Size Chart
×
Old Man Emu MT64601013L is the left rear MT64 monotube shock for supported 2005-2023 Toyota Tacoma applications. It is tuned for overland and load-carrying use with a 2.8-inch aluminum body, digressive valving, and a vehicle-specific left-side configuration that must be paired with the corresponding right shock.
Key Features
Fitment
Fits the left rear position on supported 2005-2023 Toyota Tacoma models. Confirm suspension configuration, vehicle load, intended ride height, left-side position, matching right-side shock, spring selection, mount type, and every current ARB application note before ordering.
Specifications
| Brand | Old Man Emu |
|---|---|
| Manufacturer Part Number | MT64601013L |
| Manufacturer Part Number | MT64601013L |
| EAN | 9332018106940 |
| Position | Left rear |
| Extended Length | 600 mm |
| Compressed Length | 392 mm |
| Upper Mount | Pin |
| Lower Mount | Eye |
| Upper Bush Kit | VM50010005SP |
| Lower Bush Kit | VD50020001SP |
| UPC or GTIN | 9332018106940 |
What's Included
One Old Man Emu MT64601013L left rear MT64 shock absorber with the bushings and fitting components supplied for this exact part number. The matching right shock, springs, upper control arms, and unrelated suspension hardware are not included unless expressly shown.
About Old Man Emu
Old Man Emu manufactures automotive performance and replacement components. Match the exact manufacturer part number and published application details before installation.
Related Old Man Emu Products
Frequently Asked Questions
Is MT64601013L sold as a pair?
No. This listing is for the left rear shock only. Order the corresponding right-side shock required by the current ARB application guide.
What are the extended and compressed lengths?
ARB lists a 600 mm extended length and 392 mm compressed length for MT64601013L.
Is this shock adjustable?
It uses vehicle-specific digressive valving and is not listed as an externally adjustable remote-reservoir shock.
Installation Instructions
Installation should be completed by a qualified technician using the current manufacturer instructions. Verify the vehicle or system application, inspect every supplied component, follow the specified fastener and torque procedures, check clearances and routing, and confirm safe operation before driving.
Shop Old Man Emu suspension components at Black Ops Auto Works for a chassis refresh or a coordinated truck and SUV project. Compare MT64, Nitrocharger Plus and BP-51 references, then review coil springs, leaf springs, control arms and installation hardware. Choose the complete specification for your vehicle, existing equipment and actual operating load.MT64, Nitrocharger Plus and BP-51 ChoicesThe selection includes MT64 strut, shock and coilover references, Nitrocharger Plus front or rear applications and BP-51 components or fit kits. Match the exact chassis and axle position before comparing product specifications. Some MT64 Tacoma references distinguish left and right, so confirm mounting side and supplied quantity for the chosen part.Coil and Leaf Springs for the Actual SetupCoil and leaf-spring listings identify different vehicles, axle positions and medium or heavy-load references. Choose using the manufacturer’s specified application and the weight of the equipment the vehicl...
View Old Man Emu Products
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
Shop Toyota Tacoma parts for suspension projects, body protection, bed access and everyday maintenance at Black Ops Auto Works. Explore Fox, ICON and Old Man Emu references, bumper components, bed covers and cab-specific steps. Coordinate the complete order around your generation, powertrain, drivetrain, cab and bed.Suspension Across Tacoma GenerationsFox, Bilstein, ICON and OME references span different generations, axle positions and staged configurations. Match factory suspension, drivetrain and current ride height before comparing individual dampers, coilovers or complete systems. Extended-travel and load-specific references require their full supporting setup and installation plan reviewed.Body Protection, Steps and Bed EquipmentBumper, skid, recovery-point and running-board references serve different mounting positions and cab types. Bed toppers, covers and rack frames require exact bed and rail coverage. A topper listed as Box 1 with Box 2 required, or a rack frame requiring ...
View Toyota Tacoma Parts and Accessories Products