2015-2020 Ford F-150 2.7L & 3.5L EcoBoost - 3" Single Exit Catback Exhaust, Dual Coated Tips (Super Cab 8ft Bed)

A Deeper Growl For Your EcoBoost Without The Highway Drone

B929-C920-CD is a direct bolt-on 3 inch catback exhaust system engineered specifically for the 2015-2020 Ford F-150 2.7L & 3.5L EcoBoost with a 163.7 inch wheelbase. If the factory exhaust feels flat under throttle and drones at cruising speed, this system gives the truck a deeper, more confident voice without turning every highway drive into a headache.

The single exit configuration routes through mandrel bent T304 stainless steel tubing and finishes in black ceramic coated dual coated tips, giving the Super Cab 8ft Bed F-150 a cleaner look out back to match the improved sound.

Key Features

• Direct bolt-on fitment for the 2015-2020 Ford F-150 2.7L & 3.5L EcoBoost, Super Cab 8ft Bed
• Full 3 inch mandrel bent T304 stainless steel construction
• True Helmholtz Technology tuned to cancel low frequency cabin drone
• Single Exit exhaust configuration with dual black ceramic coated tips
• Installs using factory hanger locations, no cutting or welding required
• Mounts directly to OEM catalytic converters or downpipes
• Corrosion resistant stainless steel built for long term durability
• Backed by a Lifetime Manufacturer's Warranty
• B929-C920-CD part number engineered and manufactured in the USA by Thermal R&D

Fitment

Specifications

What's Included

• 1x B929-C920-CD catback exhaust system (mid pipe, muffler, and tailpipe sections)
• Dual black ceramic coated exhaust tips
• All clamps and hardware needed for installation
• Installation instructions

About Thermal R&D

Thermal R&D got its start as a small muffler shop in Canoga Park, California, and has grown into a manufacturer known for solving the exhaust drone problem other brands ignore. Every system is built in the USA from mandrel bent T304 stainless steel and tuned using the company's proprietary True Helmholtz Technology, which targets the specific low frequency resonance that causes cabin drone rather than just adding sound deadening. The result is an exhaust that sounds aggressive under throttle and stays livable on long highway drives, backed by a Lifetime Manufacturer's Warranty on every catback system they build.

FAQ

The B929-C920-CD is a Thermal R&D 3 inch catback exhaust system built for the 2015-2020 Ford F-150 2.7L & 3.5L EcoBoost, Super Cab 8ft Bed, featuring a single exit configuration with dual black ceramic coated tips.

No. This is a catback system that installs behind the factory catalytic converters, so it does not affect the factory emissions equipment or trigger a check engine light.

No cutting or welding is required. The system bolts up using the factory hanger locations and connects at the factory catalytic converter or downpipe flange.

Idle and cruise are noticeably deeper than stock but not obnoxious. The True Helmholtz Technology is specifically tuned to cancel the resonant drone frequency that shows up at steady highway RPM.

Most owners install this in a few hours in a home garage with basic hand tools and a jack. If you are not comfortable working under the truck, any exhaust shop can complete the install quickly.

Fitment is specific to the cab and bed configuration listed for this part number. Always confirm your exact cab, bed length, and factory exhaust configuration before ordering.

Both tips are the same stainless steel construction. The polished finish gives a bright chrome-like look, while the black ceramic coated finish gives a more stealth, blacked-out appearance.

Since this system retains all factory catalytic converters and only replaces the exhaust downstream of them, it does not alter the vehicle's emissions control equipment.

No. This is an exhaust system only and does not affect the suspension, steering, or alignment of the truck.

Thermal R&D backs the B929-C920-CD with a Lifetime Manufacturer's Warranty against defects in materials and workmanship.

Install Instructions

1. Raise and safely support the truck on jack stands, then allow the exhaust system to cool completely if the vehicle has been driven recently.
2. Spray the factory rubber exhaust hangers with a lubricant such as WD-40 or soapy water to ease removal.
3. Remove the factory catback exhaust starting at the catalytic converter or downpipe flange, working back toward the tailpipe, and disconnect all hangers.
4. Test fit the B929-C920-CD mid pipe section to the factory flange using the factory hardware, leaving connections loose for adjustment.
5. Mark a witness line on each pipe joint, slide on the provided band clamps, and connect the muffler section to the mid pipe up to the witness mark.
6. Install the tailpipe section into the rear hanger and connect it to the muffler outlet, aligning the Dual Coated Tips for a level, centered fit.
7. Slide the dual tips into place over the tailpipe outlet and tighten the tip clamps securely.
8. Go back through every clamp and hanger connection, tighten fully, and inspect for adequate clearance from the frame, fuel tank, and heat shields before driving.