-10%
Click to zoom in
The AC-FG17CHCAMZL grille for the 2017-2024 Chevrolet Camaro ZL1 1LE is manufactured from 3K 2x2 twill carbon fiber using a vacuum-infused wet layup, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. Precision-molded from the OEM panel for an exact body line match, this part delivers up to 50% weight savings over the factory component and installs using existing OEM attachment points with no cutting, drilling, or modification required. Anderson Composites has set the benchmark for carbon fiber exterior components for over a decade, and the AC-FG17CHCAMZL reflects that heritage in construction, finish, and fitment accuracy.
Key Features
- Material: 3K 2x2 twill carbon fiber, vacuum-infused wet layup.
- Finish: marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish.
- Weight savings: up to 50% vs. OEM panel.
- Direct bolt-on installation using factory mounting points.
- Anderson Composites carbon fiber grille (AC-FG17CHCAMZL).
- Precision-molded from OEM part for exact fitment and body line accuracy.
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2017-2024 | Chevrolet | Camaro | ZL1 1LE |
Specifications
| Detail | Value |
|---|---|
| Part Number | AC-FG17CHCAMZL |
| Brand | Anderson Composites |
| Material | 3K 2x2 twill carbon fiber |
| Construction | vacuum-infused wet layup |
| Surface Finish | marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish |
| Weight Savings | Up to 50% vs. OEM panel |
| Mounting | Direct bolt-on, OEM hardware |
What's Included
- Anderson Composites carbon fiber grille (AC-FG17CHCAMZL)
- Mounting hardware (uses OEM attachment points)
Brand Information
Anderson Composites manufactures application-specific carbon fiber, fiberglass, and composite exterior components for performance vehicles. Construction, finish, mounting, and vehicle compatibility remain manufacturer-part-number specific.
Related Parts
Frequently Asked Questions
Does this require drilling or modification to install?
No. Anderson Composites molds every part from the OEM component so the mounting points are factory-exact. The grille installs using existing attachment locations without permanent body modification.
What construction process does Anderson Composites use?
Anderson Composites uses a vacuum-infused 3K 2x2 twill carbon fiber wet layup. Resin is drawn evenly through the fiber mat under vacuum pressure, producing a consistent resin-to-fiber ratio without voids.
Can this part be painted?
Yes. Lightly sand the gel coat surface, apply a flexible composite primer, and finish with automotive basecoat and 2K clear coat.
Is this compatible with factory hardware?
Yes. Anderson Composites designs every part to work with OEM fasteners, clips, and mounting brackets. No specialty hardware is required for standard installation.
Installation Instructions
- Mask surrounding paint with tape or moving blankets to protect the existing finish
- Remove the factory grille by releasing all OEM fasteners and clips
- Clean all mounting surfaces to remove adhesive residue and debris
- Test-fit the AC-FG17CHCAMZL to confirm alignment before final installation
- Secure using factory fasteners and any supplemental adhesive appropriate for the part type
- Inspect all gaps and body line continuity before driving
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Anderson Composites
Shop Anderson Composites hoods, fenders, decklids, splitters, spoilers, diffusers and exterior trim at Black Ops Auto Works. Compare carbon-fiber and fiberglass components by exact vehicle application, body configuration, finish and manufacturer part number. A similar appearance does not establish compatibility with another trim, bumper or body width. Hoods, Fenders and Replacement Panels Identify the exact hood or panel design, construction and finished surfaces before ordering. Single-sided and double-sided carbon construction differ, and a visible carbon finish is a different choice from a panel intended for paint. Check hinge and latch arrangements, hood-pin requirements, vent clearance, heat shielding and any factory components that must transfer. Compare stated weights for the exact part rather than assuming every composite panel offers the same reduction. Splitters, Spoilers, Diffusers and Trim Match front aero to the installed bumper and rear components to the exhaust layout...
View Anderson Composites Products
Bumpers, Grilles & Guards
Bumpers, grilles, and grille guards for trucks and Jeeps are stocked at Black Ops Auto Works. Shop front and rear bumpers, brush guards, grille inserts, and winch-ready bumper systems built for Chevrolet Silverado, GMC Sierra, Ford F-150, RAM 1500 and RAM TRX, Toyota Tacoma, and Jeep Wrangler and Gladiator. Every bumper and grille guard is filterable by year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 989 bumper, grille, and guard SKUs across steel and aluminum construction, winch-ready mounts, and integrated light bar provisions. What This Category Covers This category includes front bumpers, rear bumpers, grille guards, brush guards, and replacement grille inserts for trucks and Jeeps. Options range from lightly modified factory-style bumpers to full off-road bumpers built for winches, light bars, and trail protection. Front Bumpers Front bumper replacements add clearance for larger tires, integrate winch mounting plates, an...
View Bumpers, Grilles & Guards Products
Chevrolet Camaro Parts & Accessories
Find Chevrolet Camaro parts by generation, engine, body and installed equipment. Compare exhaust sound and system scope first, then plan brake, chassis or drivetrain service around the actual assemblies on the car. Choose the Exhaust Scope and Sound AWE Camaro SS listings distinguish axle-back, cat-back and conversion components, with Touring or Track editions, resonated or non-resonated choices and different outlet or tip configurations. Match the exact generation, engine, body and rear valance before comparing sound. An axle-back and a cat-back replace different sections. A conversion kit requires a compatible starting exhaust; review the part number, supplied sections, valve requirements and installation instructions rather than treating it as a complete system. Match Brakes, Body and Drivetrain Equipment Brake pads and rotors must suit the installed caliper, axle and rotor dimensions. Factory performance packages or later conversions can change the service application. Compare c...
View Chevrolet Camaro Parts & Accessories Products
Grilles
Grilles parts and accessories are stocked at Black Ops Auto Works. Aftermarket grilles for Silverado, F-150, Ram, Tacoma, Wrangler, Mustang, Camaro, Corvette, Charger, BMW M, Subaru WRX and Cadillac performance builds are stocked at Black Ops Auto Works. Shop replacement grilles, grille inserts, mesh panels, billet patterns, carbon fiber trim, overlays, bezels and front end accessories. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 79 Grilles SKUs across trusted aftermarket brands and vehicle applications. What This Grilles Collection Covers Vehicle Specific Parts A grille upgrade changes the front end appearance while protecting the radiator opening and supporting factory lighting, cameras, sensors and shutters where equipped. Product listings identify direct replacement, insert and overlay designs. Replacement Grilles and Inserts Details That Matter Replacement grilles exchan...
View Grilles Products