gaskets, sensors, wiring, fluids, calibration, and accessories are included only when expressly stated.

About aFe Power

aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.

Important Disclosures

  • California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

Frequently Asked Questions

How do I confirm the dimensions of the Momentum Int Rplcmnt Air Filter w/ Pro 5R Media 3-1/8inF x 6inB x 4-1/2inT (Invert) x 6-1/4inH (aFe 20-91211R)?
Match the flange or panel dimensions, shape, seal, height, and mounting interface; similar-looking filters are not necessarily interchangeable.

Is this filter washable and reusable?
That depends on its exact media. Follow the aFe cleaning or replacement instructions for the listed media and never oil a dry-media filter.

How often should the filter be serviced?
Inspect it based on driving conditions and restriction rather than mileage alone. Dust, water, off-road use, and construction traffic can shorten the interval.

Can I substitute a different aFe media type?
Only when aFe lists that media as a direct replacement for the same housing and dimensions. Confirm the exact replacement part number before ordering.

Installation Instructions

  1. Confirm aFe part number 20-91211R, the complete vehicle or specification-based application, and all required supporting components.
  2. Clean the housing and sealing surface so debris cannot enter the intake, cabin, engine, transmission, or fuel system.
  3. Install the element in the specified flow direction and orientation without distorting its seal or contaminating clean surfaces.
  4. Verify the housing closes evenly and record the correct inspection, cleaning, or replacement interval for the operating conditions.

Request For Information

Have questions about aFe Momentum Int Rplcmnt Air Filter w/ Pro 5R Media 3-1/8inF x 6inB x 4-1/2inT (Invert) x 6-1/4inH? Fill out the form below and we'll get back to you by the next business day.
aFe

aFe

aFe Power performance parts cover the complete airflow path and supporting vehicle systems, including cold air intakes, replacement filters, exhaust systems, intercoolers, charge pipes, tuning modules, suspension components, differential covers, transmission pans, and truck accessories. Shop by exact manufacturer part number and verify the complete vehicle, engine, drivetrain, emissions classification, dimensions, and included hardware before ordering. Cold Air Intakes and Filters Choose an aFe intake by exact vehicle and engine application, then compare tube design, sensor provisions, housing configuration, emissions status, and filter media. Pro DRY S dry media emphasizes simple maintenance without filter oil, while oiled media options use their own documented cleaning and service procedures. Replacement and universal filters must be matched by every flange, panel, seal, height, and flow-direction dimension. Exhaust and Emissions Fitment Cat-back, axle-back, DPF-back, header, down...

View aFe Products
Air Filters

Air Filters

Air filters and intake filtration parts for cars, trucks, SUVs, Jeeps, and diesel platforms are stocked at Black Ops Auto Works. Shop direct-fit filters, drop-in replacement filters, universal clamp-on filters, cabin air filters, HVAC filters, engine breather filters, pre-filters, and velocity stacks for Hellcat, Trackhawk, TRX, Grand Cherokee, Challenger, Charger, Camaro, Corvette, Mustang, F-150, Tacoma, Tundra, BMW, and Honda platforms. Every product is filterable by year, make, model, trim, engine, and filter dimension so the correct part ships the first time. Black Ops Auto Works carries 3,397 air filter SKUs across direct-fit, universal, cabin, and pre-filter categories. What This Collection Covers Air filters remove dirt, dust, and debris from air entering the engine or cabin. This collection spans OE-style direct-fit and drop-in filters, universal cone and clamp-on filters for custom intakes, cabin and HVAC filters for interior air, engine breather filters for crankcase ...

View Air Filters Products
Air Filters - Direct Fit

Air Filters - Direct Fit

Direct fit air filters for cars, trucks, SUVs, and powersports vehicles across every major make are stocked at Black Ops Auto Works. Shop OE replacement panel filters, drop in factory airbox filters, direct fit cold air intake replacement filters, and diesel truck air filters engineered to bolt straight into the stock airbox with no cutting or modification for gas and diesel platforms alike. Every product is filterable by year, make, model, trim, and engine so the correct filter ships the first time. Black Ops Auto Works carries 775 direct fit air filter SKUs across gas, diesel, and powersports applications. What This Collection Covers Direct fit air filters are engineered to the exact dimensions of a specific vehicle factory airbox or a specific aftermarket cold air intake housing. Unlike universal filters, direct fit filters require no measuring, no clamps, and no trimming, they drop into place using the factory seal and retention points. This collection spans daily driver rep...

View Air Filters - Direct Fit Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×