Click to zoom in
This ARB vehicle-protection component is the 2024+ Toyota Tacoma Front Skid Plate for 2024-2026 Toyota Tacoma. Confirm body style, trim, chassis and bumper configuration, sensors, cameras, recovery equipment, mounting points, finish, and all stated exclusions.
Key Features
- Vehicle-specific protection and mounting geometry
- Sensor, camera, recovery, clearance, finish, and hardware requirements are configuration specific
- Keep Rocks and Trail Debris Off Your Tacoma's Underbody The front end of a 2024 and newer Toyota Tacoma takes the first hit from rocks, stumps, and ice chunks on the trail.
- ARB's front skid plate, part number 5423060, is a pressed and folded steel plate that bolts directly to the frame to shield the radiator, front differential, and oil sump without adding meaningful ground clearance loss.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2024-2026 | Toyota | Tacoma | Limited |
| 2024-2026 | Toyota | Tacoma | TRD Off-Road |
| 2024-2026 | Toyota | Tacoma | TRD PreRunner |
| 2024-2026 | Toyota | Tacoma | TRD Sport |
| 2024-2026 | Toyota | Tacoma | Trailhunter |
Specifications
| Brand | ARB |
|---|---|
| Manufacturer Part Number | 5423060 |
| Product Type | Skid Plates |
| Condition | New |
| Configuration | 2024+ Toyota Tacoma Front Skid Plate |
| Detail | Value |
| Material | 3mm pressed and folded steel |
| Finish | Zinc plated, textured grey powder coat |
| Coverage | Front skid plate only |
| Bumper Compatibility | OE and ARB bumpers |
| Warranty | 3 year |
What's Included
One new ARB skid plate in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.
About ARB
ARB develops vehicle-specific four-wheel-drive equipment, including protection, suspension, Air Lockers, compressed-air systems, racks, recovery equipment, lighting, and touring accessories. Every application, load rating, interface, and included component remains exact-part specific.
Important Disclosures
- California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.
Related Parts
- Shop all ARB products
- ARB Under Vehicle Protection Tacoma 05 On Or 16On
- ARB 16-23 Toyota Tacoma Summit MKII Bumper Kit w/ LED Fog Lights & Winch Install Kit - Black
- ARB 2018+ Jeep Wrangler JL Summit MKII Bumper Kit
Frequently Asked Questions
Will this fit 2024-2026 Toyota Tacoma with factory sensors and cameras?
Compatibility depends on the exact trim, bumper, sensor, camera, radar, recovery, and lighting configuration. Confirm every application note before disassembly.
Is every bull bar or bumper rated as a recovery point?
No. Use only recovery points and towing locations expressly rated for that purpose. A bumper or protection bar does not automatically establish a recovery rating.
Will installation require drilling, trimming, or calibration?
Requirements vary by exact vehicle and component. Review the current ARB instructions and account for sensors, cameras, wiring, bodywork, and driver-assistance calibration.
Installation Instructions
- Confirm ARB part number 5423060, the complete application, and every required supporting component before beginning work.
- Protect bodywork and wiring, account for sensors and cameras, and dry-fit every bracket before drilling, trimming, or tightening hardware.
- Torque all mounts, verify clearance and driver-assistance functions, aim lights if fitted, and recheck hardware after the initial drive.
ARB
Shop ARB 4x4 equipment by exact manufacturer part number, vehicle application, axle, rack platform, compressor requirement, and recovery rating. This collection includes Air Lockers, bumpers, underbody protection, BASE Rack components, air systems, recovery equipment, lighting, camping gear, and service parts for off-road and overland builds. ARB Air Lockers and Drivetrain Parts ARB Air Lockers provide selectable differential lock for supported axle applications. Confirm the axle model, spline count, carrier break, gear ratio, compressor requirement, and every application note before ordering. Differential covers, switches, solenoids, air lines, and service components must match the installed locker system. Bumpers and Vehicle Protection Vehicle-specific bumpers, winch bars, skid plates, rock protection, and mounting systems depend on the complete year, make, model, trim, body configuration, sensors, cameras, and factory equipment. Review the fitment table and included hardware for ...
View ARB Products
Body Armor & Protection
Body armor and protection for trucks and Jeeps is stocked at Black Ops Auto Works. Shop rock sliders, skid plates, fender flares, and underbody protection built for Chevrolet Colorado, RAM 1500 TRX, Toyota Tundra and Tacoma, and Jeep Gladiator. These parts guard the frame, fuel tank, transfer case, and rocker panels from rock strikes, brush, and trail debris. Black Ops Auto Works carries 957 body armor SKUs, all filterable by year, make, model, and trim to confirm correct fitment. What This Category Covers Body armor and protection includes rock sliders, skid plates, differential covers, fender flares, and rocker panel guards designed to shield the underside and lower body of a truck or Jeep during off-road driving. This category ranges from bolt-on rock sliders to full underbody skid plate systems. Rock Sliders and Rock Rails Rock sliders bolt or weld to the frame rails beneath the doors, protecting rocker panels from rock strikes while also serving as a step for entry and exit...
View Body Armor & Protection Products
Exterior Parts & Accessories
Shop exterior parts and accessories for cars, trucks, Jeeps, and SUVs at Black Ops Auto Works. Explore carbon-fiber hoods, front lips, splitters, spoilers, diffusers, fender flares, truck steps, bed accessories, and exterior trim. Whether you are updating a performance vehicle’s appearance or adding everyday utility to a pickup, choose components matched to your exact vehicle and existing equipment. Carbon-Fiber Hoods and Body Panels Explore Black Ops Auto Works hood designs and selected replacement panels for Jeep Grand Cherokee, Dodge Charger, Dodge Durango, Chrysler 300, and other listed applications. Featured designs include Demon, Sniper, Redeye, and CFR options for supported vehicle configurations. Compare the construction, finish, mounting requirements, and supplied components on each listing. A carbon-fiber appearance does not establish that every product uses the same material or manufacturing method. Browse our Black Ops Carbon Fiber collection for focused shopping. Front ...
View Exterior Parts & Accessories Products
Skid Plates
Skid Plates parts and accessories are stocked at Black Ops Auto Works. Skid plates for Jeep Wrangler, Gladiator, Toyota Tacoma, Land Cruiser, 4Runner, Ford Bronco, F-150, Colorado, Canyon and Ram trucks are stocked at Black Ops Auto Works. Shop engine, transmission, front differential, transfer case, belly and fuel tank protection in steel and aluminum. Every product is filterable by year, make, model, trim, engine and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 80 Skid Plates SKUs across trusted aftermarket brands and vehicle applications. What This Skid Plates Collection Covers Vehicle Specific Parts Vehicle specific skid plates protect vulnerable drivetrain and underbody components from rocks, ruts, debris and trail obstacles. Properly designed protection uses existing mounting points while preserving service access and drainage. Engine and Differential Protection Details That Matter Front and engine skid plates shield the oil pan, steeri...
View Skid Plates Products