Click to zoom in
Hard Folding Tonneau Cover Built for 2017-2023 Ford F-250 and F-350 Super Duty with a 6'9" Bed
The BAK Industries BAKFlip F1 (part number 772330) is engineered specifically for the 2017-2023 Ford F-250 and F-350 Super Duty trucks equipped with a 6'9" (6 ft 9 in) cargo bed. Combining heavy-duty FRP (fiber-reinforced plastic) top skins with powder-coated aluminum lower panels over a rigid high-density foam core, the BAKFlip F1 772330 delivers impact-resistant, dent-proof protection that stays cool in direct sunlight. A patented auto-latching system and full-perimeter EPDM seals provide both security and all-weather cargo protection for demanding work-truck and adventure use.
Key Features and Benefits
- Heavy-duty FRP top skins with powder-coated aluminum lower panels and high-density foam core
- Dent-resistant and heat-reflective panel construction
- 400-lb evenly distributed weight capacity for cargo hauling on top of the cover
- Automatic-latching panels engage against aluminum side rails on every closure
- Premium EPDM rubber perimeter seals with wrap-around coverage
- Dual-action tailgate seal blocks moisture at the tailgate
- Integrated water drainage system channels water out of the bed
- Ultra-low-profile design integrates seamlessly with bed rail height
- Folds fully forward to the cab for 100 percent bed access
- 3rd brake light visibility maintained in all cover positions
- No-drill, clamp-on installation with included hardware
- BAKBox2 compatible for optional under-cover storage
- 5-year limited warranty
Vehicle Fitment
| Year | Make | Model | Trim | Bed Size |
|---|---|---|---|---|
| 2017 | Ford | F-250 Super Duty | XL, XLT, Lariat, King Ranch, Platinum | 6'9" |
| 2018 | Ford | F-250 Super Duty | XL, XLT, Lariat, King Ranch, Platinum, Limited | 6'9" |
| 2019 | Ford | F-250 Super Duty | XL, XLT, Lariat, King Ranch, Platinum, Limited | 6'9" |
| 2020 | Ford | F-250 Super Duty | XL, XLT, Lariat, King Ranch, Platinum, Limited | 6'9" |
| 2021 | Ford | F-250 Super Duty | XL, XLT, Lariat, King Ranch, Platinum, Limited | 6'9" |
| 2022 | Ford | F-250 Super Duty | XL, XLT, Lariat, King Ranch, Platinum, Limited | 6'9" |
| 2023 | Ford | F-250 Super Duty | XL, XLT, Lariat, King Ranch, Platinum, Limited | 6'9" |
| 2017 | Ford | F-350 Super Duty | XL, XLT, Lariat, Platinum | 6'9" |
| 2018 | Ford | F-350 Super Duty | XL, XLT, Lariat, Platinum, Limited | 6'9" |
| 2019 | Ford | F-350 Super Duty | XL, XLT, Lariat, Platinum, Limited | 6'9" |
| 2020 | Ford | F-350 Super Duty | XL, XLT, Lariat, Platinum, Limited | 6'9" |
| 2021 | Ford | F-350 Super Duty | XL, XLT, Lariat, Platinum, Limited | 6'9" |
| 2022 | Ford | F-350 Super Duty | XL, XLT, Lariat, Platinum, Limited | 6'9" |
| 2023 | Ford | F-350 Super Duty | XL, XLT, Lariat, Platinum, Limited | 6'9" |
Product Specifications
| Specification | Detail |
|---|---|
| Part Number | 772330 |
| UPC | 819275013833 |
| Cover Series | BAKFlip F1 |
| Panel Material | FRP top skins with powder-coated aluminum lower panels over high-density foam core |
| Finish | Matte black FRP top with powder-coated black aluminum underside |
| Bed Length | 6'9" (81") |
| Panel Count | 4 |
| Weight Capacity | 400 lbs evenly distributed |
| Seal Type | Premium EPDM rubber perimeter seals with dual-action tailgate seal |
| Warranty | 5-Year Limited |
| Hardware Included | Yes - clamp-on mounting kit, no drilling required |
What's Included
- BAKFlip F1 772330 hard-folding tonneau cover panels
- Aluminum side rail extrusions
- Clamp-on mounting hardware (no drilling required)
- EPDM rubber perimeter seals (pre-installed)
- Integrated water drain tubes
- Dual-action tailgate seal
- Installation instructions
Frequently Asked Questions
Does the BAKFlip F1 772330 fit both F-250 and F-350 Super Duty trucks?
Yes. The 772330 is designed for 2017-2023 Ford F-250 Super Duty and F-350 Super Duty trucks with the 6-foot-9-inch bed configuration.
How does the BAKFlip F1 772330 lock?
The BAKFlip F1 772330 features automatic-latching panels that lock against the aluminum side rails whenever each panel is closed. When the tailgate is shut, the entire bed is secured.
Is the BAKFlip F1 772330 waterproof?
The 772330 uses full-perimeter EPDM rubber seals and a dual-action tailgate seal to resist water infiltration. An integrated drain tube system routes any collected moisture safely out of the bed.
What weight can the BAKFlip F1 772330 support?
The 772330 supports up to 400 lbs of evenly distributed weight on the closed cover surface.
Can I open the full bed with the BAKFlip F1 772330 installed?
Yes. All panels fold forward toward the cab and are secured in the fully open position, providing complete access to the entire 6'9" truck bed.
Does the BAKFlip F1 772330 require drilling?
No drilling is required. The 772330 uses a no-drill, clamp-on mounting system that attaches to the existing bed rail without modification.
Is the BAKFlip F1 772330 compatible with a gooseneck or 5th-wheel hitch?
The 772330 does not interfere with most factory bed-mounted gooseneck balls, but you should confirm compatibility with any aftermarket hitch or bed-rail anchor system.
Does the BAKFlip F1 772330 work with a bed liner?
Yes. The 772330 clamps to the top of the bed rail and is compatible with spray-in and drop-in bed liners already installed in the truck.
Installation Steps
- Remove any existing bed accessories that may interfere with rail placement.
- Unfold the BAKFlip F1 772330 panels in the truck bed and lay them flat from front to back.
- Position the aluminum side rails against the inside lip of the bed rails on both sides.
- Insert clamp assemblies into the side rail channels and finger-tighten at front, center, and rear positions on each side.
- Confirm the side rails are flush and level, then tighten all clamps to the torque specified in the included instructions.
- Attach the dual-action tailgate seal to the tailgate with the provided adhesive.
- Route the integrated drain tubes through the factory bed drain holes or along the inner bed wall.
- Cycle all panels open and closed to verify each auto-latch engages fully and the cover lays flat.
Prop 65 Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
BAK
BAK Industries tonneau covers for pickup trucks are stocked at Black Ops Auto Works. Shop BAKFlip MX4 and MX4 EZ-Lift hard folding covers, Revolver X4s rolling covers, and BAKFlip G2 covers for Ford F-150, Ford Ranger and Maverick and Super Duty, RAM 1500 through 3500, Chevrolet Colorado and GMC Canyon, Toyota Tacoma and Tundra, Nissan Titan and Frontier, Jeep Gladiator, and Honda Ridgeline. Every product is filterable by year, make, model, bed length, and trim so the correct cover ships the first time. Black Ops Auto Works carries 315 BAK SKUs across hard folding, rolling, and low-profile tonneau covers. What This Brand Covers BAK Industries has built its reputation on hard folding and rolling truck bed covers that combine security, all-weather protection, and low-profile styling that does not compromise truck aesthetics. Made in the USA by a RealTruck brand, every BAK tonneau cover is engineered with application specific fitment for a leak-resistant seal and tool-free installa...
View BAK Products
Exterior Parts & Accessories
Exterior parts and accessories for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop bumpers, grilles, fender flares, running boards, nerf bars, tonneau covers, mud flaps, front lips, splitters, spoilers, diffusers, body kits, carbon fiber panels, roof racks, bed accessories, tow hooks, and car covers for daily drivers, work trucks, and performance builds. Every product is filterable by category, brand, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 9,697 exterior parts SKUs across style, protection, and utility categories. What This Category Covers Exterior parts change how a vehicle looks, protects itself, and hauls gear. Fitment depends on body style, cab and bed configuration, and factory sensor or camera equipment, so confirm compatibility before ordering. Appearance Upgrades Grilles, front lips, splitters, spoilers, diffusers, and body kits update the front end and aero character of a ...
View Exterior Parts & Accessories Products
Tonneau Covers
Tonneau covers for full-size and mid-size pickups are stocked at Black Ops Auto Works. Shop soft roll-up covers, hard tri-fold covers, retractable covers, hinged bed caps, and bed toppers built for F-150, Silverado, Sierra, Ram 1500, Ram 2500, Tacoma, Tundra, and Jeep Gladiator beds. Every product is filterable by year, make, model, bed length, and cab style so the correct cover ships the first time. Black Ops Auto Works carries 1,205 tonneau cover SKUs across roll up, hard fold, retractable, soft fold, and bed cap styles. What This Category Covers Tonneau covers protect truck cargo beds from weather, theft, and UV exposure while improving the aerodynamic profile of the vehicle for a fuel economy benefit. Available in soft and hard construction across multiple opening styles, tonneau covers are among the most popular truck bed accessories across full-size and mid-size pickup platforms. Soft Roll-Up and Soft Fold Covers Soft roll-up tonneau covers offer lightweight coverage, simp...
View Tonneau Covers Products
Tonneau Covers - Hard Fold
Hard fold tonneau covers for full size and mid size trucks are stocked at Black Ops Auto Works. Shop tri fold, quad fold, low profile, and aluminum panel hard covers, along with mounting rails, clamp on hardware, and replacement seals for RAM 1500, Ford F-150, F-250, F-350, Chevy Silverado, GMC Sierra, Toyota Tacoma, Toyota Tundra, and Jeep Gladiator beds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 311 hard fold tonneau cover SKUs across panel material, fold style, bed length, and brand. What This Collection Covers Hard fold tonneau covers use rigid aluminum or fiberglass reinforced panels that fold forward in sections to expose the bed when full access is needed. Tri fold designs use three panels while quad fold designs use four smaller panels for tighter stacking near the cab. Both styles lock down over the tailgate for theft deterrence and weather protection that soft ro...
View Tonneau Covers - Hard Fold Products