-16%
Click to zoom in
Support Constant Rear Load Without Losing Ride Height
Bilstein 53-333995 is a B12 Special rear coil spring set for the listed Toyota 4Runner and Land Cruiser applications carrying approximately 500 pounds of constant rear load. It provides about 1.5 inches of rear lift in the manufacturer-confirmed configurations below.
Key Features
- Bilstein 53-333995 includes a matched pair of rear coil springs
- Designed around approximately 500 pounds of constant rear load
- Provides approximately 1.5 inches of rear lift
- Black-finished B12 Special spring construction
- Coil springs only; dampers are not included
Fitment
Use Bilstein 53-333995 only with the listed rear-position applications and constant-load requirement.
| Years | Make | Model | Details |
|---|---|---|---|
| 2025-2026 | Toyota | 4Runner | TRD Off-Road or TRD Off-Road Premium, 2.4L i-Force Max, rear, 500 lb constant load |
| 2024-2026 | Toyota | Land Cruiser | 1958 or Base, rear, 500 lb constant load |
| 2024 | Toyota | Land Cruiser | First Edition, rear, 500 lb constant load |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 53-333995 |
| Product Type | B12 Special rear coil spring set |
| Position | Rear |
| Lift | Approximately 1.5 inches |
| Load Requirement | Approximately 500 pounds of constant rear load |
What's Included
- One Bilstein 53-333995 matched rear coil spring pair
- Dampers, front springs and unrelated installation hardware are not included
About Bilstein
Bilstein develops application-specific suspension components using matched spring and damping characteristics. This B12 Special pair is intended for the stated rear load and vehicle configuration rather than as a universal lift spring.
Related Parts
- Use rear dampers and installation hardware confirmed for the same vehicle, ride height and constant-load configuration.
FAQ
What is the 53-333995?It is a matched Bilstein B12 Special rear coil spring pair for the vehicle and constant-load applications shown above.
How much does this spring set lift the rear?Bilstein specifies approximately 1.5 inches of rear lift for the supported applications.
Does the 500-pound figure describe maximum payload?No. It describes the approximate constant rear accessory load the spring is designed to support, not the vehicle payload rating.
Will this fit a 4Runner without the listed trim and engine?No. Use it only with the manufacturer-confirmed 4Runner applications in the Fitment table.
Does it fit every Land Cruiser trim?No. Fitment is limited to the listed 1958, Base and First Edition applications.
Are rear shocks included?No. This listing contains the rear coil spring pair only.
Is an alignment recommended?Yes. Check ride height and alignment after suspension work and follow the current Bilstein installation guidance.
Can the representative image confirm every detail?No. Use the written part number, fitment, load and position data to confirm the exact application.
Installation Instructions
- Confirm the exact vehicle, trim, engine where stated, rear position and constant accessory load.
- Support the vehicle safely and follow the current Toyota and Bilstein spring-removal procedures.
- Install both rear springs as a matched pair with verified isolators and compatible dampers.
- Settle the suspension, verify clearances and ride height, then complete an alignment check.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Bilstein
Shop Bilstein shocks, struts, leveling kits and suspension components at Black Ops Auto Works. Choose OE-style replacement dampers for a maintenance project, performance dampers for your spring setup, or truck suspension parts for the way you drive. Compare the B4, B6, B8 and truck-series options by vehicle, ride height and intended use.B4, B6 and B8 Shocks and StrutsB4 OE Replacement listings offer a starting point for restoring supported factory suspension applications. For passenger cars, B6 Performance serves supported stock-height setups, while B8 Performance Plus is intended for compatible lowered applications. Start with the spring and ride-height configuration you want to retain or build, then select the approved damper.The collection includes front and rear shocks, side-specific struts and selected DampTronic applications. Match factory electronic damping and suspension options before choosing a replacement. Explore related shocks and struts when planning work across both a...
View Bilstein Products
Toyota 4Runner Parts and Accessories
Shop Toyota 4Runner parts for suspension projects, brake maintenance and exterior accessories at Black Ops Auto Works. Compare Bilstein and ICON references, applicable service brakes, body-specific lighting and storage accessories. Choose a coordinated order for your exact generation, drivetrain and factory equipment.Suspension Service and Lift ProjectsCompare Bilstein dampers, ICON coilover packages, springs and upper control arms for the exact 4Runner generation and suspension project. Earlier applications and 2025-and-later options require separate coverage checks. Match drivetrain, trim, factory suspension and installed ride height, then review required mounts, supporting components, wheel clearance and alignment as a complete setup.Brake Maintenance by AssemblyCompare applicable Brembo or DFC references using actual caliper, rotor dimensions, axle and production coverage. Goodridge line references need exact routing and mounting application. Verify the manufacturer’s complete 4...
View Toyota 4Runner Parts and Accessories Products
Toyota Land Cruiser Parts and Accessories
Shop Toyota Land Cruiser parts for suspension projects, brake maintenance, exterior protection and everyday accessories at Black Ops Auto Works. Compare Bilstein, ICON and ARB/OME choices alongside generation-specific chassis and service components. Start with the actual Land Cruiser series, market and powertrain to build the right order.Suspension Across Land Cruiser SeriesCompare service dampers, 100 Series front arms, LC200 trailing arms and LC250 suspension systems by the specific chassis project. Match the actual chassis and factory equipment before comparing individual shocks, coil springs or staged systems. Accessory loading, current ride height and alignment requirements belong in the complete setup plan.Brake Maintenance by Installed AssemblyOlder Land Cruiser references include drums, master cylinders and wheel cylinders with separate axle or side positions. Later pad and rotor references serve different assemblies. Record the actual brake system and match dimensions, moun...
View Toyota Land Cruiser Parts and Accessories Products