Sold out
Click to zoom in
This AMS Performance 08-15 Mitsubishi EVO X Stainless Steel Brake Lines (4 Lines) is a vehicle-specific brake-system component for Mitsubishi Lancer Evolution. Confirm model year, trim, brake configuration, line count, connection points, and fluid requirements before installation. AMS stainless steel brake lines improve pedal feel, reduce the amount of time between applied pedal pressure and actual deceleration by reducing the expansion that is allowed by stock rubber lines.
Key Features
- Brake-system connection and line configuration are vehicle specific
- Professional installation and a complete leak and pedal check are required
- AMS stainless steel brake lines improve pedal feel, reduce the amount of time between applied pedal pressure and actual deceleration by reducing the expansion that is allowed by stock rubber lines.
Fitment
| Year | Make | Model | Trim |
|---|---|---|---|
| 2008-2015 | Mitsubishi | Lancer Evolution | X |
Specifications
| Brand | AMS Performance |
|---|---|
| Manufacturer Part Number | AMS.04.01.0004-1 |
| Product Type | Brake Line Kits |
| Condition | New |
| Configuration | 08-15 Mitsubishi EVO X Stainless Steel Brake Lines (4 Lines) |
What's Included
- The AMS Performance product identified by manufacturer part number AMS.04.01.0004-1
- Only components specifically listed by AMS for this exact configuration
Brand Information
AMS Performance develops application-specific performance systems and supporting components for turbocharged street and motorsport platforms. Exact fitment and system compatibility remain part-number specific.
Related Parts
Frequently Asked Questions
How do I confirm vehicle fitment?
Match the exact year, make, model, engine, drivetrain, and product configuration shown on this page. Contact Black Ops Auto Works before ordering when any required vehicle detail is uncertain.
What should be checked after installing brake lines?
Bleed the system with the specified fluid, inspect every connection for leaks, verify hose routing through full steering and suspension travel, and confirm a firm pedal before driving.
Can these lines be installed with the factory calipers?
Use only the exact vehicle and brake configuration listed for this part number. Confirm caliper, chassis, and line connection compatibility before ordering.
Installation Instructions
- Confirm the exact vehicle, part number, and complete system configuration before disassembly.
- Follow the current AMS instructions and all vehicle-manufacturer service procedures.
- After installation, inspect clearances, connections, fasteners, fluid or air leaks, and system operation before road use.
AMS Performance
Shop AMS Performance intercoolers, intakes, downpipes, fuel-system upgrades, drivetrain components, and supporting hardware by exact manufacturer part number. Match the complete year, make, model, engine, drivetrain, emissions configuration, and product-system requirements before ordering. AMS Intercoolers and Charge-Air Components AMS intercoolers, heat exchangers, charge pipes, and turbo inlet components are application specific. Confirm the core position, connection sizes, pipe configuration, sensor provisions, finish, and included hardware for the complete vehicle setup. AMS Intakes and Turbo System Parts Air intakes, airboxes, ducts, turbo inlet tubes, filters, and related components must match the engine, turbo configuration, sensor arrangement, and surrounding factory or aftermarket parts. Calibration requirements vary by application. AMS Exhaust and Fuel-System Upgrades Downpipes, flex-fuel components, fuel lines, pumps, rails, regulators, and supporting parts must be select...
View AMS Performance Products
Brake Line Kits
Brake line kits and stainless steel brake lines for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop front brake line kits, rear brake line kits, full vehicle brake line sets, braided stainless lines, DOT approved lines, banjo fitting lines, and vehicle specific replacement lines for Hellcat, Trackhawk, TRX, HEMI, Coyote, and import platforms from Rotora, Goodridge, ISR Performance, StopTech, and Black Ops Auto Works. Every brake line kit is filterable by year, make, model, trim, engine, and drivetrain so the correct length, fitting size, and routing ships the first time. Black Ops Auto Works carries 647 brake line kit SKUs across front, rear, and full vehicle categories. What This Collection Covers Brake lines carry pressurized brake fluid from the master cylinder and ABS module to each caliper. Factory rubber brake lines expand slightly under hard braking pressure, which creates a small amount of pedal sponginess. Stainless steel braided lin...
View Brake Line Kits Products
Brakes
Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...
View Brakes Products