Click to zoom in
Straight-Piped Confidence for Your 5.0L Coyote
When you drop the hammer on a Coyote-powered F-150, the exhaust note should match the intent behind every pull of the throttle. The B943-C926 dual exit catback from Thermal R&D replaces the factory mid pipe back with a mandrel-bent 3 inch stainless system tuned to deliver a deep, aggressive tone without drone at highway cruise. Built specifically for SuperCrew trucks riding on the 6.5ft bed and 157.2 inch wheelbase, this system bolts in place using factory hangers and delivers a noticeable gain in exhaust flow along with a set of polished stainless tips that finish off the rear of the truck.
Key Features
- Mandrel-bent 3 inch T304 stainless steel construction resists rust and cracking
- Dual exit rear exhaust with polished stainless tips
- Direct bolt-on fitment using OEM hanger locations, no cutting or drilling
- Reduced backpressure improves exhaust flow over the factory 5.0L Coyote system
- Aggressive yet drone-free tone tuned for daily driving and highway cruising
- B943-C926 ships fully assembled with all clamps and hardware needed for install
Fitment
| Year Range | Make | Model | Trim |
|---|---|---|---|
| 2015-2020 | Ford | F-150 | SuperCrew 6.5ft Bed, 5.0L Coyote V8, 157.2in Wheelbase |
Specifications
| Detail | Value |
|---|---|
| MPN | B943-C926 |
| Pipe Diameter | 3 inch |
| Material | T304 Stainless Steel |
| Exit Configuration | Dual Exit |
| Tip Finish | Polished Stainless |
| Bed Length | 6.5ft (SuperCrew) |
| Wheelbase | 157.2 inches |
| UPC | Not published by manufacturer |
What's Included
- One (1) complete B943-C926 dual exit catback exhaust system
- Two (2) polished stainless exhaust tips
- All required clamps and OEM-style hangers
- Installation hardware
About Thermal R&D
Thermal R&D designs and manufactures performance exhaust systems engineered around real-world drivability. Every system is mandrel-bent from aircraft-grade stainless steel and tuned in-house to strike a balance between an aggressive tone and daily-driver comfort, avoiding the interior drone that plagues many aftermarket catbacks.
Frequently Asked Questions
What is the B943-C926?The B943-C926 is a Thermal R&D 3 inch dual exit catback exhaust system built for 2015-2020 Ford F-150 SuperCrew trucks with the 5.0L Coyote V8 and 6.5ft bed, finished with polished stainless tips.
Will this exhaust fit my SuperCrew F-150 exactly as listed?Yes, the B943-C926 is designed specifically for the 157.2 inch wheelbase SuperCrew 6.5ft bed configuration and bolts directly to factory hanger locations.
Does installation require any cutting or welding?No, this system is a direct bolt-on replacement that uses the factory exhaust hangers, so no cutting or welding is required.
How loud is this exhaust compared to stock?It delivers a noticeably deeper and more aggressive tone than the factory exhaust at idle and under acceleration, while remaining free of interior drone during highway cruising.
Can I install this exhaust myself at home?Most experienced DIYers can complete the install in under two hours with basic hand tools and a vehicle lift or jack stands.
Will this system trigger any check engine lights or codes?No, the B943-C926 does not affect any factory sensors and does not trigger check engine lights when installed correctly.
Is a resonator included in this system?Yes, the system includes Thermal R&D's tuned resonator design to control drone while preserving an aggressive exhaust tone.
What is the warranty on this exhaust system?Thermal R&D backs the B943-C926 with a manufacturer warranty against defects in materials and workmanship; contact us for full warranty terms.
Do the polished tips require any special maintenance?Occasional cleaning with a stainless steel polish will keep the tips looking new and help prevent heat discoloration over time.
Install Instructions
- Raise the vehicle safely and allow the factory exhaust system to cool completely
- Remove the factory catback exhaust starting at the mid pipe connection back to the rear hangers
- Test fit the B943-C926 system, aligning the mid pipe connection and rear hangers before tightening
- Secure all clamps and hangers, leaving slight play until final alignment is confirmed
- Adjust tip alignment for even spacing, then torque all clamps to final specification
- Start the engine and inspect all joints for leaks before lowering the vehicle
Thermal R&D
Thermal R&D exhaust systems are premium stainless steel performance exhaust upgrades for Ford, Honda, Acura, RAM, Jeep, Chevrolet, Subaru, Toyota, Scion, and Kia performance applications. Shop Thermal R&D cat-back exhaust systems, front-pipe-back exhausts, mid-pipe-back exhausts, downpipe-back exhausts, mufflers, exhaust tips, polished tips, coated tips, carbon fiber tips, and bolt-on exhaust upgrades at Black Ops Auto Works. Thermal R&D is a strong choice for drivers who want a deeper exhaust tone, improved exhaust flow, reduced cabin drone, quality construction, and vehicle-specific fitment. This collection includes Thermal R&D exhaust systems for Ford F-150, Ford Bronco, Ford Mustang GT, Ford Mustang EcoBoost, Ford Maverick EcoBoost, Ford Explorer ST, Ford Edge ST, RAM 1500 HEMI, Honda Civic Si, Honda Civic Type R, Honda Accord Sport, Acura Integra, Jeep Wrangler JK, Chevrolet Camaro, Kia Stinger GT, Subaru BRZ, Toyota 86, and Scion FR-S. Shop Thermal R&D Exha...
View Thermal R&D Products