aFe 56-70005R is the Takeda Momentum enclosed intake for selected Hyundai and Kia 1.6L turbo applications. One Pro 5R filter locks into the solid XLPE housing with a closable side auxiliary inlet. The XLPE tube uses one aluminum NPT fitting and restores the original large and small hose connections. The manufacturer URL retains Stage-2 wording, but the exact kit details and manual identify the enclosed Momentum construction.
The exact 20-page manual specifies Elantra 2017–2020, Elantra GT Sport 2018–2020, Veloster 2019–2021, i30 2017–2022, Forte GT 2019–2022 and ProCeed GT 2019–2022, all 1.6L turbo. Exact selected-part named tables separately identify Elantra GT N Line 2019–2020, Veloster Turbo Ultimate 2019–2021 and Forte GT 2020–2024. These support the two restored named groups and the Forte year extension shown below. The later Forte 2023–2024 years are retailer-table support beyond the manual endpoint, not a claim that its cover was revised. Current broad manufacturer Elantra/Elantra GT/i30 2017–2024 wording does not independently identify each later US chassis or trim. Non-US i30/ProCeed markets and later Elantra N Line require exact market/chassis verification; no broad new mapping is inferred.
| Years | Make | Model | Named trim; actual engine and hood requirements apply |
|---|---|---|---|
| 2017-2020 | Hyundai | Elantra | Sport |
| 2018 | Hyundai | Elantra GT | Sport |
| 2019-2020 | Hyundai | Elantra GT | N Line |
| 2019-2021 | Hyundai | Veloster | Turbo |
| 2019-2021 | Hyundai | Veloster | Turbo R-Spec |
| 2019-2021 | Hyundai | Veloster | Turbo Ultimate |
| 2020-2024 | Kia | Forte | GT |
Verify 56-70005R against the actual engine, sensor and vent connections, mounting locations and applicable emissions requirements before ordering.
| Brand | aFe POWER |
| Manufacturer Part Number | 56-70005R |
| Product type | Takeda Momentum enclosed cold air intake |
| Selected filter | One 24-91108, 4-inch flange x 6-inch base x 5.5-inch inverted top x 7.5-inch height |
| Media | Five-layer pre-oiled cotton gauze; washable/reusable |
| Tube / housing | XLPE 05-5610005B1 / enclosed XLPE 05-5670005B2 |
| Coupling | 05-01490 silicone reducer; smaller end at turbo inlet |
| Main clamps | One #044 03-50019 and one #048 03-50007 |
| Hose fitting | One aluminum NPT fitting 03-50615 |
| Auxiliary inlet | 05-01527 included plug; closed reduces warmer engine-bay air and noise |
| Mounting | Three original grommets/sleeves and three original bolts; two new 03-50616 clips |
| Recheck / torque | 100–200-mile connection recheck; no numeric torque supplied |
| Quantity | Manufacturer service part | Component |
|---|---|---|
| 1 | 24-91108 | Selected filter; alternate media is not another included element |
| 1 | 05-5610005B1 | XLPE intake tube |
| 1 | 05-5670005B2 | Enclosed XLPE housing |
| 1 | 05-01527 | Auxiliary-inlet silicone plug |
| 1 | 05-01490 | Silicone reducer coupling |
| 1 | 03-50019, #044 | Coupling clamp |
| 1 | 03-50007, #048 | Coupling clamp |
| 1 | 03-50615 | Aluminum NPT hose fitting |
| 2 | 03-50616 | Replacement inlet retainer clips |
Reuse all three original housing grommets and sleeves and all three mounting bolts, including the bolt accessed inside the housing. Replace both original inlet rivets with the supplied clips. Keep the original large and small hose clamps and restore the engine cover. The procedure calls for a filter-flange clamp without a separate BOM service code/count; confirm supplied hardware. The duplicated step numbering and incorrect bolt-removal cross-reference do not change the explicitly retained three bolts. This solid enclosed housing has an included auxiliary-inlet plug; a clear window or Stage-2 top trim is not specified for this exact housing. Service supplies and optional front scoop are separate.
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
One 24-91108 Pro 5R filter. The opposite-media BOM row is an alternate, not a second filter.
Does this media need oil?Yes. Pro 5R has five cotton-gauze layers and is supplied pre-oiled; follow its cleaning and re-oiling procedure.
Does this enclosed housing have a clear inspection window?The exact manual and housing illustrations show a solid top. A clear window is not specified for this housing. It has an included side auxiliary-inlet plug.
How many threaded hose fittings are included?One aluminum NPT fitting, 03-50615. A small gap between its hex and the tube is normal.
How many original mounts and bolts transfer?All three housing grommets/sleeves and all three original mounting bolts, including the interior bolt.
Are the original inlet rivets reused?No. Two new 03-50616 retainer clips replace them. The original large and small hose clamps are reused.
What does the included side plug do?Closing the auxiliary inlet blocks warmer engine-bay air and reduces intake noise. Leaving it open permits additional air that may be warmer.
What torque and recheck interval apply?The manual gives no numeric torque. Recheck bolts, clamps and connectors after 100–200 miles and reinstall the engine cover.
Verify aFe 56-70005R. Work on a cool engine and remove the engine cover. Release the original large-hose clamp and both airbox-lid clips, then release the small-hose clamp near the firewall and loosen the turbo-inlet clamp. Remove the original upper airbox and tube together. Unlock/remove both inlet rivets, retain all three lower-housing bolts and lift out the lower housing/inlet assembly. Transfer all three original grommets and sleeves into the new housing. Fit the optional included side plug if the auxiliary inlet is to remain closed. Leaving it open admits extra air that can be warmer engine-bay air; closing it reduces that air and intake noise. Install it with all three original bolts, including one inside, and secure the inlet using the two supplied replacement clips. Lock the selected filter into the housing and leave its flange clamp loose. Install the single aluminum NPT fitting with a 16 mm tool; a small gap is normal. Fit the smaller coupling end to the turbo inlet with the two supplied clamps loose. Slide the tube into the coupling and filter, align and tighten the connections. Reconnect the small hose to the fitting and larger hose to the tube using retained clamps, then restore the engine cover. Recheck bolts, clamps and connectors after 100–200 miles. The exact manual gives no numeric torque or MAF-transfer step.
The exact linked bench chart compares 305 CFM Pro 5R, approximately 42% above stock 215 CFM at 7 inches H2O. The selected-media Dynojet image uses SAE correction and smoothing 5 but does not expose a complete test vehicle, run date, modification or weather record; the Stage-2 cat-back/fan/gear configuration is not borrowed. At the marked 5,880 rpm, 191.6 versus 175.9 hp and 171.1 versus 157.1 lb-ft differ by 15.7 hp and 14.0 lb-ft. Independent maximum power differs by 10.3 hp and maximum torque by 10.7 lb-ft. Marked-curve gains and independent peaks are different measurements, not guaranteed gains on every listed model. The exact manufacturer page and manual state this product is not CARB exempt and unavailable for purchase in California or use on California-registered vehicles.
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Shop aFe POWER intake systems, replacement filters, exhaust components, BladeRunner cooling parts and CONTROL chassis accessories at Black Ops Auto Works. Compare Momentum GT, Track Series and Magnum FORCE intake applications alongside Pro DRY S and Pro 5R filter choices. Choose a complete upgrade or a service component for the system already on your car, truck or SUV.Choose Your aFe Intake and FilterMomentum GT, Track Series and Magnum FORCECompare the intake housing, tubing, filter arrangement and finish offered for your engine. The collection includes Momentum GT applications, selected carbon-fiber Track Series systems and Magnum FORCE configurations. Each package supplies its own combination of induction components, so choose the design for the installation you want.Pro DRY S or Pro 5R Filter MediaPro DRY S uses oil-free media and skips the re-oiling step during service. Pro 5R is an oiled filter option with a different maintenance procedure. Choose a media configuration aFe off...
View aFe Products
Shop performance air intake systems for your next engine-bay upgrade at Black Ops Auto Works. Compare complete cold-air intakes, short-ram layouts and enclosed systems from Legmaker, JLT, aFe, K&N, Injen and other listed manufacturers. Choose the intake character, packaging and filter-service approach that suit the vehicle and the way you use it.Complete Intakes or a Focused Component UpgradeA complete intake is the place to start when changing the filter, tubing and enclosure as a matched package. An individual airbox, intake tube, coupler or replacement filter can be a better purchase when the rest of the installed system is staying. Compare what the package supplies before choosing between the two routes.For a naturally aspirated, turbocharged or supercharged engine, the connection and sensor arrangement are part of the design. Choose the complete system for that application rather than combining a large tube and filter solely by appearance.Cold-Air, Short-Ram and Enclosed De...
View Air Intake Systems Products
Shop cold air intakes, short-ram systems, closed-airbox packages and intake tubes at Black Ops Auto Works. Compare Legmaker carbon-fiber layouts with aFe, K&N, Injen, AEM, JLT, CORSA, Volant and other listed options. Choose the filter location, inlet connection, service requirements and induction character that suit the vehicle and build.Choose the Intake LayoutA closed-airbox system encloses the filter and uses its specified air-feed arrangement. An open-element or short-ram layout places the filter differently and can change the audible induction character. A longer routed intake, a short-ram system and a factory-airbox tube replacement involve different installation scopes.Compare the actual filter position, heat-shield/enclosure design, retained ducts and access for maintenance. A cold-air label alone does not establish a lower inlet temperature in every driving condition or a fixed horsepower gain. Review manufacturer testing for the exact system and application.Legmaker HE...
View Cold Air Intakes Products
Shop Hyundai Elantra GT parts for brake maintenance, clutch projects and chassis or airflow changes at Black Ops Auto Works. Compare Clutch Masters 1.6L turbo applications, Eibach sway-bar references and aFe air-scoop or charge-pipe choices. Match the exact generation, engine and transmission before choosing the combination.Clutch Choices for the 1.6L TurboClutch Masters FX350 and FX400 references name 2018–2020 1.6L turbo applications with aluminum flywheels and different friction arrangements. Compare complete coverage and intended use with the actual transmission and release system. Review the specified supporting components with your builder before selecting the package.Brakes and Chassis ProjectsCompare applicable Brembo, EBC or PowerStop brake references by axle, caliper and rotor dimensions, then review service-kit contents. Eibach anti-roll and end-link references identify their own GT application. SPC camber, SuperPro or Whiteline bushing references serve separate geometry ...
View Hyundai Elantra GT Parts and Accessories Products
Explore Hyundai Elantra parts for brake maintenance, filtration, exhaust service and exterior projects at Black Ops Auto Works. Compare the applicable service references for your generation and engine, then review trim-specific performance or body components separately. Sedan, Coupe, GT, N and Hybrid configurations require their own complete application checks.Brake-Service OptionsDFC and Brembo rotor or pad references and PowerStop packages span different production ranges and installed brake assemblies. Rear drums, disc rotors and friction sets serve different service tasks. Match actual axle, caliper or drum dimensions and complete trim coverage before comparing kit contents and intended use.Exhaust, Filters and Chassis WorkBRExhaust front-pipe and MagnaFlow references identify specific engine and production applications and their own supplied sections. Match exact configuration and connections before choosing them. aFe air-filter, KYB damper or boot and other chassis references ...
View Hyundai Elantra Parts and Accessories Products
Shop Hyundai Veloster parts for exhaust projects, brake maintenance, chassis changes and exterior styling at Black Ops Auto Works. Compare GReddy exhaust applications, PowerStop kits, Goodridge lines, AST springs and APR front splitters. Start with your generation and engine so standard, Turbo and N references stay matched to the correct car.Exhaust and Intake Choices by EngineThe GReddy Supreme SP title names 2011–2016 Veloster coverage, while a separate Injen intake names the 1.6-liter Turbo application. Review full engine, production and system coverage before choosing either. Parts named for the 2.0-liter N belong to a separate application review rather than a general Veloster assumption.Brake Kits and Goodridge LinesCompare applicable PowerStop front or rear kits with the pads, rotors and hardware needed for each axle. The Goodridge listing identifies a four-line set for its stated 2013–2016 Veloster range. Match brake equipment and complete hose coverage, then review installat...
View Hyundai Veloster Parts and Accessories Products
Shop Hyundai Veloster Turbo parts for exhaust and intake projects, chassis changes and brake service at Black Ops Auto Works. Compare Borla and Solo exhaust applications, aFe system sections, K&N intakes and Eibach kits. Build the order around your generation, transmission and the components already fitted.Complete Exhausts and Individual SectionsThe Borla cat-back names the stated 2013–2015 1.6-liter Turbo application, while other Borla references specify rear sections only. Solo V-Mach and aFe Takeda listings offer different system arrangements and production coverage. Compare a complete cat-back with a mid-pipe or axle-back by the exact sections supplied and the equipment retained.Intakes and Supporting InterfacesK&N and AEM list Veloster 1.6-liter Turbo intake applications. aFe references include separate non-turbo options, which require their own engine coverage. Torque Solution adapter choices name different blow-off-valve interfaces; match the selected valve and curre...
View Hyundai Veloster Turbo Parts and Accessories Products
Explore Kia Forte parts for exhaust projects, suspension service and everyday cabin care at Black Ops Auto Works. Compare named GT aFe and MBRP choices with engine-specific intakes, KYB service references and Eibach springs. Build the order around actual production, body, trim and engine.GT Exhaust and Engine-Specific Intake ProjectsBuild a Forte GT 1.6L exhaust order with aFe Takeda mid-pipe and axle-back options or the MBRP system specified for your year and body. Compare cat-back and axle-back contents, connection points and tip layout before choosing the service scope. Select an Injen intake independently for the exact engine; review a 2.0L application separately from GT 1.6L equipment.KYB Suspension Service and Eibach SpringsFor rear-shock service, compare the KYB Excel-G application for the specified 2019–2023 Forte 2.0L range with current trim, mounting and suspension equipment. Check rear mounts and protective boots separately. For an Eibach Pro-Kit spring change, review com...
View Kia Forte Parts and Accessories Products
