Click to zoom in
Titanium Intensity for the Facelifted Super-SUV: Akrapovic S-BM/T/35H Slip-On for BMW X5M and X6M
The Akrapovic S-BM/T/35H Slip-On Line titanium exhaust with carbon fiber tips is engineered specifically for the 2024 and later BMW X5 M, X5 M Competition (F95 LCI), X6 M, and X6 M Competition (F96 LCI) facelift models. This system replaces the factory muffler section with a Grade-1 titanium assembly, dramatically improving the exhaust character of the S68 4.4L twin-turbo V8 while shedding substantial mass from the SUV's rear. Carbon fiber tips are included for a premium factory-plus appearance that complements the facelifted X5M and X6M bodywork.
Key Features
- Slip-On Line titanium exhaust with carbon fiber tips for 2024+ BMW X5M, X5M Competition, X6M, and X6M Competition (F95/F96 LCI)
- Grade-1 titanium muffler construction for maximum weight reduction over the factory system
- Carbon fiber exhaust tips included for a premium visual upgrade matched to Akrapovic quality
- Engineered for the S68 4.4L twin-turbo V8 found in both the standard M and Competition variants
- Transforms the subdued factory exhaust note into a deep, authoritative V8 soundtrack
- Street-legal design retaining factory catalytic converter and OPF/GPF hardware
- Precision TIG-welded titanium construction to Akrapovic aerospace tolerances
- Compatible with BMW's active exhaust valve and Driving Dynamics Control modes
- Bolt-on muffler replacement for a straightforward professional shop installation
- Developed and validated specifically on the F95 LCI and F96 LCI facelift platform
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2024-2026 | BMW | X5 M | xDrive |
| 2024-2026 | BMW | X5 M | Competition |
| 2024-2026 | BMW | X6 M | xDrive |
| 2024-2026 | BMW | X6 M | Competition |
Specifications
| Detail | Value |
|---|---|
| Part Number (MPN) | S-BM/T/35H |
| System Type | Slip-On Line (Muffler Replacement) |
| Material | Grade-1 Titanium |
| Tip Type | Carbon Fiber (Included) |
| Compatible Engine | 4.4L Twin-Turbo V8 (S68) |
| BMW Platform | F95 LCI (X5 M Facelift) / F96 LCI (X6 M Facelift) |
| Emissions | Catalyst and OPF/GPF hardware retained |
| Brand | Akrapovic |
| Country of Manufacture | Slovenia |
| UPC | 3831126429119 |
What's Included
- Akrapovic S-BM/T/35H titanium slip-on muffler system
- Carbon fiber exhaust tips
- All required mounting hardware and clamps
- Akrapovic installation instructions
Frequently Asked Questions
Which BMW X5M and X6M models does the Akrapovic S-BM/T/35H fit?The S-BM/T/35H fits the 2024 and later BMW X5 M (F95 LCI facelift), X5 M Competition (F95 LCI facelift), X6 M (F96 LCI facelift), and X6 M Competition (F96 LCI facelift). It does not fit the pre-facelift F95/F96 (2020-2023) or the newer G05 X5 M platform if introduced separately.
Are carbon fiber tips included with the S-BM/T/35H?Yes. Unlike some Akrapovic systems where tips are sold separately, the S-BM/T/35H includes carbon fiber exhaust tips as part of the package, providing a complete visual and sound upgrade in a single purchase.
Does the S-BM/T/35H work with both the standard X5M and the X5M Competition?Yes. The S-BM/T/35H is confirmed for both the X5 M and X5 M Competition variants of the F95 LCI facelift, as well as the X6 M and X6 M Competition F96 LCI variants. All four variants use the same S68 4.4L twin-turbo V8 and share the same exhaust architecture at the muffler section where this system connects.
How does the slip-on design differ from a full cat-back exhaust on the X5M?The S-BM/T/35H replaces only the rear muffler section of the factory exhaust, leaving the mid-pipes, link pipes, and catalytic converters in place. This makes installation simpler and the modification more reversible, while still achieving meaningful weight savings and a significantly improved exhaust note. A full cat-back system would additionally replace the mid-pipes for greater exhaust flow, but the slip-on is the most popular choice for owners who want improved sound with minimal complexity.
Will the S-BM/T/35H change the sound in all BMW driving modes?The BMW X5 M and X6 M facelift feature an active exhaust system integrated with the Driving Dynamics Control modes. The Akrapovic S-BM/T/35H is designed to work with this factory system. Sport and Sport+ modes will produce more volume, while Comfort mode retains a more subdued character, though significantly improved over stock in all modes.
Is the S-BM/T/35H legal for road use in California?The S-BM/T/35H carries a Non-CARB designation, indicating it is not approved for public road use in California or other states that enforce CARB emissions regulations. Buyers in affected states should verify compliance with local laws before ordering.
Does the S-BM/T/35H require an ECU tune or software update?No ECU tune or software modification is required to install the S-BM/T/35H. As a muffler-section replacement that retains the factory catalyst and emissions hardware, the slip-on does not trigger changes in the BMW's engine management system.
How difficult is professional installation for the S-BM/T/35H?Installation is performed at the muffler section and involves standard exhaust work including disconnecting at the flange, removing rubber hangers, fitting the Akrapovic unit, and torqueing hardware to spec. A shop with an appropriate lift for the X5M or X6M's weight can complete installation efficiently. We strongly recommend professional installation given the vehicle's size and the importance of correct tip alignment and hanger seating.
What kind of sound does the S-BM/T/35H produce on the X5M and X6M?The S-BM/T/35H enhances the naturally deep V8 sound of the S68 engine with the distinctive Akrapovic titanium exhaust character, adding volume, resonance, and a higher-frequency overtone that the insulated factory exhaust suppresses. The result is a dramatically more engaging in-cabin and exterior exhaust experience without the antisocial harshness of cheaper aftermarket mufflers.
Installation Overview
- Allow the factory exhaust to cool completely before beginning work.
- Raise and securely support the X5M or X6M on a professional lift capable of supporting the vehicle's weight, with wheels chocked.
- Apply penetrating lubricant to all OEM muffler fasteners and rubber hangers and allow 15 minutes of soak time.
- Disconnect the factory muffler at the mid-pipe or link pipe flange and carefully note the gasket condition and mating surface.
- Release all rubber exhaust hangers and lower the factory muffler assembly from the vehicle.
- Clean the flange mating surface thoroughly and install the supplied gasket.
- Position the Akrapovic S-BM/T/35H and connect it to the mid-pipe or link pipe flange, hand-tightening the hardware only at this stage.
- Attach all rubber hangers to their mounting pegs and verify that the system hangs without contact with any chassis, suspension, or bodywork components.
- Install the carbon fiber tip assemblies per the included instructions before final fastener torque.
- Torque all connection hardware to the specifications in the Akrapovic installation sheet.
- Start the engine and check all joints for exhaust leaks. Re-torque after the first full heat cycle once the system has cooled.
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Akrapovic
Akrapovic Exhaust Systems and Carbon Accessories are stocked at Black Ops Auto Works for Porsche 911, BMW M, Audi RS, Ferrari, Lamborghini, McLaren, Mercedes-AMG, C8 Corvette, Nissan GT-R, and select performance motorcycle builds. Shop Slip-On Line titanium exhausts, Evolution Line exhausts, Race Line systems, cat-back systems, link pipes, downpipes, sound kits, carbon fiber tips, titanium tail pipe sets, rear diffusers, and carbon accessories for the correct vehicle and build goal. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 161 Akrapovic Exhaust Systems and Carbon Accessories SKUs across exhaust system layouts, titanium components, tail pipe designs, valve controls, and vehicle-specific platforms. What This Akrapovic Collection Covers Premium titanium exhaust engineering Akrapovic products pair vehicle-specific engineering with titanium construction, precision exhaust rout...
View Akrapovic Products
Carbon Fiber Parts & Accessories
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
Mufflers
Performance mufflers for street, track, and show builds are stocked at Black Ops Auto Works. Shop chambered mufflers, straight-through mufflers, tuned resonators, slip-on exhaust systems, and universal weld-in mufflers in stainless steel and titanium for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, Porsche, BMW, and import platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 434 muffler SKUs across inlet size, outlet configuration, and sound level categories. What This Category Covers The Mufflers collection spans direct-fit muffler replacements, universal weld-in mufflers for custom exhaust builds, and complete slip-on exhaust systems for European sports cars. The catalog is strongest on Gibson, Corsa, MagnaFlow, MBRP, and GReddy mufflers for domestic trucks and muscle cars, with premium Akrapovic titanium slip-on systems for Porsche, BMW, and Ferrari platform...
View Mufflers Products
Mufflers & Resonators
Mufflers and resonators for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop chambered mufflers, straight-through mufflers, turbo mufflers, muffler silencers, muffler delete pipes, standalone resonators, and slip-on exhaust systems for Mustang, Camaro, Challenger, Corvette, Wrangler, F-150, and import turbo platforms. Every product is filterable by inlet and outlet diameter, body size, overall length, and vehicle year, make, and model so the correct fitment ships the first time. Black Ops Auto Works carries 496 muffler and resonator SKUs across universal and direct-fit applications. What This Category Covers Mufflers and resonators are the sound-shaping heart of any exhaust system. A muffler controls overall volume and tone at the tailpipe, while a resonator upstream tames specific drone frequencies before they reach the cabin. Builders mix and match the two to dial in a sound profile that fits daily driving or track use. Muffler Types Chambered mufflers u...
View Mufflers & Resonators Products