Bilstein 46-276681 is the B12 suspension kit identified for the applications and mounting position below. Bilstein B12 (Pro-Kit) suspension kits include a complete set of Bilstein Performance dampers paired with Eibach (Pro-Kit) springs that provide moderate lowering between 24-40mm (depending on application). These kits offer dampers and springs that are tuned for each specific application to provide the best fixed height lowering solution. Bilstein B12 (Pro-Kit) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
| Years | Make | Model | Trim | Application Notes |
|---|---|---|---|---|
| 2014-2018 | Ford | Focus | ST | Use only on the listed application and position |
| Detail | Value |
|---|---|
| Manufacturer Part Number | 46-276681 |
| Brand | Bilstein |
| Series | B12 |
| Product Type | Suspension Kit |
| Position | Application Specific |
| Fitment Scope | Vehicle specific |
Bilstein develops OE replacement and performance suspension systems around controlled damping, application-specific dimensions, and vehicle-specific calibration. Its B-series products range from original-equipment-style replacement dampers to monotube performance shocks and matched spring-and-damper systems.
It is a Bilstein B12 suspension kit for the vehicle applications and position shown in the Fitment table.
Is this a universal suspension part?No. This product is vehicle specific and should be used only on the listed applications.
Which mounting position does it use?The manufacturer identifies this component for the application specific position.
Should shocks or struts be replaced in pairs?Follow the vehicle service procedure and inspect the opposite side. Paired axle replacement is commonly recommended when wear or mileage is similar.
Are mounts and springs included?Only the components stated in the What's Included section and shown in the retained exact-product images are supplied.
Is an alignment required after installation?An alignment check is recommended whenever installation disturbs struts, control-arm positions, or other alignment-sensitive suspension points.
Can this part be installed with worn mounts?Inspect mounts, bearings, bump stops, boots, and related hardware before installation and replace worn items with verified compatible parts.
Is professional installation recommended?Yes. Suspension work can involve stored spring energy, vehicle lifting, torque procedures, and a final safety inspection.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Shop Bilstein shocks, struts, leveling kits and suspension components at Black Ops Auto Works. Choose OE-style replacement dampers for a maintenance project, performance dampers for your spring setup, or truck suspension parts for the way you drive. Compare the B4, B6, B8 and truck-series options by vehicle, ride height and intended use.B4, B6 and B8 Shocks and StrutsB4 OE Replacement listings offer a starting point for restoring supported factory suspension applications. For passenger cars, B6 Performance serves supported stock-height setups, while B8 Performance Plus is intended for compatible lowered applications. Start with the spring and ride-height configuration you want to retain or build, then select the approved damper.The collection includes front and rear shocks, side-specific struts and selected DampTronic applications. Match factory electronic damping and suspension options before choosing a replacement. Explore related shocks and struts when planning work across both a...
View Bilstein Products
Shop matched shock and spring kits, lowering suspension packages, sport and street bundles, and pre-engineered shock-plus-spring upgrade sets from Bilstein, KYB, KONI, Eibach, H&R, Tein, Skunk2, Ford Performance, Roush, Steeda, Hotchkis, Progress Technology, RS-R, Tanabe, and other suspension specialists. Find matched shock/strut and lowering spring packages engineered as complete ride-height and damping upgrades: Bilstein B12 Pro-Kit and Sportline packages, KONI STR.T + Eibach kits, Eibach Pro-System and Pro-System Plus, H&R Cup Kits, Tein S.Tech + EnduraPro, and Ford Performance Handling Pack style bundles. Shock and spring kits for street-tuned daily drivers, sport-sedan handling upgrades, autocross and track builds, drift and time-attack platforms, and lowered-stance builds — Mustang, Camaro, Challenger, Civic, Integra, Accord, Impreza, WRX/STi, Golf, GTI, Golf R, Jetta, GLI, BMW 3-Series/M3, 335i, M2, M4, Miata, GR86, BRZ, Focus ST/RS, Genesis Coupe, and hundreds of ...
View Shock & Spring Kits Products
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products
