Click to zoom in
Choose the right wheel by measurement before the tire is mounted
TS-R189084P0003 is one TS-R Rallye wheel with the exact size, bolt pattern, offset, center bore, and finish listed below. It is a specification-selected part, so compatibility depends on the complete wheel and vehicle measurements rather than a broad year-make-model claim.
Key Features
- 18x9-inch wheel
- 6x139.7 bolt pattern
- ET0 offset
- 106.1 mm center bore
- Satin Silver finish
- 2,500-pound load rating
- One-piece counter-pressure cast construction with a flow-formed rim and barrel
- Back-milled spoke areas and FEM-guided weight optimization
- Sold individually
Fitment
| Application Type | Requirement | Verified Value | Buying Note |
|---|---|---|---|
| Universal / specification selected | Wheel size | 18x9 inches | Confirm tire size and all body, brake, and suspension clearances |
| Universal / specification selected | Bolt pattern and bore | 6x139.7 / 106.1 mm | Confirm lug count, pitch circle, hub diameter, and centering method |
| Universal / specification selected | Offset | ET0 | Confirm inner and outer position before tire mounting |
| No year-make-model mapping | Vehicle compatibility | Not assigned | Test-fit the bare wheel and verify load capacity and hardware |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | TS-R189084P0003 |
| Series | TS-R Rallye |
| Diameter | 18 inches |
| Width | 9 inches |
| Bolt Pattern | 6x139.7 |
| Offset | ET0 |
| Center Bore | 106.1 mm |
| Finish | Satin Silver |
| Load Rating | 2,500 pounds |
| Construction | One-piece counter-pressure cast with flow-formed rim and barrel |
| Lug Seat | Conical |
What's Included
- One TS-R Rallye wheel in Satin Silver
- BBS center cap shown with the exact product image
- Tire, TPMS sensor, hub ring, lug hardware, mounting, and balancing are not included unless separately supplied
About BBS
BBS applies motorsport-derived engineering to road and truck wheels. The TS family combines one-piece counter-pressure casting with a flow-formed rim and barrel, back-milled spoke areas, and load-focused construction for specification-matched installations.
Related Parts
- Vehicle-specific conical-seat lug nuts or bolts
- Hub-centric rings matched to the vehicle hub and wheel bore when required
- Compatible TPMS sensors and valve stems
- Tires selected for the wheel width, load, clearance, and intended use
FAQ
What is the TS-R189084P0003?It is one TS-R Rallye wheel in the 18x9 Satin Silver configuration shown in this listing.
Is this listing for one wheel or a set?The listed price and package quantity are for one wheel. Order the required quantity for the vehicle and installation plan.
Does the bolt pattern alone guarantee fitment?No. Diameter, width, offset, center bore, brake clearance, suspension clearance, load capacity, lug seat, and tire size must also be verified.
Is a tire included?No. The listing is for the wheel only; tire, mounting, balancing, and TPMS service are not included.
Is a TPMS sensor included?No TPMS sensor is represented as included. Select a sensor and valve compatible with the vehicle and wheel.
Are lug nuts or bolts included?No lug hardware is represented as included. Use the correct conical-seat hardware, thread specification, length, and torque procedure.
Is a hub-centric ring required?A ring may be required when the vehicle hub is smaller than the 106.1 mm center bore. Verify the vehicle hub diameter before ordering.
What should be checked before mounting a tire?Test-fit the bare wheel and verify hub seating, brake and suspension clearance, fender clearance, hardware engagement, and intended tire size.
Installation Instructions
- Confirm the carton label matches the ordered wheel before mounting a tire.
- Compare diameter, width, bolt pattern, offset, center bore, load rating, and lug-seat type with the vehicle requirements.
- Test-fit the bare wheel and verify hub seating, brake clearance, suspension clearance, and fender clearance through the steering and suspension range.
- Select the correct tire, TPMS sensor, valve, hub ring, and conical-seat hardware for the verified application.
- Mount and balance the tire using wheel-safe equipment and the tire manufacturer's procedures.
- Install the wheel on clean mating surfaces and hand-start every fastener.
- Torque the fasteners in the vehicle manufacturer's sequence and specification.
- Recheck torque after the initial service interval and inspect for vibration, contact, or hardware movement.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
BBS
BBS wheels, PFS fitment hardware, center caps, and wheel accessories at Black Ops Auto Works. Explore selected LM, RI-A, RF, FI-R Evo, CH-R, CI-R, XR, SR, and TS-series configurations. Compare wheel dimensions, construction, finish, and mounting requirements to find the right combination for your vehicle. BBS LM and RI-A Forged Wheels The BBS LM uses two-piece forged aluminum construction, while the RI-A uses a one-piece forged aluminum design. This collection includes selected sizes and finishes from both families, along with other BBS wheel options for application-specific builds. Choose the exact wheel part number rather than relying on the model name alone. Two LM or RI-A wheels can differ in width, offset, bolt pattern, center interface, and finish. Confirm front and rear specifications separately when planning a staggered setup. BBS Road Wheels and Finish Options Compare selected CH-R, CI-R, XR, SR, RF, and FI-R Evo listings for your preferred design and configuration. Availab...
View BBS Products
Wheels
Find wheel designs for street cars, trucks, SUVs and competition-focused projects at Black Ops Auto Works. Compare Vors, Vossen, Method, Enkei, Weld, Gram Lights, fifteen52, BBS and other listed families by exact size, construction, finish and application. Build the choice around the vehicle and tires you intend to use.Choose the Design for Your ProjectStreet, OEM-inspired, rally, truck, dually and off-road references serve different styling and packaging goals. A wheel’s appearance or similar bolt pattern does not establish compatibility with a vehicle’s brakes, hubs or load requirements.Compare spoke profile, lip depth and finish after identifying suitable dimensions. Dually references specify mounting positions; front, rear and inner/outer arrangements require their exact applications.Construction and Documented SpecificationsCast, flow-formed and forged designs use different manufacturing approaches. Flow forming a cast wheel’s barrel is separate from fully forging the complete ...
View Wheels Products
Wheels & Tires
Plan a complete wheel-and-tire setup with aftermarket wheels, tires and installation hardware at Black Ops Auto Works. Compare street, winter, track-oriented and off-road tire references with wheel designs for cars, trucks and SUVs. Select each component for the same vehicle, operating conditions and load requirements.Wheel Design and ConstructionBrowse wheel families including Factory Reproductions, MRR, Ferrada, Method, Vossen, Enkei and other listed brands. Compare the exact model’s construction, load rating, weight and use guidance rather than choosing by style or a manufacturing label alone.Match diameter, width, bolt pattern, bore and offset, then verify barrel/spoke brake clearance and tire position through movement. Dually or staggered references require the appropriate position and full setup review.Tires for the ConditionsThe selection includes Michelin, Toyo, Yokohama, BFGoodrich, Atturo, Nankang, Mickey Thompson and other named tire references. Compare exact tread family...
View Wheels & Tires Products
Wheels - Cast
Compare cast and cast-based performance wheel references for street, truck and off-road projects. Browse Vors, Method, Enkei, Gram Lights, fifteen52, ICON, Weld and other listed designs by exact application and finish. Confirm the manufacturer’s construction specification for the chosen model, including any flow-forming process.Cast and Flow-Formed ConstructionConventional casting forms the wheel from molten alloy, while flow forming adds a rim-forming operation to a cast starting structure. Enkei’s MAT process is one named example of this combined approach. It is separate from fully forging the complete wheel.Choose by the exact design’s weight, load rating, testing and intended use. A construction category alone does not guarantee a lighter, stronger or better-performing wheel than another model.Street, Truck and Specialty DesignsCompare mesh, multi-spoke, rally, OEM-inspired and truck-focused designs for the vehicle and tire plan. Dually wheel references and beadlock/Bead Grip-st...
View Wheels - Cast Products