-10%
Click to zoom in
The AC-FLS14CHCAM-Z28 accessory for the 2014-2015 Chevrolet Camaro is manufactured from 3K 2x2 twill carbon fiber using a vacuum-infused wet layup, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. Precision-molded from the OEM panel for an exact body line match, this part delivers up to 50% weight savings over the factory component and installs using existing OEM attachment points with no cutting, drilling, or modification required. Anderson Composites has set the benchmark for carbon fiber exterior components for over a decade, and the AC-FLS14CHCAM-Z28 reflects that heritage in construction, finish, and fitment accuracy.
Key Features
- Material: 3K 2x2 twill carbon fiber, vacuum-infused wet layup.
- Finish: marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish.
- Weight savings: up to 50% vs. OEM panel.
- Direct bolt-on installation using factory mounting points.
- Anderson Composites carbon fiber accessory (AC-FLS14CHCAM-Z28).
- Precision-molded from OEM part for exact fitment and body line accuracy.
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2014-2015 | Chevrolet | Camaro | See title for trim details |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-FLS14CHCAM-Z28 |
| Brand | Anderson Composites |
| Material | 3K 2x2 twill carbon fiber |
| Construction | vacuum-infused wet layup |
| Surface Finish | marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish |
| Weight Savings | Up to 50% vs. OEM panel |
| Mounting | Direct bolt-on, OEM hardware |
What's Included
- Anderson Composites carbon fiber accessory (AC-FLS14CHCAM-Z28)
- Mounting hardware (uses OEM attachment points)
Brand Information
Anderson Composites manufactures application-specific carbon fiber, fiberglass, and composite exterior components for performance vehicles. Construction, finish, mounting, and vehicle compatibility remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Does this require drilling or modification to install?
No. Anderson Composites molds every part from the OEM component so the mounting points are factory-exact. The accessory installs using existing attachment locations without permanent body modification.
What construction process does Anderson Composites use?
Anderson Composites uses a vacuum-infused 3K 2x2 twill carbon fiber wet layup. Resin is drawn evenly through the fiber mat under vacuum pressure, producing a consistent resin-to-fiber ratio without voids.
Can this part be painted?
Yes. Lightly sand the gel coat surface, apply a flexible composite primer, and finish with automotive basecoat and 2K clear coat.
Is this compatible with factory hardware?
Yes. Anderson Composites designs every part to work with OEM fasteners, clips, and mounting brackets. No specialty hardware is required for standard installation.
Installation Instructions
- Mask surrounding paint with tape or moving blankets to protect the existing finish
- Remove the factory accessory by releasing all OEM fasteners and clips
- Clean all mounting surfaces to remove adhesive residue and debris
- Test-fit the AC-FLS14CHCAM-Z28 to confirm alignment before final installation
- Secure using factory fasteners and any supplemental adhesive appropriate for the part type
- Inspect all gaps and body line continuity before driving
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Anderson Composites
Shop Anderson Composites hoods, fenders, decklids, splitters, spoilers, diffusers and exterior trim at Black Ops Auto Works. Compare carbon-fiber and fiberglass components by exact vehicle application, body configuration, finish and manufacturer part number. A similar appearance does not establish compatibility with another trim, bumper or body width. Hoods, Fenders and Replacement Panels Identify the exact hood or panel design, construction and finished surfaces before ordering. Single-sided and double-sided carbon construction differ, and a visible carbon finish is a different choice from a panel intended for paint. Check hinge and latch arrangements, hood-pin requirements, vent clearance, heat shielding and any factory components that must transfer. Compare stated weights for the exact part rather than assuming every composite panel offers the same reduction. Splitters, Spoilers, Diffusers and Trim Match front aero to the installed bumper and rear components to the exhaust layout...
View Anderson Composites Products
Carbon Fiber Parts & Accessories
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Chevrolet Camaro Parts & Accessories
Chevrolet Camaro parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, headers, cat-back exhaust systems, catch cans, brake pads, brake rotors, big brake kits, sway bars, springs, carbon fiber hoods, splitters, decklids, louvers, clutch kits, and carbon fiber driveshafts for the 4th Gen F-Body, 5th Gen, and 6th Gen Camaro, including SS, ZL1, LT1, and RS trims. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,570 Chevrolet Camaro SKUs across intake, exhaust, brakes, suspension, exterior, and drivetrain categories. What This Collection Covers The Camaro has run through four modern generations on the LS and LT engine families, plus the earlier F-Body cars shared with the Pontiac Firebird. This collection groups parts confirmed to fit the specific Camaro generation and trim so LS-swapped classics, LT1 6th Gen SS cars, and supercharge...
View Chevrolet Camaro Parts & Accessories Products