The AC-HD1011CHCAM-TS is a precision-engineered carbon fiber hood for the 2010-2015 Camaro, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. Built from 3K 2x2 twill carbon fiber via a vacuum-infused wet layup, this OEM-style direct replacement hood uses your existing hinge bolts and factory mounting points for a true bolt-on swap. No cutting, no drilling, and no body modification required. The AC-HD1011CHCAM-TS is the right call when you want a hood that performs as well as it looks, whether that means shaving weight for a track day or stepping up the street presence of your build.
Key Features
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2010-2015 | Camaro | See title for trim details |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-HD1011CHCAM-TS |
| Brand | Anderson Composites |
| Material | 3K 2x2 twill carbon fiber |
| Construction Process | vacuum-infused wet layup |
| Surface Finish | marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish |
| Weight Savings | Up to 50% vs. OEM steel hood |
| Hood Style | Oem-Style Direct Replacement |
| Mounting | Direct bolt-on, uses OEM hinge hardware |
| Hood Pins | Required (not included) |
| Heat Shield | Transfer from OEM hood (required) |
What's Included
Brand Information
Anderson Composites manufactures application-specific carbon fiber, fiberglass, and composite exterior components for performance vehicles. Construction, finish, mounting, and vehicle compatibility remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Does this hood require drilling or cutting to install?
No. This hood is precision-molded from the factory panel and uses the existing hinge bolts and OEM mounting points. Minor bump stop adjustments are normal during final fitment, but no structural body modification is required.
Are hood pins required on a carbon fiber hood?
Yes, and Anderson Composites requires them. Carbon fiber hoods are significantly lighter than steel, which means aerodynamic lift at speed can overcome the factory latch. AeroCatch and Quic-Latch flush-mount systems are popular options that keep the look clean.
Can I reuse my OE gas struts?
No. Anderson Composites strongly advises against reinstalling OE gas struts or dampers on any composite hood. The pressure these shocks apply can crack the panel over time. Use a hood prop rod instead, and always close the hood carefully by hand.
Is a heat shield required?
Yes. Transfer the OEM heat shield to the new hood during installation. If the hood style prevents a direct transfer, an aftermarket universal heat shield is available at most performance retailers. Never run a carbon fiber hood without heat protection between the panel and the engine bay.
Installation Instructions
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shop Anderson Composites hoods, fenders, decklids, splitters, spoilers, diffusers and exterior trim at Black Ops Auto Works. Compare carbon-fiber and fiberglass components by exact vehicle application, body configuration, finish and manufacturer part number. A similar appearance does not establish compatibility with another trim, bumper or body width. Hoods, Fenders and Replacement Panels Identify the exact hood or panel design, construction and finished surfaces before ordering. Single-sided and double-sided carbon construction differ, and a visible carbon finish is a different choice from a panel intended for paint. Check hinge and latch arrangements, hood-pin requirements, vent clearance, heat shielding and any factory components that must transfer. Compare stated weights for the exact part rather than assuming every composite panel offers the same reduction. Splitters, Spoilers, Diffusers and Trim Match front aero to the installed bumper and rear components to the exhaust layout...
View Anderson Composites Products
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Find Chevrolet Camaro parts by generation, engine, body and installed equipment. Compare exhaust sound and system scope first, then plan brake, chassis or drivetrain service around the actual assemblies on the car. Choose the Exhaust Scope and Sound AWE Camaro SS listings distinguish axle-back, cat-back and conversion components, with Touring or Track editions, resonated or non-resonated choices and different outlet or tip configurations. Match the exact generation, engine, body and rear valance before comparing sound. An axle-back and a cat-back replace different sections. A conversion kit requires a compatible starting exhaust; review the part number, supplied sections, valve requirements and installation instructions rather than treating it as a complete system. Match Brakes, Body and Drivetrain Equipment Brake pads and rotors must suit the installed caliper, axle and rotor dimensions. Factory performance packages or later conversions can change the service application. Compare c...
View Chevrolet Camaro Parts & Accessories Products
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Aftermarket hoods for trucks, muscle cars, Jeeps, and sport compacts are stocked at Black Ops Auto Works. Shop carbon fiber hoods, fiberglass hoods, cowl hoods, vented hoods, power dome hoods, and OEM-style replacement hoods for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger Hellcat and Demon, Ram TRX, Chevrolet Camaro, Toyota Tacoma and 4Runner, and Cadillac Blackwing platforms. Every hood is filterable by year, make, model, trim, and material so the correct panel ships the first time. Black Ops Auto Works carries 512 hood SKUs across carbon fiber, fiberglass, and OEM-replacement categories. What This Category Covers An aftermarket hood is one of the most dramatic single-piece upgrades you can make to a vehicle exterior, instantly transforming the roofline and front-end presence. This collection covers carbon fiber hoods for weight savings, fiberglass hoods for aggressive styling and budget builds, and OEM-style replacement hoods for panel replacement after damage....
View Hoods Products
Hoods and hood components for Jeep Grand Cherokee Trackhawk, Dodge Charger and Challenger Hellcat and Demon, Durango SRT, Ram TRX, Chrysler 300, and Mustang and Camaro platforms are stocked at Black Ops Auto Works. Shop carbon fiber hoods, fiberglass hoods, OEM style replacement hoods, hood vents, hood scoops, hood pins, and hood struts built for HEMI, Hellcat, and supercharged applications. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 619 Hoods & Components SKUs across hood shell, vent, pin, and strut categories. What This Category Covers The Hoods & Components category groups together every part needed to replace, upgrade, or dress up a hood. Coverage spans full carbon fiber and fiberglass hood shells with styles like Demon, Sniper, Venom, and Redeye, OEM style Hellcat replacement hoods, functional and cosmetic hood vents, billet hood pin kits, and gas strut lift su...
View Hoods & Components Products
