Click to zoom in
This ARB vehicle-protection component is the Bumper Fitting Kit for Summit MKII Bull Bar on 2024-2026 Toyota Tacoma for 2024-2026 Toyota Tacoma. Confirm body style, trim, chassis and bumper configuration, sensors, cameras, recovery equipment, mounting points, finish, and all stated exclusions.
Key Features
- Vehicle-specific protection and mounting geometry
- Sensor, camera, recovery, clearance, finish, and hardware requirements are configuration specific
- Chassis Hardware That Locks the Summit MKII Bull Bar to the Tacoma Frame An ARB bull bar only carries load correctly when it is tied to the frame with the brackets engineered for that truck.
- It supplies only the brackets and hardware that attach a separately purchased ARB Summit MKII bull bar to the truck.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2024-2026 | Toyota | Tacoma | Verify engine and trim |
Specifications
| Brand | ARB |
|---|---|
| Manufacturer Part Number | 6178569 |
| Product Type | Brackets |
| Condition | New |
| Configuration | Bumper Fitting Kit for Summit MKII Bull Bar on 2024-2026 Toyota Tacoma |
| Detail | Value |
| Material | Steel |
| Color | Black |
| Fitment | Vehicle specific |
What's Included
One new ARB bracket in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.
About ARB
ARB develops vehicle-specific four-wheel-drive equipment, including protection, suspension, Air Lockers, compressed-air systems, racks, recovery equipment, lighting, and touring accessories. Every application, load rating, interface, and included component remains exact-part specific.
Important Disclosures
- California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.
Related Parts
- Shop all ARB products
- ARB Bumper Mounting Kit for 3423020
- ARB Bumper Mounting Kit for 3423030
- ARB Bumper Mounting Kit for 3423040
Frequently Asked Questions
Will this fit 2024-2026 Toyota Tacoma with factory sensors and cameras?
Compatibility depends on the exact trim, bumper, sensor, camera, radar, recovery, and lighting configuration. Confirm every application note before disassembly.
Is every bull bar or bumper rated as a recovery point?
No. Use only recovery points and towing locations expressly rated for that purpose. A bumper or protection bar does not automatically establish a recovery rating.
Will installation require drilling, trimming, or calibration?
Requirements vary by exact vehicle and component. Review the current ARB instructions and account for sensors, cameras, wiring, bodywork, and driver-assistance calibration.
Installation Instructions
- Confirm ARB part number 6178569, the complete application, and every required supporting component before beginning work.
- Protect bodywork and wiring, account for sensors and cameras, and dry-fit every bracket before drilling, trimming, or tightening hardware.
- Torque all mounts, verify clearance and driver-assistance functions, aim lights if fitted, and recheck hardware after the initial drive.
ARB
Shop ARB 4x4 equipment by exact manufacturer part number, vehicle application, axle, rack platform, compressor requirement, and recovery rating. This collection includes Air Lockers, bumpers, underbody protection, BASE Rack components, air systems, recovery equipment, lighting, camping gear, and service parts for off-road and overland builds. ARB Air Lockers and Drivetrain Parts ARB Air Lockers provide selectable differential lock for supported axle applications. Confirm the axle model, spline count, carrier break, gear ratio, compressor requirement, and every application note before ordering. Differential covers, switches, solenoids, air lines, and service components must match the installed locker system. Bumpers and Vehicle Protection Vehicle-specific bumpers, winch bars, skid plates, rock protection, and mounting systems depend on the complete year, make, model, trim, body configuration, sensors, cameras, and factory equipment. Review the fitment table and included hardware for ...
View ARB Products
Brackets
Brackets and mounting hardware for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop bumper mounting brackets, light bar and sensor relocation brackets, exhaust hanger kits, leaf spring and track bar brackets, caliper brackets, and roof rack mounting brackets for Ford, RAM, Chevrolet, Jeep, Subaru, and Toyota platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 472 bracket SKUs across bumper, suspension, exhaust, and accessory mounting categories. What This Category Covers Brackets are the mounting hardware that secures bumpers, light bars, sensors, exhaust systems, suspension components, and roof accessories to a vehicle chassis or body. Because brackets support such a wide range of systems, this collection spans multiple vehicle platforms and use cases rather than a single category, from off-road bumper hardware to exhaust hanger kits to suspen...
View Brackets Products
Fabrication
Shop automotive fabrication parts, tubing, fittings, hoses, clamps, and welding supplies at Black Ops Auto Works. Find components for custom exhaust routing, intake plumbing, fuel and oil lines, mounting solutions, and heat protection. Compare materials and hardware from Vibrant Performance, Stainless Bros, Ticon Industries, Radium Engineering, Mishimoto, Kooks, and other brands by exact dimensions and intended application. Stainless Steel, Aluminum, and Titanium Tubing Choose tubing, bends, and fabrication sections for your project’s routing and material requirements. This collection includes steel, aluminum, and titanium tubing categories, with selected T304 and SS321 stainless products. Compare outside diameter, wall thickness, straight length, bend angle, and centerline radius before planning cuts and joints. Explore the Stainless Bros collection for additional stainless tubing, mandrel bends, pie cuts, flanges, and exhaust fabrication components. Exhaust Flanges, Clamps, and Sl...
View Fabrication Products