A well-tuned touring exhaust should add character under throttle without making every highway mile tiring. AWE Tuning 3015-43790 is built for 2025-2026 BMW M5 applications shown in the Fitment table. Key details are AWE Touring Edition and 3 in T304L main tubing with 2.5 in rear sections.
Use AWE Tuning 3015-43790 only for the applications below. Confirm every listed qualifier and exclusion.
| Years | Make | Model | Details |
|---|---|---|---|
| 2025-2026 | BMW | M5 | G90 Sedan; Verify factory exhaust and valve configuration |
| 2025-2026 | BMW | M5 | G99 Touring; Verify factory exhaust and valve configuration |
| Detail | Value |
|---|---|
| Brand | AWE Tuning |
| Manufacturer Part Number | 3015-43790 |
| Product Type | Cat-back exhaust system |
| manufacturer | AWE Tuning |
| mpn | the listed part number |
| product_type | Cat-back exhaust system |
| fitment_summary | BMW M5 G90 Sedan and G99 Touring 2025-2026; verify factory exhaust/valve configuration |
| technical_details | ['AWE Touring Edition', '3 in T304L main tubing with 2.5 in rear sections', '180 Technology', 'bespoke H-pipe', 'quad 4.5 in diamond black tips', '+11 hp/+12 lb-ft reported'] |
AWE engineers and manufactures performance exhaust and intake systems in Pennsylvania, pairing vehicle-specific fitment with carefully developed sound profiles.
It is a AWE Tuning cat-back exhaust system for 2025-2026 BMW M5 applications shown in the Fitment table, built around AWE Touring Edition.
What is the main benefit of this part?AWE Touring Edition; 3 in T304L main tubing with 2.5 in rear sections.
Which applications does it fit?It is intended for 2025-2026 BMW M5 applications shown in the Fitment table. Use the Fitment table and every listed qualifier before ordering.
What comes with this product?Complete Touring Edition cat-back exhaust; Four diamond black tips; Clamps; Installation hardware.
What construction details should I know?Cat-back exhaust system.
What should be checked before installation?Compare the old and new parts, confirm position and orientation, and verify all application notes, clearances, fasteners, and required companion parts.
How should this part be installed?Bolt the cat-back directly into place. Follow all torque, alignment, bleeding, calibration, or break-in procedures that apply.
What warranty applies?Perfect Fitment guarantee; lifetime tubing and weld warranty.
California Proposition 65 Warning: Required; AWE/retailer exact-MPN pages identify Proposition 65. Use the manufacturer warning without inventing a chemical.
Shop AWE Tuning exhaust systems, cold air intakes, intercoolers, conversion kits, valve components and performance accessories by exact manufacturer part number and verified vehicle fitment. AWE Performance Exhaust and Intake Systems AWE engineers application-specific performance parts for European, domestic and import cars, trucks and SUVs. Depending on the application, AWE exhaust systems can use U.S.-sourced T304L stainless steel, straight-through flow paths, vehicle-specific resonators, precision bends and multiple tip finishes. Construction, sound technology, valve operation, emissions status and included hardware are specific to the exact part number. Choose Your Part AWE Touring Edition Touring Edition systems are designed for drivers who want an aggressive performance tone with controlled cruising sound. Many applications use AWE 180 Technology® to target unwanted frequencies and reduce drone, but features vary by vehicle. AWE Track Edition Track Edition systems use a more ...
View AWE Products
Shop BMW M exhaust and intake applications by exact M model, chassis and engine. Start with M2, M3, M4 or M5 for more focused browsing. Model, Chassis and Exhaust Configuration G87 M2, F8X/G8X M3/M4 and F90/G90/G99 M5 references describe distinct applications. Match the actual body, engine, production and factory exhaust controls. Touring, Track and SwitchPath use different sound-control configurations. Confirm valve-motor requirements, outlet layout and supplied components before comparing finish. Intakes, Midpipes and Complete Systems A G8X intake needs the exact engine, sensors, turbo connections and mounting. M badging alone does not establish that another model’s intake fits. Midpipes and conversion sections are different from complete cat-backs. Provide the installed exhaust part number and retained components when checking an upgrade. Choose Your Part Identify exact M model, chassis, body and engine. Match valve controls and exhaust outlet configuration. Confirm intake senso...
View BMW M Products
Explore BMW M5 parts by chassis, engine and body. Earlier petrol generations, F90 AWD and the newer plug-in hybrid need distinct exhaust, induction and chassis applications. Exhaust Configuration by Generation Select exact chassis and sedan or Touring coverage before comparing exhaust sound. F90 systems and G90/G99 hybrid systems have different installation applications. Compare complete cat-back systems with mid-pipes and conversion pieces. Review valve operation, resonation, tips and original components retained for the actual system. Powertrain and Lighting Equipment The M5 name spans different engine layouts, including V10, V8 and later V8 plug-in hybrid versions. Match induction, cooling and service parts to the actual powertrain. DRL modules require original lamp technology, connector, module and production coverage. Brake and suspension purchases also need the installed equipment and exact drivetrain application. Choose Your Part Identify chassis, powertrain and body. Compar...
View BMW M5 Parts and Accessories Products
