aFe Rebel Polished Cat-Back - Nissan Titan 5.6L

Nissan Titan Rebel polished cat-back

The aFe 49-46124-P Rebel cat-back uses 2.5-inch MIG-welded, mandrel-bent 409 stainless tubing and a free-flowing stainless muffler. Two 3.5-inch polished 304 stainless clamp-on tips exit ahead of the passenger rear tire. The exact current application covers 2004-2015 Titan gas V8-5.6L subject to the cab, bed and wheelbase limits below.

Key Features

• Selected aFe part 49-46124-P.
• 2.5-inch 409 stainless tubing; the old 3-inch system description is corrected.
• MIG-welded, mandrel-bent tubing and free-flowing stainless muffler.
• Two polished 304 stainless tips with laser-etched aFe logos and passenger mid-side exit.
• Selected guide replaces the rear hanger mount using a supplied bracket and isolator.
• Manufacturer describes no cutting; side steps may interfere.

Fitment

Extended cab with 6.6-foot bed or crew cab with 5.6-foot bed, both with 139.8-inch wheelbase. No other bed, wheelbase, generation or Nissan model is inferred. Side steps may interfere; confirm the actual vehicle before ordering. All seven original named groups and year bounds match the full exact-part table and remain unchanged.

Specifications

What's Included

• The 49-46124-P kit includes one driver front pipe 05-144268, one passenger front pipe 05-144269, one muffler assembly 05-144270, one dual tailpipe assembly 05-144271, four 2.5-inch bands 05-41061, one hanger bracket 05-46249, one isolation mount 05-46050 and two selected polished 304 stainless tips 49T30352-P09. The alternative black tips are not additional included parts.
• Reuse the original converter-flange nuts and rear hanger bolts as directed. The sheet lists no new front gaskets and gives no front-gasket reuse/replacement instruction; confirm correct sealing service before disassembly.

About aFe Power

aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.

Related Parts

• Exact selected Titan primary with cab limits and finish conflict
• Complete selected seven-step guide and parts diagram
• Full exact-part named Titan application table
• Shop cat-back exhaust systems

FAQ

It is a 2.5-inch muffler-equipped 409 stainless cat-back with two polished 304 stainless tips exiting ahead of the passenger rear tire.

Extended cab with 6.6-foot bed or crew cab with 5.6-foot bed, both with 139.8-inch wheelbase. No other bed, wheelbase, generation or Nissan model is inferred. Side steps may interfere; confirm the actual vehicle before ordering.

one driver front pipe 05-144268, one passenger front pipe 05-144269, one muffler assembly 05-144270, one dual tailpipe assembly 05-144271, four 2.5-inch bands 05-41061, one hanger bracket 05-46249, one isolation mount 05-46050 and two selected polished 304 stainless tips 49T30352-P09. The alternative black tips are not additional included parts.

The exact primary identifies the selected part as Polished Tips but repeats black-tip wording in Details and Overview. The selected P guide listing and all eight native photos show the polished configuration. The conflicting black description is qualified; no black tips or finish interchangeability are promised for this selected polished kit.

The selected seven-step sheet replaces the rear original hanger mount with the supplied bracket and isolation mount, reusing original bolts. Support the muffler assembly with a jack stand during installation. It does not prescribe the later Titan front-bracket conversion.

Reuse the original converter-flange nuts and rear hanger bolts as directed. The sheet lists no new front gaskets and gives no front-gasket reuse/replacement instruction; confirm correct sealing service before disassembly.

The sheet gives no numeric torque. Align system and tips before tightening nuts, bands and bolts. Maintain its at-least-1/2-to-1-inch tailpipe/body clearance and retighten all clamps and bolts after 50-100 miles.

No. The exact primary claims up to +19 hp/+22 lb-ft without a selected linked chart establishing conditions, modifications or point/peak values. No measured every-Titan result or drone-free promise is established.

Installation Instructions

1. Confirm aFe 49-46124-P against the exact vehicle and installed equipment. Inventory the actual components and follow the selected manufacturer instructions and current vehicle service requirements.
2. Verify the exact 5.6L Titan, named year range, cab, bed and 139.8-inch wheelbase. Confirm side-step clearance, selected polished finish and correct front sealing service before disassembly. Cool and support the vehicle safely.
3. Remove the original exhaust up to the catalytic converters, retaining hardware. Install the selected driver and passenger front pipes using the original nuts.
4. Place the four supplied 2.5-inch bands on the muffler assembly and install it on the front pipes. Support the muffler with a jack stand as the selected step requires.
5. Remove the original rear hanger mount. Install the supplied hanger bracket and isolation mount where the original mount was, using the original bolts.
6. Install the selected dual tailpipe assembly and two polished tips. Align the complete exhaust and tips before tightening all nuts, bands and bolts. No numeric torque is printed.
7. Maintain the guide's at-least-1/2-to-1-inch tailpipe-to-body spacing. Recheck work and retighten all clamps and bolts after 50-100 miles. No cutting, battery, sensor, ground-strap or crossmember procedure is borrowed.

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.