Akrapovic 2021+ BMW G87 M2, G80 M3 & G82 M4 Octagonal Carbon Design Tail Pipe Set

Octagonal Carbon Design Tail Pipe Set for BMW M2 G87, M3 G80 and M4 G82

Complete your Akrapovic exhaust system with the precision-built Akrapovic TP-CT/69 Tail Pipe Set in Octagonal Carbon Design. Crafted from lightweight high-grade carbon fiber over a titanium structure, these octagonal-profile tips are purpose-engineered for the 2021-plus BMW G87 M2, G80 M3, and G82 M4. The TP-CT/69 delivers a ground-breaking angular silhouette that integrates seamlessly with the Akrapovic Slip-On Line or Evolution Line system, and works across the full range of G8x M car variants including Competition, Competition xDrive, CS, and CSL configurations.

Key Features

• Octagonal Carbon Fiber Profile - The TP-CT/69 uses a bold eight-sided shape crafted from high-grade carbon fiber, setting it apart from traditional round tailpipes and creating an unmistakably motorsport character at the rear.
• Titanium and Carbon Construction - Lightweight titanium structural core with a handcrafted carbon fiber outer sleeve balances heat resistance, structural rigidity, and minimal weight.
• Compatible Across Full G8x Range - One tail pipe set covers the BMW M2 (G87), M3 (G80), and M4 (G82, G83) in all trim levels including Competition, Competition xDrive, CS, and CSL.
• Required Companion Part - The TP-CT/69 must be ordered alongside the Akrapovic Slip-On Line (Titanium) for G8x models where a tail pipe set is mandatory.
• ECE Type-Approved - Meets European type-approval certification for street-legal use across all compatible G8x variants.
• Handcrafted in Slovenia - Individually assembled by Akrapovic craftsmen under the same standards as their championship exhaust systems.

This Part Fits

Specifications

What's Included

• 1 x Set of Octagonal Carbon Fiber Tail Pipes (Left and Right)
• Mounting hardware kit
• Official Akrapovic installation instructions

Frequently Asked Questions

Yes. The TP-CT/69 is a mandatory companion part when purchasing the Akrapovic Slip-On Line (Titanium) for the BMW G87 M2, G80 M3, and G82 M4. The tail pipe set completes the system and must be ordered separately.

The TP-CT/69 features the octagonal carbon design, while the TP-CT/68 uses a classic cylindrical carbon design. Both share the same titanium and carbon fiber materials and the same G8x fitment. The difference is purely the tip geometry and visual style.

Yes. The TP-CT/69 fits the full range of 2021-plus G80 M3 and G82 M4 variants, including Competition, Competition xDrive, CS, and CSL, as well as the G83 M4 Convertible Competition xDrive and G81 M3 Touring.

No. The TP-CT/69 is specifically designed to pair with Akrapovic exhaust systems for the G8x M cars. It is not sized for or compatible with the factory BMW exhaust outlets.

The TP-CT/69 carries ECE type approval for EU markets. As a cosmetic tail pipe component, it does not affect emissions or engine management, making it generally permissible for street use in the United States. Always verify with your local regulations.

The titanium inner pipe acts as the primary heat barrier between the exhaust gases and the carbon fiber outer sleeve. The outer sleeve is additionally finished with a high-temperature clear coat that provides supplementary heat resistance and preserves the gloss appearance.

The TP-CT/69 includes a complete set of four octagonal carbon tips, providing matched left and right pairs for the dual quad exhaust configuration of the G8x M cars when paired with an Akrapovic system.

Akrapovic covers the TP-CT/69 with a 2-year manufacturer warranty against defects in materials and workmanship, provided the product is installed and maintained in accordance with their guidelines.

Installation Instructions

1. Ensure the Akrapovic Slip-On Line or Evolution Line exhaust system is fully installed and completely cooled before fitting the TP-CT/69 tail pipe set.
2. Remove any protective packaging or temporary covers from the Akrapovic exhaust outlet pipes.
3. Slide the left and right octagonal carbon tip sleeves over their corresponding exhaust outlet pipes.
4. Adjust each tip for equal overhang, height symmetry, and octagonal orientation relative to the bumper cutouts.
5. Secure each tip with the supplied clamp or hardware, hand-tightening initially to allow final position adjustments.
6. Confirm symmetrical alignment and equal projection of both sides before applying final torque to all fasteners.
7. Run the engine to operating temperature and re-inspect all mounting points for security after initial heat cycle.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.