Click to zoom in
Airaid Dry Intake for 2016–2019 Shelby GT350 & GT350R
Airaid 455-378 supplies an application-specific intake and dry filter for the vehicles listed below. Verify the complete engine/application combination and the current calibration and emissions requirements before ordering.
Key Features
- Manufacturer-listed dry filter: 705-462
- Application-specific intake components
- Original airflow sensor retained
- Use the GT350/GT350R application, not GT500 or a generic supercharged conversion. Ford identifies the original GT350 engine as naturally aspirated; the intake sheet’s supercharged heading is not repeated as a fitment claim.
Fitment
| Detail | Value |
|---|---|
| Application for 455-378 | 2016–2019 Ford Mustang Shelby GT350 and GT350R with 5.2L V8 |
| Installation distinction | Use the GT350/GT350R application, not GT500 or a generic supercharged conversion. Ford identifies the original GT350 engine as naturally aspirated; the intake sheet’s supercharged heading is not repeated as a fitment claim. |
| Calibration | The current manufacturer listing calls for custom ECU tuning for optimal results. Confirm the exact calibration with Airaid and your installer; no no-tune promise is made. |
Specifications
| Detail | Value |
|---|---|
| Brand | Airaid |
| Manufacturer part number | 455-378 |
| Product type | Performance air intake |
| Filter media | dry |
| Replacement filter | 705-462 |
| Condition | New |
| Emissions | The manufacturer excludes pollution-controlled vehicles in California; the instructions also identify states adopting California emissions procedures. Verify current application-specific restrictions before ordering. |
What’s Included
- Airaid 455-378 intake assembly
- One 705-462 filter
- Intake tube, airbox, filter and sensor adapters, couplers, vent fittings, edge trim, brackets and installation hardware
- Original sensors and vehicle parts specified for reuse are not new components supplied by this listing
About Airaid
Airaid offers intake systems, filters and intake components. Each kit has its own applications and service requirements; a shared brand does not establish compatibility.
Related Parts
- Browse Airaid parts — brand browsing only, not a compatibility recommendation. The replacement filter reference is 705-462.
FAQ
What is the 455-378?An Airaid vehicle-specific intake assembly with the manufacturer-listed dry filter.
Which vehicles are covered?2016–2019 Ford Mustang Shelby GT350 and GT350R with 5.2L V8. Match the engine and year, not just the model name.
Which filter does it use?The manufacturer identifies 705-462. Do not oil this dry-media element.
Does it include a replacement airflow sensor?No. The instructions call for transferring the original sensor; retain the specified vehicle components.
Can I assume no tuning is needed?The current manufacturer listing calls for custom ECU tuning for optimal results. Confirm the exact calibration with Airaid and your installer; no no-tune promise is made.
Is it street legal for every application?The manufacturer excludes pollution-controlled vehicles in California; the instructions also identify states adopting California emissions procedures. Verify current application-specific restrictions before ordering.
Is a fixed power or mileage gain guaranteed?No. Results vary with the vehicle, calibration and complete build. No fixed performance increase is promised.
Can I use service products for any filter?No. Match the cleaner and service procedure to the actual dry or oiled media; those procedures are not interchangeable.
Installation Instructions
- Read the exact shared instructions for 455-378 and verify the application and inventory.
- Follow ignition, battery and electronic-memory precautions before removing the factory intake.
- Use the GT350/GT350R application, not GT500 or a generic supercharged conversion. Ford identifies the original GT350 engine as naturally aspirated; the intake sheet’s supercharged heading is not repeated as a fitment claim.
- Assemble the supplied intake components in the illustrated order; reconnect sensors and vent lines. Inspect clearances and fasteners.
- Confirm calibration and emissions requirements before operation. Service the filter according to its actual media.
Manufacturer installation instructions. Current manufacturer requirements.
Prop 65 Warning
WARNING: Cancer and Reproductive Harm. See www.P65Warnings.ca.gov.
Air Intake Systems
Shop cold air intakes, short ram intakes, enclosed air boxes, intake tubes, mass air flow sensors, snorkels, scoops, silicone couplers, replacement filters, and intake service components at Black Ops Auto Works. This collection covers complete vehicle-specific intake systems and supporting components for performance cars, trucks, SUVs, Jeeps, diesel vehicles, off-road builds, and custom fabrication projects. Performance Air Intake Systems and Components An engine air intake system filters incoming air and delivers it to the throttle body, turbocharger, or supercharger inlet. Aftermarket systems may change the intake path, filter location, tubing size, air-box design, induction sound, and airflow characteristics. The results depend on the exact vehicle, engine calibration, intake design, installed modifications, and operating conditions. This collection includes products from Legmaker Intakes, aFe POWER, JLT, K&N, AIRAID, CORSA Performance, Injen, Spectre, Granatelli, Vibrant Per...
View Air Intake Systems Products
Airaid
Shop AIRAID cold air intakes, replacement air filters, PowerAid throttle-body spacers, and intake accessories at Black Ops Auto Works. Explore vehicle-specific intake systems, universal filters, pre-filters, and cleaning products for selected cars, trucks, SUVs, and diesel applications. Match each product to the exact engine, intake configuration, filter type, and manufacturer part number. AIRAID Cold Air Intake Systems Compare AIRAID intake systems for selected Chevrolet Camaro and Silverado, Cadillac CTS-V, Ford Mustang and F-150, Dodge Charger and Challenger, Chrysler 300, Toyota 4Runner, Tundra, and other applications. Confirm engine displacement, factory induction system, sensor arrangement, and connection requirements. Similar-looking kits can use different filters, tubes, couplers, and mounting hardware. AIRAID MXP and Jr. Intake Options Choose an intake package according to the factory components you intend to retain or replace. Compare MXP, Jr., and other listed systems by ...
View Airaid Products
Cold Air Intakes
Shop cold air intakes, short ram intakes, closed-airbox intake systems, replacement air filters, intake tubes, and MAF housings from K&N, AEM, aFe Power, Airaid, S&B Filters, Injen, Roush, Volant, Corsa, Mishimoto, HPS Performance, Cobb Tuning, JLT, Vararam, Steeda, and other performance intake brands. Find full open-element cold air intakes, sealed-airbox systems, dry and oiled air filters, replacement drop-in filter panels, MAF sensor housings, and complete intake tube kits. Cold air intakes for domestic muscle, sport-compact tuners, diesel trucks, off-road 4x4, Euro performance, and modern sport SUVs Mustang, Camaro, Challenger, Charger, F-150, Silverado, Ram, Tundra, Tacoma, 4Runner, Wrangler, Bronco, Cummins, Duramax, Power Stroke, WRX/STi, Civic Type R, GR86, Supra, GR Corolla, BMW M2/M3/M4, Golf R, and hundreds of additional platforms. Filter by vehicle, intake style (open element, closed airbox, short ram, tube kit), filter media (oiled cotton, dry synthetic), tun...
View Cold Air Intakes Products