Sold out
Click to zoom in
SKU: 400-0313 | UPC: 672036044824
ARP All Carter OE/Carter/Edelbrock (Performer and Thunder Series) Carburetor Bolt Kit
Secure your carburetor to the intake manifold with this ARP bolt kit designed for all Carter OE series, Carter series, Edelbrock Performer series (600-800 CFM AVS2 and 1400-800 CFM), and Thunder series (650-800 CFM AVS and 750-850 CFM) carburetors. These bolts fit standard 4-bolt patterns on small block Chevy, big block Chevy, Ford Windsor, and other V8 engines. High-strength construction resists vibration and maintains clamp load under high-rpm conditions for consistent fuel delivery.
Key Features
- 8740 Chromoly Steel: Forged alloy heat treated to 200,000 psi tensile strength handles extreme loads
- Thread Rolling Process: Boosts fatigue resistance and ensures accurate thread engagement
- Hex Washer Head Design: 1/2-inch socket compatible for quick torquing to spec
- Black Oxide Finish: Shields against rust and corrosion in engine bays
- Complete 4-Bolt Kit: Includes (4) 5/16-18 x 1.000-inch bolts for direct replacement
Product Notes
- Confirm carburetor base flange matches 4-bolt square bore pattern
- Torque bolts to 25-30 ft-lbs using ARP moly lube for best results
- Packaged to prevent damage during transit
Installation Notes
- Professional installation recommended.
- Degrease manifold and carb base surfaces for flat mating
- Compatible with ARP 234-1103 thread lube or equivalent
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1967-1981 | Chevrolet | Camaro | All |
| 1955-1981 | Chevrolet | Bel Air | All |
| 1964-1982 | Chevrolet | Corvette | All |
| 1965-1991 | Chevrolet | Impala | All |
| 1965-1973 | Ford | Mustang | All |
| 1955-1995 | Chevrolet | Small Block Engines | 262-400 |
| 1965-1996 | Chevrolet | Big Block Engines | 396-454 |
| 1962-1997 | Ford | Small Block Engines | 260-351W |
Why Choose ARP?
- Decades of leadership in performance fasteners for drag racing and street
- Strength far beyond factory hardware for repeated heat cycles
- USA-made with exact tolerances for zero slop
Frequently Asked Questions
-
Q: Which carburetors does this kit fit?
A: Fits all Carter OE series, Carter series, Edelbrock Performer series AVS2 600-800 CFM and 1400-800 CFM, Thunder series AVS 650-800 CFM and 750-850 CFM -
Q: What material and thread specs?
A: 8740 chromoly steel bolts, 5/16-18 thread x 1.000-inch length, rated 200,000 psi -
Q: What warranty applies?
A: Limited lifetime warranty covers defects in materials and workmanship when installed and used properly
Shipping & Handling
- Method: UPS Ground
- Availability: In stock - ships same or next business day
- Packaging: Protective box 6 x 4 x 1 inches
- Weight: 0.25 lbs
ARP Head Studs
ARP head stud kits for internal engine builds are stocked at Black Ops Auto Works. Shop ARP head stud and bolt kits, main stud kits, and rod bolt kits engineered for HEMI, Ford Modular and Coyote, GM LS, Subaru EJ, Honda K and B series, VW/Audi turbo four cylinders, Porsche, BMC, and Renault engines, along with the Ultra-Torque assembly lubricant every kit depends on. Every product is filterable by year, make, model, and engine platform so the correct fastener kit ships the first time. Black Ops Auto Works carries 812 ARP Head Studs SKUs across 8740 chromoly and ARP2000 alloy options. What This Collection Covers ARP head studs replace factory head bolts with precision-machined threaded studs that thread into the block and allow the nut to be torqued concentrically on a stationary fastener, producing more even and repeatable clamping force across the entire head gasket surface than a factory head bolt design. This collection focuses on the internal engine fasteners that hold the ...
View ARP Head Studs Products
Head Components
Cylinder head components and engine internals for performance builds and OE service are stocked at Black Ops Auto Works. Shop complete cylinder heads, head gaskets, head stud and bolt kits, rocker arms, lifters, camshaft and lifter kits, rotating assemblies, and main stud and bolt kits for LS, LT, HEMI 5.7/6.1/6.4, Coyote, Cummins, Powerstroke, VW/Audi turbo, Subaru, Nissan, and import platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 972 Head Components SKUs across component type, engine platform, and bore or gasket specification. What This Collection Covers Head Components groups together the parts that live at and around the cylinder head, the area of the engine most affected by heat, combustion pressure, and clamping load. This includes complete heads, head gaskets, head studs and bolts, rocker arms, lifters, camshaft and lifter kits, main stud and bolt kits, and ro...
View Head Components Products
Main Stud & Bolt Kits
Main stud kits, main bolt kits and engine bottom end fasteners for performance engine builds are stocked at Black Ops Auto Works. Shop ARP main studs, main cap bolts, block bolts, main cap hardware, fastener lubricant and build hardware for LS, Coyote, Hemi, K20, K24, 2JZ, RB, EJ, SBC, BBC, 4B11 and modular Ford engine combinations. Every product is filterable by engine family, year, make, model and application so the correct main cap configuration, thread pitch, fastener length and oil pan clearance can be confirmed before ordering. Black Ops Auto Works carries 84 main stud and bolt kit SKUs for street, boosted, stroker and competition engine builds. What This Main Stud & Bolt Kits Collection Covers Main studs and bolts secure the main caps that support the crankshaft. They are critical engine fasteners because cap movement or inconsistent clamp load can affect bearing clearance, crankshaft alignment and durability under high cylinder pressure or rpm. Stud Kits and Main Bol...
View Main Stud & Bolt Kits Products