The aFe 57-10006R Track Series S55 intake uses two carbon fiber tubes, two Pro 5R filters and two open XLPE housings for the listed M2 Competition, M3 and M4 applications. Both original MAF sensors transfer, and the factory carbon strut brace must be removed and reinstalled during the illustrated procedure.
| Years | Make | Model | Application |
|---|---|---|---|
| 2019–2021 | BMW | M2 Competition (F87) | 3.0L twin-turbo S55 |
| 2015–2018 | BMW | M3 (F80) | 3.0L twin-turbo S55; retained existing range |
| 2015–2020 | BMW | M4 (F82/F83) | 3.0L twin-turbo S55 |
57-10006R: The current page names M2 Competition 2019–2021 and M3/M4 2015–2020 as a family. The older manual cover names M2 Competition 2019 and M3/M4 2015–2019. Those family headings are not proof of every individual model/trim production year; the existing M3 2015–2018 range is retained without expanding it to the manual’s 2019 heading. Existing CS/GTS rows are not separate full trim certification.
| Detail | Value |
|---|---|
| Manufacturer Part Number | 57-10006R |
| Filters supplied | Two 24-91145 Pro 5R filters |
| Tube construction | Twill-weave carbon fiber |
| Housing construction | Open XLPE polymer |
| Sensor hardware | Four M4x0.7x10 screws for two original MAF sensors |
| Included connection | One silicone elbow 05-01334 and two 03-50007 clamps |
| Emissions | Current page: not CARB exempt/unavailable for California purchase or California-registered vehicles. Older manual also states California race vehicles only and prohibits public-road use in California and states adopting those regulations. |
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
A dual-filter Track Series carbon fiber tube intake for the listed S55 M2 Competition, M3 and M4 applications.
Does it also fit the N55 M2?No N55 application is established for this S55 dual-filter kit. The N55 M2 uses a different configuration.
Are dry filters included as well?No. This R kit supplies two Pro 5R oiled filters; the two dry filters in the manual are the alternative D kit.
Are both housings carbon fiber?No. The tubes are carbon fiber and the housings are XLPE polymer.
Does the strut brace need removal?Yes. The manual removes the windshield covers and factory carbon front strut brace for access, then reinstalls them. Keep the hood cable clear when restoring the brace.
Which trim seal goes on each side?The shorter 24 in. seal goes on the driver-side housing; the longer 26.5 in. seal is for the passenger housing.
Does every model share the same final year?The current page names M2 Competition 2019–2021 and M3/M4 2015–2020 as a family. The older manual cover names M2 Competition 2019 and M3/M4 2015–2019. Those family headings are not proof of every individual model/trim production year; the existing M3 2015–2018 range is retained without expanding it to the manual’s 2019 heading. Existing CS/GTS rows are not separate full trim certification.
Is it CARB exempt?The current page says it is not currently CARB exempt. The older manual includes a California race-only notice; no public-road exemption is established.
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Shop aFe POWER intake systems, replacement filters, exhaust components, BladeRunner cooling parts and CONTROL chassis accessories at Black Ops Auto Works. Compare Momentum GT, Track Series and Magnum FORCE intake applications alongside Pro DRY S and Pro 5R filter choices. Choose a complete upgrade or a service component for the system already on your car, truck or SUV.Choose Your aFe Intake and FilterMomentum GT, Track Series and Magnum FORCECompare the intake housing, tubing, filter arrangement and finish offered for your engine. The collection includes Momentum GT applications, selected carbon-fiber Track Series systems and Magnum FORCE configurations. Each package supplies its own combination of induction components, so choose the design for the installation you want.Pro DRY S or Pro 5R Filter MediaPro DRY S uses oil-free media and skips the re-oiling step during service. Pro 5R is an oiled filter option with a different maintenance procedure. Choose a media configuration aFe off...
View aFe Products
Shop performance air intake systems for your next engine-bay upgrade at Black Ops Auto Works. Compare complete cold-air intakes, short-ram layouts and enclosed systems from Legmaker, JLT, aFe, K&N, Injen and other listed manufacturers. Choose the intake character, packaging and filter-service approach that suit the vehicle and the way you use it.Complete Intakes or a Focused Component UpgradeA complete intake is the place to start when changing the filter, tubing and enclosure as a matched package. An individual airbox, intake tube, coupler or replacement filter can be a better purchase when the rest of the installed system is staying. Compare what the package supplies before choosing between the two routes.For a naturally aspirated, turbocharged or supercharged engine, the connection and sensor arrangement are part of the design. Choose the complete system for that application rather than combining a large tube and filter solely by appearance.Cold-Air, Short-Ram and Enclosed De...
View Air Intake Systems Products
Build your BMW M project around the way you drive: a richer exhaust note, improved cooling support, refreshed brakes or a distinctive carbon-fiber finish. Black Ops Auto Works brings together Akrapovic, Dinan, do88, Bilstein and other model-specific choices. Select your M model, then compare complete systems and focused upgrades for its chassis and engine.Exhaust Sound and System ChoicesCompare exhaust coverage and construction as well as sound. Dinan’s D660-0082-BLK axle-back and X-pipe for the supported F87 M2 Competition includes black tips and retains factory electronic valve operation. Akrapovic’s G87 M2 titanium Slip-On reference replaces a different section and requires separately selected tips. Choose the exact system and finishing pieces for the car rather than comparing the system names alone.Cooling Capacity and Underbody Protectiondo88 intake and cooling applications separate charge-air, coolant and transmission projects across BMW M generations. Koyo’s N-FLO heat-exchan...
View BMW M Products
Shop BMW M2 Competition parts and accessories for brake, cooling, suspension and exterior projects at Black Ops Auto Works. Compare EBC pads, SHW rotors, AST suspension options, CSF cooling components and ADRO carbon-fiber applications. Build the order around your exact F87 setup and intended use.Brake Pads and Rotors for the JobCompare applicable EBC, Hawk and PowerStop compounds around road use or repeated high-temperature braking after identifying the exact brake assembly. SHW’s cross-drilled rear rotors are side-specific replacement choices: select the correct left and right references, disc specification and service quantity. Review pad, sensor and fitting-hardware needs alongside disc inspection to build a complete axle-service order.Cooling and Suspension ChoicesDinan’s charge-cooling heat exchanger and CSF’s auxiliary radiator serve different locations in the supported cooling arrangement. CSF 8258 uses an all-aluminum core and rock guard; the selected radiator is sold indiv...
View BMW M2 Competition Parts and Accessories Products
Explore BMW M2 parts and accessories for exhaust, intake, cooling, brake and exterior projects at Black Ops Auto Works. Compare Akrapovic, Dinan, do88 and other listed options across M2 applications. Choose your exact generation and engine before planning the combination for your build.Exhaust and Intake Options by GenerationChoose a sound and material change for the exact F87 or G87 powertrain. Dinan’s F87 M2 Competition axle-back and X-pipe is a stainless system with black tips and factory electronic valve operation retained. The Akrapovic S-BM/T/34H G87 titanium Slip-On replaces the rear silencer and requires a separate compatible tip set. For the supported earlier N55 M2, Dinan D760-0038 is an intake project with a larger filter, airbox lid and carbon tube. These packages serve different chassis and engine applications, so compare the complete installed system.do88 Cooling and Airflow Componentsdo88 separates N55-era M2, S55 F87 Competition and S58 G87 cooling applications. A ch...
View BMW M2 Parts and Accessories Products
Shop BMW M3 parts for the driving experience and finish you want, from a more distinctive exhaust note to cooling support, a brake refresh or carbon-fiber bodywork. Black Ops Auto Works brings together Dinan, do88, Seibon and other generation-specific options. Choose the exact chassis and engine, then compare complete systems with focused upgrades for your build.Exhaust and Intake Choices by GenerationDinan D660-0050 offers a stainless axle-back and polished quad tips for its supported F80 application while retaining factory valve operation. Other E9X and G80 exhaust or intake packages have different sound, material and installation choices. Compare the sections replaced, valve-control arrangement and supplied finishing pieces as part of the full project cost.Cooling Circuits and Underbody Protectiondo88 separates engine, charge-cooling and transmission applications across M3 generations. Match the circuit being addressed before choosing a radiator, heat exchanger, hose set or coole...
View BMW M3 Parts and Accessories Products
Make your BMW M4 build more focused with exhaust, cooling, suspension and carbon-fiber upgrades at Black Ops Auto Works. Compare Dinan sound and intake packages, do88 cooling choices and brake-service components for the driving you do. Select the exact F8X or G8X coupe or convertible application, then plan the complete project.Dinan Exhaust and Intake ChoicesFor its supported F8X application, Dinan D660-0050 provides a stainless axle-back with polished quad tips and retained factory valve operation. Other G8X axle-back and middle-exhaust choices cover different system sections. Compare valves, tips and the existing exhaust when choosing sound and installation scope. For an engine-bay update, the listed S58 Dinan matte carbon-fiber intake combines a complete intake project with a different finish from gloss-carbon alternatives.Cooling and Suspension ApplicationsChoose the cooling component for the circuit being addressed. The F8X S55 Koyo N-FLO heat exchanger, do88 S58 auxiliary-radi...
View BMW M4 Parts and Accessories Products
Shop carbon-fiber parts, composite bodywork and matching accessories at Black Ops Auto Works. Build a coordinated look with hoods, front lips, spoilers, diffusers, grilles, badges and interior details, or compare carbon-fiber intake and exhaust-tip components for a defined performance project. Choose the actual material, finish and vehicle application of each part.Black Ops Hoods and Grand Cherokee BodyworkBlack Ops WK2 hood choices include Sniper, Demon and CFR designs with different surface shapes and openings. The Sniper uses a raised center scoop and side louvers; the Demon features its own molded center vent-ring opening. Compare the look and physical configuration rather than assigning an unverified cooling gain to the name.Selected Black Ops hood references offer full fiberglass, carbon/fiberglass and full-carbon constructions. The visible carbon option and paint-ready fiberglass variant have different finishes and may have different weights. Choose the exact configuration an...
View Carbon Fiber Parts & Accessories Products
Shop cold air intakes, short-ram systems, closed-airbox packages and intake tubes at Black Ops Auto Works. Compare Legmaker carbon-fiber layouts with aFe, K&N, Injen, AEM, JLT, CORSA, Volant and other listed options. Choose the filter location, inlet connection, service requirements and induction character that suit the vehicle and build.Choose the Intake LayoutA closed-airbox system encloses the filter and uses its specified air-feed arrangement. An open-element or short-ram layout places the filter differently and can change the audible induction character. A longer routed intake, a short-ram system and a factory-airbox tube replacement involve different installation scopes.Compare the actual filter position, heat-shield/enclosure design, retained ducts and access for maintenance. A cold-air label alone does not establish a lower inlet temperature in every driving condition or a fixed horsepower gain. Review manufacturer testing for the exact system and application.Legmaker HE...
View Cold Air Intakes Products
