Refresh Front Damping on Chevrolet S10 and GMC S15 2WD
The B6 4600 shock absorber serves the listed vehicle and mounting application. Its monotube construction controls suspension movement; select it by the exact application and mounting requirements. Manufacturer part number: 24-187428.
Key Features
- Monotube construction
- For stock-height vehicles; non-adjustable damping.
- Application-specific suspension component
Fitment and Compatibility
Front shock for listed stock-height RWD applications: Chevrolet S10 1982–2003, Blazer 1995–2005, S10 Blazer 1983–1994; GMC S15 1982–1990, Sonoma 1991–2003, Jimmy 1992–2001, S15 Jimmy 1983–1991; Isuzu Hombre 1996–2000. Excludes ZQ8 sport suspension where noted in Bilstein’s application table.
Specifications
| Manufacturer | Bilstein |
|---|---|
| Part Number | 24-187428 |
| Series | B6 4600 |
| Design | Monotube |
| Quantity | One shock absorber |
| Condition | New |
What's Included
One shock absorber. Springs and other suspension components are not included unless explicitly listed. Package configuration: 24-187428.
About Bilstein
Bilstein develops dampers and suspension systems for original equipment, replacement, performance and custom automotive applications.
Related Parts
Compare these related items when planning installation of 24-187428. Each listing has its own compatibility requirements.
- Bilstein 22-282835 2014–2019 Toyota Highlander Front Left Strut
- Bilstein 23-266483 2014–2018 BMW 328d xDrive Front Left DampTronic Strut
Frequently Asked Questions
What is the manufacturer part number?
24-187428
How is compatibility determined?
Match the vehicle, suspension options and mounting position listed above.
Is this sold as a pair?
No. This listing is for one unit; check the required quantity for your vehicle.
Is a coil spring included?
No. A spring is not included in this listing.
Can it be installed in a different position?
Use only the specified position and approved mounting configuration.
Will it fit a modified suspension?
Changes to ride height or mounting geometry require a separate compatibility check.
What should be inspected during replacement?
Inspect mounts, bushings, springs and related hardware for damage or wear.
Where can installation details be found?
Use the manufacturer link below for the current part-specific instructions and application table.
Installation and Use
Use Bilstein’s part-specific instructions, torque requirements and mounting orientation. Support the vehicle securely and have a qualified technician perform the work; check wheel alignment where suspension geometry is disturbed. Follow the current manufacturer guidance for 24-187428.
Manufacturer product information and instructions
California Proposition 65 Information
Review the manufacturer’s current product label and packaging for any applicable warning. California Proposition 65 information.
Bilstein
Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...
View Bilstein Products
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products


