-22%
Click to zoom in
Extra harness reach for Mustang exhaust installations
BBK 1119 provides a sealed 12-inch extension for each front six-pin oxygen-sensor connector on compatible 2015-2017 Ford Mustang GT and V6 models, avoiding cut-and-splice wiring.
Key Features
- BBK 1119: Pair of 12-inch harness extensions
- Front six-pin connector configuration
- Sealed OEM-style connectors
- Protective heat sleeves
- Plug-and-play installation
- No wire cutting or splicing
Fitment
Use BBK 1119 only for the applications below. Confirm every listed qualifier and exclusion.
| Years | Make | Model | Details |
|---|---|---|---|
| 2015-2017 | Ford | Mustang | GT; front six-pin oxygen sensors |
| 2015-2017 | Ford | Mustang | V6; front six-pin oxygen sensors |
Specifications
| Detail | Value |
|---|---|
| Brand | BBK |
| Manufacturer Part Number | 1119 |
| Product Type | Oxygen Sensor Harness Extensions |
| Position | Front oxygen sensors |
| Connector | 6-pin OEM style |
| Length | 12 in each |
| Quantity | Pair |
| Protection | Heat sleeves |
| Wiring Modification | None required |
What's Included
- Two 12-inch front oxygen-sensor harness extensions with heat sleeves for BBK 1119
- Not included: Oxygen sensors
- Not included: Rear-sensor extensions
- Not included: Exhaust components
About BBK
BBK Performance designs bolt-on air, fuel, and exhaust upgrades for late-model American performance vehicles, with application-specific hardware intended to simplify installation.
Related Parts
- Use only with the matching front six-pin oxygen sensors; the sensors and any exhaust components are sold separately.
FAQ
What is the 1119?It is a pair of BBK 12-inch front oxygen-sensor wiring extensions with sealed six-pin connectors.
What does this part fit?It fits the listed 2015-2017 Ford Mustang GT and V6 front oxygen-sensor connections.
What is it made from?It uses insulated automotive wiring, sealed OEM-style connectors, and protective heat sleeves.
What comes in the box?Two front harness extensions are included.
Is professional installation recommended?Installation is plug-and-play, but safe routing near hot exhaust parts is essential.
Does installation require other parts?Oxygen sensors and exhaust components are not included.
How should fitment be checked before ordering?Compare every listed year, model, position, dimension, drivetrain, engine, and configuration qualifier with the vehicle or mounting interface.
What warranty applies?BBK lists a one-year manufacturer warranty.
Installation Instructions
- Confirm the Mustang model, engine, model year, front sensor position, and six-pin connector before installation.
- Allow the exhaust to cool and disconnect the battery.
- Connect each extension between the factory harness and front oxygen sensor, then route it away from exhaust heat and moving parts.
- Secure the heat sleeves and wiring, reconnect the battery, and verify there are no wiring faults.
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
BBK
Shop BBK headers, exhaust systems, cold air intakes, throttle bodies, fuel-system components, oil separators, suspension parts, pulleys, sensors, wiring, and service hardware. Each product page identifies the verified vehicle application or exact universal interface. Airflow and Exhaust BBK intake, throttle-body, header, mid-pipe, and exhaust components are application specific. Match the complete vehicle, engine requirement, transmission, emissions configuration, factory equipment, pipe diameter, flange style, and companion components before ordering. Fuel, Chassis, and Service Components Fuel-system, oil-separation, suspension, wiring, sensor, pulley, gasket, and hardware products require exact part-number selection. Confirm every pressure, flow, thread, fitting, connector, mounting point, side, position, dimension, material, and quantity. Choose Your Part Match the complete year, make, model, and listed application Confirm engine, transmission, drivetrain, body style, emissions ...
View BBK Products
Ford Mustang Parts & Accessories
Find Ford Mustang exhaust and body accessories by generation, engine, body and installed exhaust equipment. Keep S550/S650, GT and Dark Horse applications explicit. Exhaust Configuration and Active Hardware Match Track, Touring or SwitchPath configuration to exact engine, body and manufacturer application. Compare tip layout and complete-system contents. A valve-motor bracket for an active-exhaust application is a supporting component, not a complete cat-back. Identify actual installed valve equipment and any previous exhaust changes. Generation-Specific Protection Match hood protectors to exact production range and panel or fascia application. Different Mustang body revisions should remain separate. Review installation instructions and the actual components supplied. Retain exact exhaust part references and conversion details for future service or configuration changes. Choose Your Part Record generation, engine and exact body. Identify active or other installed exhaust equipment....
View Ford Mustang Parts & Accessories Products