-4%
BAK 80307 Revolver X4s 04-14 Ford F-150 6.7ft Bed Cover
BAK 80307 Revolver X4s 04-14 Ford F-150 6.7ft Bed Cover
BAK 80307 Revolver X4s 04-14 Ford F-150 6.7ft Bed Cover
BAK 80307 Revolver X4s 04-14 Ford F-150 6.7ft Bed Cover
BAK 80307 Revolver X4s 04-14 Ford F-150 6.7ft Bed Cover
BAK 80307 Revolver X4s 04-14 Ford F-150 6.7ft Bed Cover
BAK 80307 Revolver X4s 04-14 Ford F-150 6.7ft Bed Cover
BAK 80307 Revolver X4s 04-14 Ford F-150 6.7ft Bed Cover
Click to zoom in

BAK 04-14 Ford F-150 Revolver X4s 6.7ft Bed Cover

BAK
BAK80307
192631032236
Tonneau Covers - Roll Up
6 Units In Stock - Ships Next Business Day
$ 1,545.37 $ 1,479.99
FREE Ground Shipping!
$ 1,479.99

Secure Hard Roll-Up Bed Cover for 2004-2014 Ford F-150 with a 6.7 Foot Bed

The BAK Industries Revolver X4s (part number 80307) is a precision-fit hard roll-up tonneau cover designed for 2004-2014 Ford F-150 trucks equipped with the 6.7-foot (80-inch) cargo bed, including 2007-2008 Lincoln Mark LT. The Revolver X4s 80307 combines patented interlocking aluminum slats, a TriShield 70-grade matte vinyl surface, and rotational locking rails to deliver the highest level of security in the hard roll-up category. An all-matte-black finish, flush-profile design, and simple clamp-on installation make the 80307 a premium upgrade that enhances both appearance and cargo protection.

Key Features and Benefits

  • Patented interlocking aluminum slats with slash-resistant, cut-resistant construction
  • Patented rotational locking rails and automatic slam latches for Level-3 security
  • TriShield 70-grade one-piece aluminum-reinforced vinyl surface with no seams and no leak points
  • All-matte-black finish on slats, clamps, hardware, and aluminum underbody
  • Flush side seals and integrated bulkhead seal for maximum weather resistance
  • PrecisionRoll technology enables smooth one-handed rolling operation
  • Integrated safety straps secure cover in full-open position for full bed access
  • Ultra-low-profile design sits nearly flush with the bed rails
  • 400-lb evenly distributed weight capacity
  • Integrated safety slat caps and redesigned rear corner caps
  • No-drill, clamp-on installation in under one hour
  • 5-year limited warranty

Vehicle Fitment

Year Make Model Trim Bed Size
2004 Ford F-150 XL, XLT, Lariat, STX, FX4 6.7'
2005 Ford F-150 XL, XLT, Lariat, STX, FX4 6.7'
2006 Ford F-150 XL, XLT, Lariat, STX, FX4, Harley-Davidson 6.7'
2007 Ford F-150 XL, XLT, Lariat, STX, FX2, FX4, King Ranch 6.7'
2008 Ford F-150 XL, XLT, Lariat, STX, FX2, FX4, King Ranch 6.7'
2009 Ford F-150 XL, XLT, Lariat, STX, FX4, King Ranch, Platinum 6.7'
2010 Ford F-150 XL, XLT, Lariat, STX, FX2, FX4, King Ranch, Platinum 6.7'
2011 Ford F-150 XL, XLT, Lariat, STX, FX4, King Ranch, Platinum 6.7'
2012 Ford F-150 XL, XLT, Lariat, STX, FX4, King Ranch, Platinum 6.7'
2013 Ford F-150 XL, XLT, Lariat, STX, FX2, FX4, King Ranch, Platinum 6.7'
2014 Ford F-150 XL, XLT, Lariat, STX, FX2, FX4, King Ranch, Platinum 6.7'
2007 Lincoln Mark LT All Trims 6.7'
2008 Lincoln Mark LT All Trims 6.7'

Product Specifications

Specification Detail
Part Number 80307
UPC 819275019926
Cover Series Revolver X4s
Panel Material Interlocking matte-black aluminum slats with TriShield 70-grade vinyl surface
Finish Full matte black - slats, clamps, hardware, and underbody
Bed Length 6.7' (80")
Cover Type Hard roll-up
Weight Capacity 400 lbs evenly distributed
Seal Type Flush side seals, integrated bulkhead seal, TriShield no-seam vinyl
Warranty 5-Year Limited
Hardware Included Yes - clamp-on mounting kit, no drilling required

What's Included

  • Revolver X4s 80307 hard roll-up cover assembly
  • Aluminum side rail extrusions
  • Clamp-on mounting hardware (no drilling required)
  • Integrated safety straps for full-open position
  • Rear corner caps and integrated slat caps
  • Installation instructions

Frequently Asked Questions

Does the Revolver X4s 80307 fit the 2004-2014 Ford F-150 6.7-foot bed?
Yes. The 80307 is specifically designed for 2004-2014 Ford F-150 trucks with the 6.7-foot bed length, as well as 2007-2008 Lincoln Mark LT with the same bed configuration.

How does the Revolver X4s 80307 lock?
The 80307 uses patented rotational locking rails and automatic slam latches that lock the cover when closed. Closing the tailgate engages the full locking system for Level-3 security.

Is the Revolver X4s 80307 waterproof?
Yes. The one-piece TriShield vinyl has no seams to leak. Combined with flush side seals and an integrated bulkhead seal, the 80307 provides comprehensive weather protection.

What is the weight rating for the Revolver X4s 80307?
The 80307 supports up to 400 lbs of evenly distributed weight on the closed cover.

Can I access the full truck bed with the Revolver X4s 80307?
Yes. Roll the cover to the cab end and secure it with the integrated safety straps for 100 percent bed access without removing the cover.

Does the Revolver X4s 80307 require drilling or modification?
No. The 80307 uses a no-drill, clamp-on mounting system compatible with the stock F-150 bed rail. Installation takes less than one hour.

Is the Revolver X4s 80307 compatible with a spray-in bed liner?
Yes. The clamp-on side rails mount on the bed rail top, so the 80307 works with both spray-in and drop-in bed liners.

Does the Revolver X4s 80307 fit the Heritage F-150 or F-150 with cargo management?
The 80307 is not compatible with factory bed storage boxes or certain cargo management rail systems. Confirm your specific bed configuration before ordering.

Installation Steps

  1. Clear the truck bed of any loose items and check the bed rail for any obstructions.
  2. Place the Revolver X4s 80307 roll-up assembly in the bed and position the side rails on the inner top edge of the bed rails.
  3. Insert clamp brackets into the rail channels at the front, middle, and rear of each side rail.
  4. Finger-tighten all clamps, then verify the rails are level and aligned from cab to tailgate.
  5. Torque all clamps to the specification listed in the included instructions.
  6. Attach the bulkhead seal at the cab end of the cover assembly.
  7. Roll the cover fully closed and confirm the slam latches engage on both sides.
  8. Roll the cover open, secure with integrated safety straps, and verify stability before driving.

Prop 65 Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Request For Information

Have questions about BAK 04-14 Ford F-150 Revolver X4s 6.7ft Bed Cover? Fill out the form below and we'll get back to you by the next business day.
BAK

BAK

BAK Industries tonneau covers for pickup trucks are stocked at Black Ops Auto Works. Shop BAKFlip MX4 and MX4 EZ-Lift hard folding covers, Revolver X4s rolling covers, and BAKFlip G2 covers for Ford F-150, Ford Ranger and Maverick and Super Duty, RAM 1500 through 3500, Chevrolet Colorado and GMC Canyon, Toyota Tacoma and Tundra, Nissan Titan and Frontier, Jeep Gladiator, and Honda Ridgeline. Every product is filterable by year, make, model, bed length, and trim so the correct cover ships the first time. Black Ops Auto Works carries 315 BAK SKUs across hard folding, rolling, and low-profile tonneau covers. What This Brand Covers BAK Industries has built its reputation on hard folding and rolling truck bed covers that combine security, all-weather protection, and low-profile styling that does not compromise truck aesthetics. Made in the USA by a RealTruck brand, every BAK tonneau cover is engineered with application specific fitment for a leak-resistant seal and tool-free installa...

View BAK Products
Exterior Parts & Accessories

Exterior Parts & Accessories

Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...

View Exterior Parts & Accessories Products
Tonneau Covers

Tonneau Covers

Tonneau covers for full-size and mid-size pickups are stocked at Black Ops Auto Works. Shop soft roll-up covers, hard tri-fold covers, retractable covers, hinged bed caps, and bed toppers built for F-150, Silverado, Sierra, Ram 1500, Ram 2500, Tacoma, Tundra, and Jeep Gladiator beds. Every product is filterable by year, make, model, bed length, and cab style so the correct cover ships the first time. Black Ops Auto Works carries 1,205 tonneau cover SKUs across roll up, hard fold, retractable, soft fold, and bed cap styles. What This Category Covers Tonneau covers protect truck cargo beds from weather, theft, and UV exposure while improving the aerodynamic profile of the vehicle for a fuel economy benefit. Available in soft and hard construction across multiple opening styles, tonneau covers are among the most popular truck bed accessories across full-size and mid-size pickup platforms. Soft Roll-Up and Soft Fold Covers Soft roll-up tonneau covers offer lightweight coverage, simp...

View Tonneau Covers Products
Tonneau Covers - Roll Up

Tonneau Covers - Roll Up

Roll up tonneau covers provide affordable truck bed protection with quick access for Silverado, Sierra, F-150, Ram 1500, Tacoma, Tundra, Ranger, Colorado, Canyon, Frontier, Titan, Maverick and Super Duty owners. Shop soft vinyl roll-up covers, low-profile fabric covers, aluminum slat roll-up covers, tension-adjustable covers, clamp-on rails, tailgate seals, replacement bows and cover hardware. Every product is filterable by year, make, model, trim, bed length, cab style, tailgate type, cargo rail system and bedliner configuration so the correct cover ships the first time. Black Ops Auto Works carries 188 roll up tonneau cover SKUs across fabric construction, rail design, security, weather protection and rack compatibility. What Roll Up Tonneau Covers Offer Fast cargo access with a compact open position Roll-up covers secure along the bed rails and roll toward the cab when full access is needed. They are a smart choice for truck owners who regularly switch between covered everyda...

View Tonneau Covers - Roll Up Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×