-32%
Click to zoom in
Rear Suspension Control for the 2013–2018 Toyota RAV4
Bilstein 24-328425 is a B8 TerraSport rear shock for the verified RAV4 applications below. Its monotube design is tuned for this application and supplied with a spring-seat spacer that permits approximately 1 inch of rear lift when installed as directed.
Key Features
- Application-specific B8 TerraSport monotube damping.
- Non-adjustable damping with silver-painted body and protective boot.
- Eye-style upper and lower mounts.
- Optional spring-seat spacer for approximately 1 inch of rear lift with the factory springs.
- 24-328425 is sold individually; two rear shocks are required per vehicle.
Fitment
| Years | Make | Model | Submodel |
|---|---|---|---|
| 2018 | Toyota | RAV4 | Adventure |
| 2013–2014 | Toyota | RAV4 | EV |
| 2016–2018 | Toyota | RAV4 | Hybrid Limited |
| 2017–2018 | Toyota | RAV4 | Hybrid SE |
| 2016–2018 | Toyota | RAV4 | Hybrid XLE |
| 2013–2018 | Toyota | RAV4 | LE |
| 2013–2018 | Toyota | RAV4 | Limited |
| 2017–2018 | Toyota | RAV4 | Platinum |
| 2017–2018 | Toyota | RAV4 | SE |
| 2013–2018 | Toyota | RAV4 | XLE |
Confirm the exact vehicle and suspension configuration before ordering 24-328425. Front suspension components are separate. Follow Bilstein's instructions when retaining stock height or installing the supplied lift spacer; do not assume compatibility with other lift kits.
Specifications
| Detail | Value |
|---|---|
| Manufacturer part number | 24-328425 |
| Series / position | B8 TerraSport / rear |
| Internal design | Monotube; non-adjustable damping |
| Extended length | 428.7 mm / 16.88 in |
| Collapsed length | 293.5 mm / 11.56 in |
| Upper / lower mount | Eye / eye |
| Finish | Silver paint |
| Protective boot | Included |
| Supporting components | One 10 mm spring-seat spacer, related hardware and instructions |
| Quantity per vehicle | Two shocks; this listing is for one |
What's Included
- One Bilstein 24-328425 rear shock with protective boot.
- One spring-seat spacer, related hardware and installation instructions.
Factory coil springs, front struts and a second rear shock are not included.
About Bilstein
Bilstein develops application-specific suspension dampers for road and off-road use. B8 TerraSport products are designed to support CUV suspension upgrades. This shock carries Bilstein's limited lifetime warranty, subject to the manufacturer's terms.
Related Parts
- Air Lift 1000 air spring kit for Toyota RAV4 — a separate load-support product, not an included component or a verified combination with this suspension upgrade. Confirm spring and spacer compatibility before combining products.
FAQ
What is the 24-328425?It is an individual Bilstein B8 TerraSport rear shock with supporting spacer and hardware for the listed Toyota RAV4 applications.
Is this a pair of shocks?No. One shock is supplied; a vehicle requires two for the rear axle.
Does the shock alone raise the vehicle?The included spring-seat spacer produces the specified approximate 1-inch rear lift when installed according to Bilstein's instructions.
Can I retain stock rear ride height?The instructions provide a path that omits the optional lift spacer when retaining stock height. A professional must verify the full suspension configuration.
Are replacement coil springs included?No. The application uses compatible factory springs; new coil springs are not included.
Can I adjust the damping?No. The shock has non-adjustable, application-specific damping.
Does this include the front suspension?No. Front struts and other front suspension parts are separate.
Who should install it?Bilstein requires installation by a professional automotive suspension technician with the necessary tools and knowledge.
Installation Instructions
- Verify fitment and review the official Bilstein mounting instructions.
- Have a professional technician support the vehicle and remove the original rear shocks using the vehicle service procedure.
- If the optional lift is required, install the spring-seat spacer and refit the factory spring in its original orientation as instructed.
- Install the shocks, tighten fasteners using the specified service procedure, then check alignment and suspension operation.
California Proposition 65 Warning
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Bilstein
Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...
View Bilstein Products
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products