BBK 79-93 Ford Mustang 5.0L 1-3/4 Long Tube Headers w/High Flow Catted X-Pipe (Ti Ceramic)

SKU: 15942

Ford Mustang 5.0L 1-3/4 Long Tube Exhaust Headers Titanium Ceramic & 2-1/2 Short High Flow Catted X-Pipe 79-93

These BBK Performance full length exhaust headers and matching high flow catted mid pipe kits offer unsurpassed value, performance, quality, and fitment. Dyno tested and built right here in the USA our products outperform the competition hands down.

Every long tube exhaust header system is built with CNC mandrel bent tubing for unrestrictive exhaust flow and maximum performance. All headers include 3/8" laser cut exhaust flanges, patented scavenging collector design and gasket less ball and socket connectors to easily connect the matching mid pipes.

These performance exhaust kits have been designed specifically for your vehicles application to get the most horsepower and torque to the ground for maximum performance across the RPM range.

All matching mid pipes included in our kits have high flow catalytic converters installed optimum sound and performance gains.

All of these BBK kits are designed to replace the factory shorty style headers and factory mid pipe.

Each BBK long tube header and matching mid pipe kit will bolt directly up to your cat back exhaust on your vehicle to complete the system to the tail pipe.

Our decades of exhaust design and experience make BBK Performance the number one choice for your late model American car or truck.

Features and Benefits

• High Temp Titanium Ceramic Coating – Direct Bolt on Kit – Includes New gaskets and all required hardware – Mid pipe includes high flow catalytic converters and bolts to the factory catback.
• Direct Fit Bolt On Full Length Long Tube Exhaust Headers

PART #1659

FEATURES:

• Required When Installing BBK Long Tube Headers On Your Fox Body Mustang
• 2.5" Mandrel Bent Stainless Steel Tubing
• High Flow Catalytic Converters for Maximum Flow
• For Use With BBK Long Tube Headers 1516, 15160, 1594,15940,1569,15690
• Cannot Be Sold or Shipped To California Residents
  

VEHICLE FITMENT:

• 1979-1993 Mustang 5.0L with BBK Long Tube Headers 

Complete Your Long Tube Header Install
Crank up the power potential of your 1979-1993 Mustang 5.0 with this BBK catted short X-pipe. This BBK X-pipe will dramatically increase the sound of your Mustang to a roar that will be sure to turn heads. Not only is this catted X-pipe required to finish your long tube header install, it further improves exhaust flow, increasing horsepower, torque and throttle response.

High Quality
BBK Performance short X-pipes are designed from 2.5" mandrel bent stainless steel tubing with high flow catalytic converters for maximum exhaust flow. The X-pipe features rear oxygen sensor bungs in the factory location making installation a breeze.

Emissions
Please Note: The new catalytic converters used in the manufacture and production of ALL BBK Performance high flow H and X exhaust pipes meet Federal EPA requirements. (N/CE - New aftermarket Converter) Federal Catalytic Converters are not legal for sale, installation or use on ANY licensed vehicle in the State of California. These converters do NOT carry an Executive Order number (EO number) and are NOT California CARB approved. Please check your state and local emissions laws to ensure compliance.

PART #1594

FEATURES:

• 15-20 Horsepower Increase
• Large 1-3/4" Primaries for Maximum Flow
• Titanium Ceramic Finish
• Leak Free Ball & Socket Collector
• 16 Gauge Steel Tubing with 3/8" Thick Flanges
• For Use With BBK Mid Pipes
• Gaskets & Hardware Included

VEHICLE FITMENT:

• 1986-1993 Mustang 5.0L
• Fits manual transmissions ONLY (Does not fit AOD/E)
• For Auto Trans See Part #1531 or Part #15310
• May require aftermarket steering shaft to clear header

Please note:
These BBK Long Tube Headers require the use of O2 wire harness extensions - these are not included and are recommended for installation - See Part # 1676

Increased Exhaust Flow for More Horsepower
Increase the horsepower output from your 1979-1993 Mustang 5.0 with these titanium ceramic coated BBK Performance full length headers. BBK full length headers will increase your exhaust flow giving you additional horsepower and torque. These full length headers will help give your Mustang a throaty exhaust note. 

Designed to Perform
BBK Performance full length headers are made from 1-3/4" CNC-machined mandrel bent tubing with 3/8" thick die-stamped flanges. The full length primary tube design creates unrestricted exhaust flow for ultimate horsepower gains. These headers are pressure tested to ensure leak free performance.

Bolt-On Installation
These full length headers are designed as a direct bolt on with use of a BBK Performance short mid pipe. Kit includes new gaskets and hardware. Fits manual transmissions only.