AVS 19-23 Kia Forte Outside Mount Ventvisor Deflector 4pc - Smoke

Shield Every Kia Forte Window from Wind, Rain, and Road Noise

The AVS 94190 Original Ventvisor is a precision-molded, outside-mount window deflector set built specifically for the 2019-2024 Kia Forte. Crafted from impact-resistant modified acrylic in a dark smoke finish, the AVS 94190 lets you crack your windows in any weather without catching rain, wind, or highway debris. Installation requires no drilling and no special tools, attaching firmly above the window channel with factory-grade 3M automotive adhesive tape included in the kit. Each set covers all four doors for a clean, finished look that holds up through sun, heat, cold, and rain for the life of your vehicle.

Key Features

• AVS 94190 outside-mount design fits the full 2019-2024 Kia Forte lineup including EX, FE, GT, GT-Line, LX, LXS, and S trims
• Impact-resistant dark smoke modified acrylic resists cracking, crazing, and UV fading over time
• No-drill tape-on installation attaches above the window with included 3M automotive-grade adhesive
• 4-piece set covers all four doors, front and rear
• Allows fresh air circulation through partially open windows while blocking rain and road spray
• Reduces interior heat buildup when parked with windows cracked
• Precision-engineered for a flush, OEM-matching profile on the 2019-2024 Forte body
• Backed by AVS Limited Lifetime Warranty

Fitment

Specifications

What's Included

• 4 AVS 94190 smoke ventvisor deflectors (2 front, 2 rear)
• Pre-applied 3M automotive-grade adhesive tape
• Installation instructions

About AVS (Auto Ventshade)

Auto Ventshade has been manufacturing vehicle accessories in the United States since 1935. The AVS Original Ventvisor is one of the most trusted window deflector designs on the market, engineered for precision fitment and long-term durability. AVS products are backed by a Limited Lifetime Warranty and built to OEM fit standards using materials that resist UV degradation, cracking, and discoloration across all climates.

Frequently Asked Questions

The AVS 94190 fits the EX, FE, GT, GT Line, GT-Line, LX, LXS, and S trims of the 2019-2024 Kia Forte. It does not fit the Forte5 hatchback, only the 4-door sedan body style.

No drilling or cutting is required. The 94190 attaches above the window channel using 3M automotive-grade adhesive tape that is pre-applied to the deflector. The tape bonds firmly to clean painted or coated metal surfaces.

Installation typically takes 30 to 45 minutes for all four pieces. Cleaning the mounting surface thoroughly before applying is the most important step to ensure a strong, lasting bond.

Yes. The outside-mount design sits above the window opening and does not interfere with window operation. Windows roll up and down normally after installation.

Part number 94190 is the dark smoke version. AVS does not offer this specific Kia Forte fitment in a chrome or clear finish. Dark smoke is the only available option for this vehicle application.

Yes, when installed correctly with a clean, prepared surface. The 3M tape used by AVS is automotive-grade and rated for car wash environments. Allow the adhesive to cure for 24 hours before running the vehicle through an automated wash.

The ventvisor is designed to deflect wind-driven rain when windows are cracked open during light to moderate rain. In heavy downpours or high winds, some water intrusion is possible if the window is opened more than a small amount.

AVS backs the 94190 Ventvisor with a Limited Lifetime Warranty against defects in materials and workmanship. Warranty claims are handled directly through Auto Ventshade.

Yes. The outside-mount design attaches above the glass and does not contact or interfere with window tint film applied to the inside of the glass surface.

Installation Instructions

1. Wash and dry the vehicle thoroughly, paying extra attention to the area above each window opening where the deflector will mount
2. Use isopropyl alcohol (70% or higher) to clean and degrease the exact mounting surface above the window channel on all four doors
3. Allow the cleaned surface to dry completely before proceeding
4. Test-fit each AVS 94190 deflector in position without removing the tape backing to confirm alignment
5. Starting at the front driver door, peel the tape backing from the deflector and press firmly into position above the window channel
6. Apply firm, even pressure along the entire length of the deflector for 60 seconds
7. Repeat for the front passenger, rear driver, and rear passenger doors
8. Allow the adhesive to cure for a minimum of 24 hours before driving at highway speeds or washing the vehicle

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.