Size Chart
×
Old Man Emu 4000 is a matched front coil spring set for supported 2016-current Toyota Tacoma applications carrying approximately 0-110 pounds of constant front accessory load. The micro-alloyed steel springs use a 588-pound-per-inch rate and are engineered to work with the specified Old Man Emu MT64 or Nitrocharger Plus dampers.
Key Features
Fitment
Fits supported 2016-current Toyota Tacoma applications requiring the 4000 light-load front spring set. Confirm model year, suspension configuration, constant accessory weight, target ride height, damper selection, left- and right-hand-drive requirements, and the current ARB application guide before ordering.
Specifications
| Brand | Old Man Emu |
|---|---|
| Manufacturer Part Number | 4000 |
| Manufacturer Part Number | 4000 |
| EAN | 9332018098979 |
| Position | Front |
| Quantity | Two coil springs |
| Spring Rate | 588 pounds per inch |
| Free Height | 15 inches each |
| Bar Diameter | 0.7 inch |
| Turns | 9 |
| Finish | Matte black |
| UPC or GTIN | 9332018098979 |
What's Included
One matched pair of Old Man Emu 4000 front coil springs with the coil isolators supplied for this exact part number. Struts, shocks, upper control arms, trim packers, rear suspension parts, and installation tools are not included unless expressly shown by ARB.
About Old Man Emu
Old Man Emu manufactures automotive performance and replacement components. Match the exact manufacturer part number and published application details before installation.
Related Old Man Emu Products
Frequently Asked Questions
How much constant front load is Old Man Emu 4000 designed for?
The current Tacoma application guide places this spring in the light-load range of approximately 0-110 pounds of constant front accessory weight.
Are Old Man Emu 4000 springs sold as a pair?
Yes. ARB identifies 4000 as a front coil spring set and supplies a matched pair.
Can these springs be used with factory dampers?
Use only a damper combination approved in the current ARB application guide. ARB identifies compatible MT64 and Nitrocharger Plus dampers for this spring family.
Installation Instructions
Installation should be completed by a qualified technician using the current manufacturer instructions. Verify the vehicle or system application, inspect every supplied component, follow the specified fastener and torque procedures, check clearances and routing, and confirm safe operation before driving.
Shop coilover springs, replacement coilover coils, ID60 and ID65 sport springs, ERS race springs, QA1 high-travel coilover springs, off-road lift coils, and Jeep coilover replacement springs from Eibach, Swift Springs, Hyperco, QA1, H&R, Vogtland, KW, Ground Control, Rock Krawler, RockJock, ARB / Old Man Emu, and other coilover-spring specialists. Find coilover springs for street/track sport-compact and European coilover platforms (ID60, ID62, ID65, ID70, 2.25 inch, 2.5 inch), race-application ERS springs, off-road lift coils for Wrangler JK/JL/Gladiator/JT/JKU, ARB / OME Toyota Land Cruiser and 4Runner replacement coils, RockJock lift springs, and QA1 high-travel muscle-car coilover coils. Coilover springs are the replaceable coils that wrap the shock body inside a coilover assembly. Swapping the spring changes ride height, spring rate, and the balance between comfort and cornering support without buying a new coilover. Filter by inner diameter (ID), free length, spring rate...
View Coilover Springs Products
Coilovers and coilover components are stocked at Black Ops Auto Works for trucks, SUVs, muscle cars, and street performance builds. Shop complete coilover kits, coilover springs, lowering springs, shock boots, dampening adjustment extenders, and suspension hardware for Ford, Toyota, Chevrolet, Jeep, Dodge, and Porsche platforms. Every product is filterable by year, make, model, trim, and drivetrain so the correct coilover setup ships the first time. Black Ops Auto Works carries 2,259 coilover and component SKUs across street, off-road, and track categories. What This Collection Covers Coilovers combine a coil spring and a shock absorber into a single adjustable unit, giving control over ride height and, on many models, damping stiffness. This collection also includes the individual components used to service, upgrade, or protect an existing coilover system. Product Categories Complete coilover kits, individual coilover shocks, coilover springs, lowering springs, protective shock...
View Coilovers & Components Products
Shop Old Man Emu suspension components at Black Ops Auto Works for a chassis refresh or a coordinated truck and SUV project. Compare MT64, Nitrocharger Plus and BP-51 references, then review coil springs, leaf springs, control arms and installation hardware. Choose the complete specification for your vehicle, existing equipment and actual operating load.MT64, Nitrocharger Plus and BP-51 ChoicesThe selection includes MT64 strut, shock and coilover references, Nitrocharger Plus front or rear applications and BP-51 components or fit kits. Match the exact chassis and axle position before comparing product specifications. Some MT64 Tacoma references distinguish left and right, so confirm mounting side and supplied quantity for the chosen part.Coil and Leaf Springs for the Actual SetupCoil and leaf-spring listings identify different vehicles, axle positions and medium or heavy-load references. Choose using the manufacturer’s specified application and the weight of the equipment the vehicl...
View Old Man Emu Products
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
Shop Toyota Tacoma parts for suspension projects, body protection, bed access and everyday maintenance at Black Ops Auto Works. Explore Fox, ICON and Old Man Emu references, bumper components, bed covers and cab-specific steps. Coordinate the complete order around your generation, powertrain, drivetrain, cab and bed.Suspension Across Tacoma GenerationsFox, Bilstein, ICON and OME references span different generations, axle positions and staged configurations. Match factory suspension, drivetrain and current ride height before comparing individual dampers, coilovers or complete systems. Extended-travel and load-specific references require their full supporting setup and installation plan reviewed.Body Protection, Steps and Bed EquipmentBumper, skid, recovery-point and running-board references serve different mounting positions and cab types. Bed toppers, covers and rack frames require exact bed and rail coverage. A topper listed as Box 1 with Box 2 required, or a rack frame requiring ...
View Toyota Tacoma Parts and Accessories Products