-10%
Click to zoom in
The AC-FBI15MU350 bumper for the 2015-2020 Ford Mustang GT350 is manufactured from 3K 2x2 twill carbon fiber using a vacuum-infused wet layup, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. Precision-molded from the OEM panel for an exact body line match, this part delivers up to 50% weight savings over the factory component and installs using existing OEM attachment points with no cutting, drilling, or modification required. Anderson Composites has set the benchmark for carbon fiber exterior components for over a decade, and the AC-FBI15MU350 reflects that heritage in construction, finish, and fitment accuracy.
Key Features
- Material: 3K 2x2 twill carbon fiber, vacuum-infused wet layup.
- Finish: marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish.
- Weight savings: up to 50% vs. OEM panel.
- Direct bolt-on installation using factory mounting points.
- Anderson Composites carbon fiber bumper (AC-FBI15MU350).
- Precision-molded from OEM part for exact fitment and body line accuracy.
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2015-2020 | Ford | Mustang | GT350 |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-FBI15MU350 |
| Brand | Anderson Composites |
| Material | 3K 2x2 twill carbon fiber |
| Construction | vacuum-infused wet layup |
| Surface Finish | marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish |
| Weight Savings | Up to 50% vs. OEM panel |
| Mounting | Direct bolt-on, OEM hardware |
What's Included
- Anderson Composites carbon fiber bumper (AC-FBI15MU350)
- Mounting hardware (uses OEM attachment points)
Brand Information
Anderson Composites manufactures application-specific carbon fiber, fiberglass, and composite exterior components for performance vehicles. Construction, finish, mounting, and vehicle compatibility remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Does this require drilling or modification to install?
No. Anderson Composites molds every part from the OEM component so the mounting points are factory-exact. The bumper installs using existing attachment locations without permanent body modification.
What construction process does Anderson Composites use?
Anderson Composites uses a vacuum-infused 3K 2x2 twill carbon fiber wet layup. Resin is drawn evenly through the fiber mat under vacuum pressure, producing a consistent resin-to-fiber ratio without voids.
Can this part be painted?
Yes. Lightly sand the gel coat surface, apply a flexible composite primer, and finish with automotive basecoat and 2K clear coat.
Is this compatible with factory hardware?
Yes. Anderson Composites designs every part to work with OEM fasteners, clips, and mounting brackets. No specialty hardware is required for standard installation.
Installation Instructions
- Mask surrounding paint with tape or moving blankets to protect the existing finish
- Remove the factory bumper by releasing all OEM fasteners and clips
- Clean all mounting surfaces to remove adhesive residue and debris
- Test-fit the AC-FBI15MU350 to confirm alignment before final installation
- Secure using factory fasteners and any supplemental adhesive appropriate for the part type
- Inspect all gaps and body line continuity before driving
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Anderson Composites
Shop Anderson Composites hoods, fenders, decklids, splitters, spoilers, diffusers and exterior trim at Black Ops Auto Works. Compare carbon-fiber and fiberglass components by exact vehicle application, body configuration, finish and manufacturer part number. A similar appearance does not establish compatibility with another trim, bumper or body width. Hoods, Fenders and Replacement Panels Identify the exact hood or panel design, construction and finished surfaces before ordering. Single-sided and double-sided carbon construction differ, and a visible carbon finish is a different choice from a panel intended for paint. Check hinge and latch arrangements, hood-pin requirements, vent clearance, heat shielding and any factory components that must transfer. Compare stated weights for the exact part rather than assuming every composite panel offers the same reduction. Splitters, Spoilers, Diffusers and Trim Match front aero to the installed bumper and rear components to the exhaust layout...
View Anderson Composites Products
Carbon Fiber Parts & Accessories
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Ford Mustang Parts & Accessories
Ford Mustang parts and accessories for every generation are stocked at Black Ops Auto Works. Shop cold air intakes, cat-back and axle-back exhaust systems, headers, coilovers, lowering springs, sway bars, brake pads, brake rotors, big brake kits, carbon fiber body parts, wheel spacers, fuel system components, and lighting upgrades for the Fox Body, SN95, New Edge, S197, and S550/S650 platforms, including EcoBoost, GT, Mach 1, Shelby GT350, Shelby GT500, and Dark Horse. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 2,101 Ford Mustang SKUs across suspension, brakes, exhaust, intake, exterior, and drivetrain categories. What This Collection Covers The Ford Mustang has run through six generations since 1964, and each one uses different suspension geometry, brake hardware, exhaust routing, and body dimensions. This collection groups parts confirmed to fit specific Mustang generatio...
View Ford Mustang Parts & Accessories Products