The AC-RSD15FDMU rear seat delete for the 2015-2023 Ford Mustang is manufactured from 3K 2x2 twill carbon fiber using a vacuum-infused wet layup, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. Precision-molded from the OEM panel for an exact body line match, this part delivers up to 50% weight savings over the factory component and installs using existing OEM attachment points with no cutting, drilling, or modification required. Anderson Composites has set the benchmark for carbon fiber exterior components for over a decade, and the AC-RSD15FDMU reflects that heritage in construction, finish, and fitment accuracy.
Key Features
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2015-2023 | Ford | Mustang | See title for trim details |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-RSD15FDMU |
| Brand | Anderson Composites |
| Material | 3K 2x2 twill carbon fiber |
| Construction | vacuum-infused wet layup |
| Surface Finish | marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish |
| Weight Savings | Up to 50% vs. OEM panel |
| Mounting | Direct bolt-on, OEM hardware |
What's Included
Brand Information
Anderson Composites manufactures application-specific carbon fiber, fiberglass, and composite exterior components for performance vehicles. Construction, finish, mounting, and vehicle compatibility remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Does this require drilling or modification to install?
No. Anderson Composites molds every part from the OEM component so the mounting points are factory-exact. The rear seat delete installs using existing attachment locations without permanent body modification.
What construction process does Anderson Composites use?
Anderson Composites uses a vacuum-infused 3K 2x2 twill carbon fiber wet layup. Resin is drawn evenly through the fiber mat under vacuum pressure, producing a consistent resin-to-fiber ratio without voids.
Can this part be painted?
Yes. Lightly sand the gel coat surface, apply a flexible composite primer, and finish with automotive basecoat and 2K clear coat.
Is this compatible with factory hardware?
Yes. Anderson Composites designs every part to work with OEM fasteners, clips, and mounting brackets. No specialty hardware is required for standard installation.
Installation Instructions
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shop Anderson Composites hoods, fenders, decklids, splitters, spoilers, diffusers and exterior trim at Black Ops Auto Works. Compare carbon-fiber and fiberglass components by exact vehicle application, body configuration, finish and manufacturer part number. A similar appearance does not establish compatibility with another trim, bumper or body width. Hoods, Fenders and Replacement Panels Identify the exact hood or panel design, construction and finished surfaces before ordering. Single-sided and double-sided carbon construction differ, and a visible carbon finish is a different choice from a panel intended for paint. Check hinge and latch arrangements, hood-pin requirements, vent clearance, heat shielding and any factory components that must transfer. Compare stated weights for the exact part rather than assuming every composite panel offers the same reduction. Splitters, Spoilers, Diffusers and Trim Match front aero to the installed bumper and rear components to the exhaust layout...
View Anderson Composites Products
Carbon fiber parts and accessories for Jeep Grand Cherokee, Trackhawk, Dodge Charger, Challenger, Durango, Chrysler 300, Ford Mustang, and Chevrolet Camaro and Corvette are stocked at Black Ops Auto Works. Shop carbon fiber hoods, front splitters, rear spoilers, diffusers, side skirts, mirror covers, headlight covers, badges, and interior trim for Hellcat, Trackhawk, Demon, SRT, and HEMI 6.2L and 6.4L platforms. Every part is filterable by year, make, model, trim, and engine so the correct fitment ships the first time. Black Ops Auto Works carries 2,338 carbon fiber SKUs across hoods, aero, and trim categories. What This Category Covers Carbon fiber parts combine weight reduction with aggressive styling for builds that want a performance look without sacrificing strength. This category spans full hood replacements, splitters and diffusers for aerodynamic upgrades, and smaller trim and badge pieces that finish off an interior or exterior refresh. Why Carbon Fiber Carbon fiber pan...
View Carbon Fiber Parts & Accessories Products
Find Ford Mustang exhaust and body accessories by generation, engine, body and installed exhaust equipment. Keep S550/S650, GT and Dark Horse applications explicit. Exhaust Configuration and Active Hardware Match Track, Touring or SwitchPath configuration to exact engine, body and manufacturer application. Compare tip layout and complete-system contents. A valve-motor bracket for an active-exhaust application is a supporting component, not a complete cat-back. Identify actual installed valve equipment and any previous exhaust changes. Generation-Specific Protection Match hood protectors to exact production range and panel or fascia application. Different Mustang body revisions should remain separate. Review installation instructions and the actual components supplied. Retain exact exhaust part references and conversion details for future service or configuration changes. Choose Your Part Record generation, engine and exact body. Identify active or other installed exhaust equipment....
View Ford Mustang Parts & Accessories Products
