Let the Elantra N keep its most aggressive exhaust path open
The Track Edition removes the passenger-side valve from the equation for constant valve-open behavior and a more assertive sound. 3020-33237 uses T304L stainless tubing and finishes the supported Elantra N with two Diamond Black tips.
Key Features
- 3020-33237 exact Track Edition with Diamond Black tips
- Three-inch and 2.5-inch mandrel-bent T304L tubing
- Constant valve-open behavior with no passenger-side valve
- Maximum published gain of 1 wheel horsepower and 2 lb-ft
- Two 5-inch double-walled slash-cut tips
- Direct bolt-on installation with no tune required
- Clamps and installation hardware included
Fitment
| Years |
Make |
Model |
Verified Application and Notes |
| 2022-2026 |
Hyundai |
Elantra N |
2.0L turbo; FWD; manual or DCT |
| Excluded |
Hyundai |
Elantra, N Line, Hybrid |
Different exhaust application |
Specifications
| Detail |
Value |
| Manufacturer Part Number |
3020-33237 |
| System |
Track Edition cat-back |
| Material |
T304L stainless steel |
| Tubing |
3-inch and 2.5-inch, 0.065-inch wall |
| Tip Finish |
Diamond Black |
| Tip Size |
5 inches |
| Valve Behavior |
Constant open; passenger-side valve omitted |
| Published Maximum Gain |
1 wheel horsepower and 2 lb-ft |
What's Included
- One complete 3020-33237 Track Edition cat-back system
- Split rear outlet sections
- Two Diamond Black tips
- Clamps and installation hardware
- No exhaust valve or valve electronics
About AWE Tuning
AWE develops stainless exhaust systems around application-specific sound targets and mounting geometry. Track Edition systems favor unrestricted sound and flow, while the separate SwitchPath configuration retains valve control.
Related Parts
- AWE SwitchPath exhaust for drivers who want retained valve control
- Replacement Diamond Black tip hardware
- Factory exhaust hangers inspected for wear before installation
FAQ
What is the 3020-33237?It is the AWE Track Edition cat-back exhaust with Diamond Black tips for the supported Hyundai Elantra N.
Does this system retain the factory valve?No. The Track Edition omits the passenger-side valve and runs with constant valve-open behavior.
Will it fit an Elantra N Line?No. The verified application is the Elantra N, not the N Line, regular Elantra, or Hybrid.
Does it fit both transmissions?No exact-product source states a manual or DCT exclusion, so both factory Elantra N transmissions are supported.
Are the tips included?Yes. Two 5-inch Diamond Black tips are included.
Is a tune required?No tune is required for the cat-back installation.
Is this the quieter AWE option?No. Track Edition is the aggressive constant-open configuration; SwitchPath is the controllable alternative.
What warranty applies?AWE covers qualifying original-owner exhaust defects under its published warranty; Track products are excluded from the sound-satisfaction program.
Installation Instructions
- Confirm the package identifies 3020-33237 and includes the Diamond Black Track Edition components.
- Allow the exhaust to cool and support the vehicle on approved lift points.
- Record factory tip alignment and disconnect the original rear exhaust sections.
- Remove the factory cat-back without damaging hangers, heat shields, or sensors.
- Assemble the front, center, and split rear sections loosely with the supplied clamps.
- Set clearance around the rear suspension, body, undertray, and bumper openings.
- Install and center both Diamond Black tips, then torque all clamps in the AWE sequence.
- Inspect for leaks or contact at idle and under light load, then recheck after heat cycling.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
