-20%
aFe Takeda Momentum Pro DRY S Cold Air Intake System 2018 Honda Accord I4 2.0L (t) aFe AFE56-70003D
aFe Takeda Momentum Pro DRY S Cold Air Intake System 2018 Honda Accord I4 2.0L (t) aFe AFE56-70003D
aFe Takeda Momentum Pro DRY S Cold Air Intake System 2018 Honda Accord I4 2.0L (t) aFe AFE56-70003D
aFe Takeda Momentum Pro DRY S Cold Air Intake System 2018 Honda Accord I4 2.0L (t) aFe AFE56-70003D
aFe Takeda Momentum Pro DRY S Cold Air Intake System 2018 Honda Accord I4 2.0L (t) aFe AFE56-70003D
aFe Takeda Momentum Pro DRY S Cold Air Intake System 2018 Honda Accord I4 2.0L (t) aFe AFE56-70003D
Click to zoom in

aFe Honda Accord 2.0T Dry Momentum

aFe
AFE56-70003D
802959560051
Cold Air Intakes
3 Units In Stock
$ 483.75 $ 387.00
$ 387.00

Honda Accord turbo Takeda Momentum intake

aFe 56-70003D This 2.0L turbo-specific Takeda Momentum system uses one oil-free synthetic filter with an XLPE tube and sealed housing with an integrated front scoop. Original MAF and exact engine-specific connections are retained.

Key Features

  • ONE 21-91103 three-layer oil-free synthetic inverted 7-1/2-inch filter is selected. The tube 05-5670003B1 and shared sealed sight-window housing 05-5670002B2 are XLPE with a built-in front scoop; retailer aluminum wording is not the primary material specification. Included hardware is silicone coupling 05-01455, TWO #044 clamps, TWO M4 MAF screws and TWO M5 purge-jet screws. Transfer ONE original sleeved housing grommet with metal insert plus the BOTTOM original push-on grommet. Reuse ONE of TWO removed original housing screws and all FOUR original scoop push clips to mount the new inlet. Transfer the ORIGINAL purge jet with the supplied M5 screws and reconnect BOTH original hoses; insert the ORIGINAL crankcase line into the supplied coupling. Transfer the ORIGINAL MAF using the M4 screws and reconnect its original harness. No new sensor, purge jet, electrical extension, new vent hose, split loom or auxiliary plug is listed. Filter-interface clamp use appears without a separate loose-hardware code.
  • The actual linked chart measures 360 CFM for selected dry media versus stock 290 CFM at 7 inches H2O, about 24.1% higher, rounded to 24%. The other media bar is a separate configuration.
  • Original mounting grommets and factory scoop clips retained at their specified locations.

Fitment

Honda Accord 2018-2022 with the gasoline turbocharged L4-2.0L. Both exact current manufacturer pages and the shared 12-page manual cover those years. Exact-part tables support Sport/Touring 2018-2022; both existing ranges are extended through 2022, while EX-L remains 2018-2020. Four old 2018 hybrid groups conflict with this turbo-inlet/purge-jet application: Honda identifies the Hybrid as a distinct 2.0L Atkinson-cycle two-motor powertrain. Despite positive broad retailer tables, those hybrid groups are withheld as source conflicts, rather than independently tested physical-incompatibility claims. No hybrid, 1.5L turbo or redesigned 2023-and-later scope is inferred; the manufacturer explicitly excludes 1.5L turbo models.

Years Make Model Named trim; actual engine and hood requirements apply
2018-2020 Honda Accord EX-L
2018-2022 Honda Accord Sport
2018-2022 Honda Accord Touring

Verify 56-70003D against the actual engine, sensor and vent connections, mounting locations and applicable emissions requirements before ordering.

Specifications

Brand aFe POWER
Manufacturer Part Number 56-70003D
Application Honda Accord 2018-2022 with the gasoline turbocharged L4-2.0L. Both exact current manufacturer pages and the shared 12-page manual cover those years. Exact-part tables support Sport/Touring 2018-2022; both existing ranges are extended through 2022, while EX-L remains 2018-2020. Four old 2018 hybrid groups conflict with this turbo-inlet/purge-jet application: Honda identifies the Hybrid as a distinct 2.0L Atkinson-cycle two-motor powertrain. Despite positive broad retailer tables, those hybrid groups are withheld as source conflicts, rather than independently tested physical-incompatibility claims. No hybrid, 1.5L turbo or redesigned 2023-and-later scope is inferred; the manufacturer explicitly excludes 1.5L turbo models.
Selected filter 21-91103 / Pro DRY S / 7-1/2-inch inverted top
Tube / housing 05-5670003B1 / 05-5670002B2 / XLPE
Included / reused contents ONE 21-91103 three-layer oil-free synthetic inverted 7-1/2-inch filter is selected. The tube 05-5670003B1 and shared sealed sight-window housing 05-5670002B2 are XLPE with a built-in front scoop; retailer aluminum wording is not the primary material specification. Included hardware is silicone coupling 05-01455, TWO #044 clamps, TWO M4 MAF screws and TWO M5 purge-jet screws. Transfer ONE original sleeved housing grommet with metal insert plus the BOTTOM original push-on grommet. Reuse ONE of TWO removed original housing screws and all FOUR original scoop push clips to mount the new inlet. Transfer the ORIGINAL purge jet with the supplied M5 screws and reconnect BOTH original hoses; insert the ORIGINAL crankcase line into the supplied coupling. Transfer the ORIGINAL MAF using the M4 screws and reconnect its original harness. No new sensor, purge jet, electrical extension, new vent hose, split loom or auxiliary plug is listed. Filter-interface clamp use appears without a separate loose-hardware code.
Mounting / insertion order ONE original sleeved grommet plus bottom push-on grommet / ONE original housing screw / FOUR original scoop clips / FILTER FIRST, then coupling
Bench-flow qualification The actual linked chart measures 360 CFM for selected dry media versus stock 290 CFM at 7 inches H2O, about 24.1% higher, rounded to 24%. The other media bar is a separate configuration.
Dyno qualification The actual dry-media 2018 Accord report at 4,213 rpm marks 212.46 versus 202.76 hp and 264.84 versus 252.78 lb-ft: +9.70 hp/+12.06 lb-ft. Printed maxima are 251.20 versus 239.27 hp and 273.91 versus 265.78 lb-ft: +11.93 hp/+8.13 lb-ft peak-to-peak. Both SAE factors are 1.03, with July 23 versus July 16, 2018 dates. The 12 hp/10 lb-ft headline is not exactly either comparison. Both runs list OE exhaust, fourth gear and OBD2 rpm; hood, tires, fan and ECU details are not supplied. Differing conditions limit generalization; no guaranteed gain or hybrid result is established.
Recheck / torque 100-200 miles / no numeric torque supplied
Emissions The exact current manufacturer pages state that these intakes are not currently CARB exempt and are unavailable for purchase in California or use on vehicles registered with the California DMV. Older race-use wording in the linked manuals does not override that current restriction.

What's Included

Quantity Manufacturer service part Component
1 21-91103 Selected Pro DRY S filter only
1 05-5670003B1 XLPE intake tube
1 05-5670002B2 Sealed XLPE sight-window housing with integrated front scoop
1 05-01455 Exact engine-specific silicone coupling
2 03-50019 #044 clamps
2 03-50491 M4 Torx MAF screws
2 03-50322 M5 screws for ORIGINAL purge jet

ONE 21-91103 three-layer oil-free synthetic inverted 7-1/2-inch filter is selected. The tube 05-5670003B1 and shared sealed sight-window housing 05-5670002B2 are XLPE with a built-in front scoop; retailer aluminum wording is not the primary material specification. Included hardware is silicone coupling 05-01455, TWO #044 clamps, TWO M4 MAF screws and TWO M5 purge-jet screws. Transfer ONE original sleeved housing grommet with metal insert plus the BOTTOM original push-on grommet. Reuse ONE of TWO removed original housing screws and all FOUR original scoop push clips to mount the new inlet. Transfer the ORIGINAL purge jet with the supplied M5 screws and reconnect BOTH original hoses; insert the ORIGINAL crankcase line into the supplied coupling. Transfer the ORIGINAL MAF using the M4 screws and reconnect its original harness. No new sensor, purge jet, electrical extension, new vent hose, split loom or auxiliary plug is listed. Filter-interface clamp use appears without a separate loose-hardware code.

About aFe Power

aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.

Related Parts

Frequently Asked Questions

Which Accord engine, years and trims apply for 56-70003D?

Honda Accord 2018-2022 with the gasoline turbocharged L4-2.0L. Both exact current manufacturer pages and the shared 12-page manual cover those years. Exact-part tables support Sport/Touring 2018-2022; both existing ranges are extended through 2022, while EX-L remains 2018-2020. Four old 2018 hybrid groups conflict with this turbo-inlet/purge-jet application: Honda identifies the Hybrid as a distinct 2.0L Atkinson-cycle two-motor powertrain. Despite positive broad retailer tables, those hybrid groups are withheld as source conflicts, rather than independently tested physical-incompatibility claims. No hybrid, 1.5L turbo or redesigned 2023-and-later scope is inferred; the manufacturer explicitly excludes 1.5L turbo models.

Which selected filter, tube and hardware are supplied?

ONE 21-91103 three-layer oil-free synthetic inverted 7-1/2-inch filter is selected. The tube 05-5670003B1 and shared sealed sight-window housing 05-5670002B2 are XLPE with a built-in front scoop; retailer aluminum wording is not the primary material specification. Included hardware is silicone coupling 05-01455, TWO #044 clamps, TWO M4 MAF screws and TWO M5 purge-jet screws. Transfer ONE original sleeved housing grommet with metal insert plus the BOTTOM original push-on grommet. Reuse ONE of TWO removed original housing screws and all FOUR original scoop push clips to mount the new inlet. Transfer the ORIGINAL purge jet with the supplied M5 screws and reconnect BOTH original hoses; insert the ORIGINAL crankcase line into the supplied coupling. Transfer the ORIGINAL MAF using the M4 screws and reconnect its original harness. No new sensor, purge jet, electrical extension, new vent hose, split loom or auxiliary plug is listed. Filter-interface clamp use appears without a separate loose-hardware code.

Which original mounting parts and clips are reused?

ONE original sleeved grommet plus bottom push-on grommet / ONE original housing screw / FOUR original scoop clips

Does the original MAF use a new extension?

Transfer the ORIGINAL MAF using TWO supplied M4 screws and reconnect its original harness. No electrical extension or new sensor is listed.

What are the original purge and crankcase requirements?

Transfer the ORIGINAL purge jet with TWO supplied M5 screws, reconnect BOTH original hoses and insert the ORIGINAL crankcase line into the supplied coupling. No new jet or vent hose is supplied.

Which tube end is installed first?

FILTER FIRST, then coupling. Follow the exact engine-specific manual; the two Accord engines have different documented insertion sequences.

What do the actual selected-media tests establish?

The actual linked chart measures 360 CFM for selected dry media versus stock 290 CFM at 7 inches H2O, about 24.1% higher, rounded to 24%. The other media bar is a separate configuration. The actual dry-media 2018 Accord report at 4,213 rpm marks 212.46 versus 202.76 hp and 264.84 versus 252.78 lb-ft: +9.70 hp/+12.06 lb-ft. Printed maxima are 251.20 versus 239.27 hp and 273.91 versus 265.78 lb-ft: +11.93 hp/+8.13 lb-ft peak-to-peak. Both SAE factors are 1.03, with July 23 versus July 16, 2018 dates. The 12 hp/10 lb-ft headline is not exactly either comparison. Both runs list OE exhaust, fourth gear and OBD2 rpm; hood, tires, fan and ECU details are not supplied. Differing conditions limit generalization; no guaranteed gain or hybrid result is established.

What recheck and emissions requirements apply?

Recheck after 100-200 miles; no numeric torque is supplied. The exact current manufacturer pages state that these intakes are not currently CARB exempt and are unavailable for purchase in California or use on vehicles registered with the California DMV. Older race-use wording in the linked manuals does not override that current restriction.

Installation Instructions

Verify aFe 56-70003D. With a cool engine and negative battery terminal disconnected, unplug the MAF, unclip its original harness, remove FOUR original scoop push clips and pull out the old scoop. Loosen the original turbo-inlet coupling clamp, disconnect BOTH purge-jet hoses and pull the crankcase line from the original coupling. Remove TWO original 10mm housing screws and lift the original intake from its bottom grommet. Lock the selected filter into the new housing. Transfer ONE original sleeved grommet with its metal insert plus the BOTTOM original push-on grommet. Seat the housing on the original mounting peg and secure with ONE original housing screw. Reuse FOUR original push clips to secure the housing inlet. Insert the ORIGINAL crankcase line into the supplied coupling and loosely fit that assembly over the turbo inlet with both clamps. Remove the ORIGINAL purge jet from the old tube and transfer it using the supplied TWO M5 screws. Transfer the original MAF using TWO supplied M4 screws. Insert the tube into the FILTER FIRST, then the coupling. Reconnect the original MAF harness and BOTH purge-jet hoses, align and tighten all clamps. Verify all routing and clearances, reconnect the battery and recheck bolts, clamps and connectors after 100-200 miles. No numeric torque is supplied. Do not substitute the 1.5T coupling, missing purge-jet provisions or tube installation order.

Important Disclosures

Honda Accord 2018-2022 with the gasoline turbocharged L4-2.0L. Both exact current manufacturer pages and the shared 12-page manual cover those years. Exact-part tables support Sport/Touring 2018-2022; both existing ranges are extended through 2022, while EX-L remains 2018-2020. Four old 2018 hybrid groups conflict with this turbo-inlet/purge-jet application: Honda identifies the Hybrid as a distinct 2.0L Atkinson-cycle two-motor powertrain. Despite positive broad retailer tables, those hybrid groups are withheld as source conflicts, rather than independently tested physical-incompatibility claims. No hybrid, 1.5L turbo or redesigned 2023-and-later scope is inferred; the manufacturer explicitly excludes 1.5L turbo models. The exact current manufacturer pages state that these intakes are not currently CARB exempt and are unavailable for purchase in California or use on vehicles registered with the California DMV. Older race-use wording in the linked manuals does not override that current restriction. The actual dry-media 2018 Accord report at 4,213 rpm marks 212.46 versus 202.76 hp and 264.84 versus 252.78 lb-ft: +9.70 hp/+12.06 lb-ft. Printed maxima are 251.20 versus 239.27 hp and 273.91 versus 265.78 lb-ft: +11.93 hp/+8.13 lb-ft peak-to-peak. Both SAE factors are 1.03, with July 23 versus July 16, 2018 dates. The 12 hp/10 lb-ft headline is not exactly either comparison. Both runs list OE exhaust, fourth gear and OBD2 rpm; hood, tires, fan and ECU details are not supplied. Differing conditions limit generalization; no guaranteed gain or hybrid result is established.

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

aFe

aFe

Shop aFe POWER intake systems, replacement filters, exhaust components, BladeRunner cooling parts and CONTROL chassis accessories at Black Ops Auto Works. Compare Momentum GT, Track Series and Magnum FORCE intake applications alongside Pro DRY S and Pro 5R filter choices. Choose a complete upgrade or a service component for the system already on your car, truck or SUV.Choose Your aFe Intake and FilterMomentum GT, Track Series and Magnum FORCECompare the intake housing, tubing, filter arrangement and finish offered for your engine. The collection includes Momentum GT applications, selected carbon-fiber Track Series systems and Magnum FORCE configurations. Each package supplies its own combination of induction components, so choose the design for the installation you want.Pro DRY S or Pro 5R Filter MediaPro DRY S uses oil-free media and skips the re-oiling step during service. Pro 5R is an oiled filter option with a different maintenance procedure. Choose a media configuration aFe off...

View aFe Products
Air Intake Systems

Air Intake Systems

Shop performance air intake systems for your next engine-bay upgrade at Black Ops Auto Works. Compare complete cold-air intakes, short-ram layouts and enclosed systems from Legmaker, JLT, aFe, K&N, Injen and other listed manufacturers. Choose the intake character, packaging and filter-service approach that suit the vehicle and the way you use it.Complete Intakes or a Focused Component UpgradeA complete intake is the place to start when changing the filter, tubing and enclosure as a matched package. An individual airbox, intake tube, coupler or replacement filter can be a better purchase when the rest of the installed system is staying. Compare what the package supplies before choosing between the two routes.For a naturally aspirated, turbocharged or supercharged engine, the connection and sensor arrangement are part of the design. Choose the complete system for that application rather than combining a large tube and filter solely by appearance.Cold-Air, Short-Ram and Enclosed De...

View Air Intake Systems Products
Cold Air Intakes

Cold Air Intakes

Shop cold air intakes, short-ram systems, closed-airbox packages and intake tubes at Black Ops Auto Works. Compare Legmaker carbon-fiber layouts with aFe, K&N, Injen, AEM, JLT, CORSA, Volant and other listed options. Choose the filter location, inlet connection, service requirements and induction character that suit the vehicle and build.Choose the Intake LayoutA closed-airbox system encloses the filter and uses its specified air-feed arrangement. An open-element or short-ram layout places the filter differently and can change the audible induction character. A longer routed intake, a short-ram system and a factory-airbox tube replacement involve different installation scopes.Compare the actual filter position, heat-shield/enclosure design, retained ducts and access for maintenance. A cold-air label alone does not establish a lower inlet temperature in every driving condition or a fixed horsepower gain. Review manufacturer testing for the exact system and application.Legmaker HE...

View Cold Air Intakes Products
Honda Accord Parts and Accessories

Honda Accord Parts and Accessories

Shop Honda Accord parts for intake upgrades, clutch work, brake maintenance and suspension projects at Black Ops Auto Works. Compare Injen intake applications, Action Clutch or Clutch Masters kits and brake-service choices. Build an order around your Accord generation, engine, body and transmission.Intake and Engine-Service ChoicesInjen references name specific applications such as the 2018–2020 1.5L turbo Accord and earlier four-cylinder models. Compare full engine coverage, routing and package contents before choosing an intake. Fuel-system, gasket and other engine references have separate interfaces and calibration requirements; match the actual engine and existing modifications with your builder or tuner.Clutch Kits and FlywheelsAction Clutch and Clutch Masters listings span different engines and manual transmissions, including separate 1.5T, 2.0T and V6 applications. Compare intended use, friction arrangement and the flywheel specified for the kit. Aluminum, chromoly and OE-HD ...

View Honda Accord Parts and Accessories Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×