Bilstein B16 14-18 BMW 328d / 12-16 BMW 328i Front and Rear Suspension Kit

Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...

Shop BMW 228i parts by Coupe, Convertible or Gran Coupe body and exact chassis. For F22 applications, engine-specific intake connections and brake equipment are useful starting points. F22 Intake Application and Kit Contents Injen Evolution intake coverage includes specified 2014–2016 F22 228i N20 applications. Confirm engine, production details and drivetrain coverage before comparing the installed inlet and sensor connections. Review airbox, filter, scoop, adapters and mounting pieces in the exact kit. A service filter is a replacement for a specified intake housing rather than a complete induction system. Body, Brakes and Sensors Keep two-door and Gran Coupe applications separate. Body-specific exhaust, exterior and chassis components require the correct platform and mounting details. For brakes, identify caliper, rotor size and material, pad shape and axle. Confirm wear-sensor connector and routing independently, including any changes from a factory brake option or later convers...

Shop BMW 230i parts by generation, engine and body. F22/F23 and later G42 applications need their own intake, chassis and lighting coverage. Generation-Specific Induction Injen identifies specified F22/F23 230i 2.0T intake applications. Confirm the exact engine and production coverage rather than extending an earlier kit to a later G42 car. Compare housing, filter, turbo-side connections, ventilation fittings and mounting pieces. Record any existing inlet or charge-pipe changes so companion components suit the installed system. Brakes, Body and Lighting Identify caliper, rotor dimensions, material and axle before choosing brake components. Sensor connector and routing, pad compound and supplied hardware are separate checks. For exterior or lighting work, match the actual body and lamp assembly, including production changes, connectors and coding requirements. An M-specific body application does not automatically cover a standard 230i. Choose Your Part Identify F22/F23 or G42 and en...

Find BMW 328d parts for the four-cylinder diesel 3 Series. Brake equipment, body and drivetrain are useful starting points for chassis service and component selection. Diesel Powertrain Identification BMW introduced the U.S. 328d with a 2.0-liter four-cylinder diesel, offering rear-wheel drive and xDrive. Use the actual drivetrain and engine details for application checks. Engine filters and charge-air components require diesel-specific references and connections. Do not transfer petrol 328i induction coverage to the 328d. Brake Kits and Wear Sensors Compare rotor diameter, thickness, height and venting against the installed brakes. A broad 3/4 Series description does not resolve every brake option. Choose wear sensors by axle, connector and routing. Review pad compound and fitting hardware separately, and follow the manufacturer’s bedding instructions for the chosen friction parts. Choose Your Part Identify diesel engine and drivetrain. Match induction and filter references. Measu...

Explore BMW 328i parts by generation, engine and body. Earlier six-cylinder cars and later turbocharged four-cylinder applications need different induction, service and exhaust choices. Separate the Engine Applications Record the engine identification before choosing an intake, ignition component or service filter. A later turbocharged application should not be transferred to an earlier naturally aspirated engine. Compare air-meter fittings, breather connections, inlet routing and mounting. Where emissions equipment changes the application, use the manufacturer’s exact coverage. Plan Chassis and Exhaust Purchases Use sedan, coupe, convertible or wagon coverage for body-related components. An exhaust section must join the correct starting system and clear the actual bumper outlets. Select suspension by drivetrain and axle loads. Brake service needs its own caliper, rotor, pad-shape and sensor checks before comparing compounds or kit contents. Choose Your Part Identify generation, en...

Shop BMW 330i parts by engine generation and body. Earlier six-cylinder cars and later turbocharged four-cylinder models need separate intake, exhaust and service applications. Exhaust Scope and Engine Coverage G2X AWE Touring selections include axle-back exhaust applications with specific production coverage. An axle-back changes the rear portion; compare retained pipework and the exact sections supplied. Check tip finish, bumper-outlet arrangement and mounting before deciding on appearance. An earlier 330i body or engine is a different exhaust application. Intake and Chassis Planning For induction components, compare engine identification, sensor connections and breather fittings. Record the housing if an aftermarket intake is already installed. Select springs and dampers by body, drivetrain and axle loads. Brake components need the installed rotor and caliper application before pad compound and sensor choices are made. Choose Your Part Identify engine, chassis and body. Compare ...

Find BMW 335i parts by engine generation, body and current build specification. N54 and N55 induction, charge-air and exhaust applications need separate consideration. Identify N54 or N55 Use engine identification to distinguish the twin-turbo N54 from the later N55 installation. Intake connections and charge-air hardware should follow that engine application. Record existing intake, charge pipe, intercooler and calibration changes before choosing companion components. For ignition service, use the required plug specification and any documented tuner requirements. Choose the System You Need Compare a complete exhaust with an axle-back, mid-pipe or conversion section. Check body routing, joining points, valve operation and the pieces retained from the existing system. For chassis work, match suspension and brakes to the actual body and drivetrain. Identify calipers and rotor material before comparing pad compounds or sensor kits. Choose Your Part Identify engine, body and drivetrain...

Shop BMW 340i parts for the B58-powered 3 Series. Compare intake connections, axle-back exhausts and mid-pipes as separate components of the build. Axle-Back or Mid-Pipe AWE F3X 340i Touring axle-back selections include different tip finishes, while the performance mid-pipe is a separate purchase. Review the exact pieces supplied and the starting exhaust required. Compare compatible body coverage, joining points, resonation and outlet clearance. Build the sound plan around the complete installed exhaust rather than a section name alone. B58 Induction and Chassis The 340i introduced the B58 six-cylinder to the 3 Series range. Use its specific inlet connections, sensor fittings and filter requirements when comparing intakes. Suspension and brake components still need the actual body, drivetrain and factory options. Identify calipers, rotor dimensions and damper equipment before choosing service parts. Choose Your Part Identify B58 application and body. Compare axle-back and mid-pipe ...

Explore BMW 428i Gran Coupe parts for the F36 five-door body. Brake-system identification and body-specific chassis coverage help build a complete service plan. Rotor and Pad Kit Selection Match rotor diameter, thickness, height and venting to the installed caliper. A broad 3/4 Series kit description does not settle each brake option. Choose pad compound for intended road or competition use after confirming pad shape and rotor material. Check whether sensors and fitting hardware are included. Gran Coupe Body Requirements Use F36 coverage for suspension, exhaust and body-related accessories. Coupe styling does not establish the Gran Coupe’s routing, mounting or axle-load application. For intake components, identify the petrol engine and emissions equipment, then compare sensor fittings, breathers and inlet connections. Choose Your Part Identify F36 body and engine. Measure rotors and identify calipers. Compare pad compound, sensors and hardware. Use Gran Coupe chassis and body cover...

Shop BMW 428i parts for the turbocharged four-cylinder 4 Series. Identify coupe, convertible or Gran Coupe body before comparing induction, exhaust and chassis components. Four-Cylinder Induction Choices Match the actual engine and emissions equipment when selecting an intake. Compare air-meter fittings, breathers, inlet connections and mounting rather than relying on displacement alone. For service filters, establish whether the original airbox or an aftermarket housing is installed. Replacement elements should follow the housing manufacturer’s reference. Body and Equipment Coverage Exhaust routing, suspension axle loads and exterior attachments depend on body. For five-door applications, use the 428i Gran Coupe collection as the body-specific starting point. Identify calipers and rotor dimensions before brake service. Compare pad use, sensor connectors and hardware contents after establishing the correct axle application. Choose Your Part Identify engine, emissions equipment and ...

Shop BMW 430i Gran Coupe parts by generation and turbocharged petrol engine. Earlier F36 and later Gran Coupe bodies need their own chassis and exterior applications. Induction by Engine Version Match the exact engine and emissions equipment before comparing intake kits. A related 330i listing requires explicit coverage for the actual Gran Coupe installation. Compare sensor fittings, breathers, filter housing and required adapters. Keep the intake-system reference so later filter replacements match the installed assembly. Five-Door Body and Chassis Choose exhaust and suspension components with the correct Gran Coupe generation and body coverage. Review routing, mounting and axle-load requirements separately. For lighting or exterior trim, compare attachment points and electrical equipment. Brake service needs the installed caliper, rotor and wear-sensor application. Choose Your Part Identify Gran Coupe generation and engine. Check emissions equipment and intake connections. Require...

Find BMW 430i parts for the turbocharged four-cylinder 4 Series. Compare exhaust scope, intake connections and body-specific chassis equipment before choosing an upgrade. Touring Axle-Back Scope AWE G2X Touring axle-back selections identify specific 430i production applications and tip finishes. Compare the body and bumper application as well as the supplied rear sections. An axle-back retains more original pipework than a complete cat-back. Review joining points, mounting and the required starting exhaust when planning installation. Engine and Body Selection Use exact engine and emissions coverage for intake components. Compare sensor and breather fittings, mounting and filter-service access. Suspension must cover the actual coupe, convertible or Gran Coupe body, drivetrain and axle loads. Brake parts should follow the fitted caliper and rotor rather than styling package alone. Choose Your Part Identify engine, generation and body. Compare axle-back contents and retained pipework....

Shop BMW 435i Gran Coupe parts for the F36 turbocharged six-cylinder. Match intake, charge-air and exhaust components to the five-door body and installed engine equipment. Induction and Charge-Air Connections Use the exact engine and F36 application before comparing intake kits. A kit restricted to another chassis needs explicit Gran Coupe coverage. For a charge pipe, compare intercooler and throttle connections, sensor provisions and any auxiliary ports. Review the supplied fittings and original components retained. Gran Coupe Installation Scope Exhaust must cover F36 routing, mounting and outlets. Identify the existing system before selecting an axle-back, mid-pipe or conversion section. Suspension and brakes need separate equipment checks: body, drivetrain and axle loads for the chassis; caliper, rotor and sensor details for brake service. Choose Your Part Identify F36 engine and drivetrain. Compare inlet and charge-pipe connections. Use Gran Coupe exhaust routing. Record suspen...

Choose BMW 435i parts for the turbocharged six-cylinder 4 Series. Compare intake connections, axle-back exhausts and mid-pipes with the complete installed system in mind. Exhaust Sections and Tip Choices AWE F3X 335i/435i selections include Touring axle-back configurations and a separate performance mid-pipe. Review the exact kit’s body coverage, joining points and supplied sections. Tip size and finish must work with the compatible rear assembly and bumper outlets. A conversion section should identify the starting exhaust it requires. Induction and Chassis Planning Match the actual engine, sensor fittings, breathers and inlet mounting when comparing intake kits. Keep existing charge-pipe and intercooler changes documented. Suspension needs body, drivetrain and axle-load coverage. Brake-pad compounds should be compared only after matching the caliper, rotor and axle. Choose Your Part Identify engine, body and drivetrain. Compare axle-back and mid-pipe contents. Check intake connect...

Explore BMW 440i Gran Coupe parts for the F36 B58-powered six-cylinder. Keep its engine version and five-door body central when comparing induction and chassis components. B58 Intake and Cooling Interfaces Compare an intake’s exact engine-version and F36 coverage, sensor fittings, breather connections and mounting. A listing for another B58 model needs explicit Gran Coupe coverage. For cooling work, identify the actual circuit and assembly. B58 charge cooling uses an indirect arrangement, so earlier engine intercooler layouts are not a default replacement application. Gran Coupe Exhaust and Chassis Exhaust components need F36 routing, mounting and bumper-outlet coverage. Compare complete systems with axle-backs or joining sections using their actual contents. Suspension should match body, drivetrain, axle loads and damper equipment. Brake parts need the installed caliper and rotor application rather than the engine badge alone. Choose Your Part Identify F36 B58 version and drivetra...

Find BMW 440i parts for the B58-powered 4 Series. Compare intake connections, cooling circuits and exhaust scope around the exact body and existing modifications. B58 Induction and Cooling Use engine-version and chassis coverage when comparing intakes. Check sensors, breathers, inlet fittings and mounting before choosing a filter enclosure or finish. Identify the charge-cooling circuit and original assembly before selecting cooling components. Earlier 435i engine hardware and later M440i applications are separate checks. Exhaust and Body Configuration Compare complete exhausts, axle-backs and mid-pipes by their supplied sections and required starting system. Match body routing, joining points, valves and bumper outlets. For five-door body applications, see the 440i Gran Coupe collection. Suspension and exterior parts need body-specific coverage. Choose Your Part Identify B58 version and exact body. Compare inlet fittings and kit contents. Identify cooling circuit and existing modif...

Shop BMW ActiveHybrid 3 parts with its six-cylinder hybrid powertrain and sedan body identified. Exhaust, induction accessories and brakes each need their own application checks. Hybrid Powertrain and Exhaust Scope BMW’s ActiveHybrid 3 combines a turbocharged six-cylinder petrol engine with electric drive. Match accessories to the engine and hybrid installation rather than extending standard 335i coverage automatically. Distinguish a mid-pipe, axle-back system and complete exhaust. Check the starting system, pipe connections, tips and hybrid-specific routing required for the installation. Induction Accessories and Brake Use For an injection accessory or conversion plate, review the exact engine interface, compatible starting system and required control equipment. A plate conversion is a different purchase from a complete kit. Brake compounds should follow the actual caliper, pad shape and rotor material. Compare street and competition use guidance after establishing application cove...

Explore BMW M235i parts with body and engine application identified. The six-cylinder two-door and four-cylinder Gran Coupe require different induction, exhaust and chassis references. Two-Door Exhaust and Charge Pipes For the F22 two-door, distinguish axle-back systems from performance mid-pipes. Compare the compatible starting exhaust, connections and tip dimensions before combining sections. Charge pipes need the exact engine, intercooler connection and production coverage. Review supplied couplers, fittings and mounting rather than extending a related 335i title automatically. Lighting and Body Applications Tail-light assemblies and DRL modules need exact body, original equipment, connector and installation coverage. A shared styling family is insufficient to identify the electrical application. Keep four-door Gran Coupe applications separate where engine or body layout matters. For chassis work, also record drivetrain, axle loads and damper equipment. Choose Your Part Identify...

Coilovers from KW Suspension, Bilstein, FOX, ICON Vehicle Dynamics, Ohlins, Silver's NEOMAX, BC Racing, Fortune Auto, Ridetech, QA1, H&R, and Eibach are stocked at Black Ops Auto Works for street cars, track cars, off-road trucks, lift-application SUVs, and classic muscle car conversions. Every product is filterable by year, make, model, trim, and drivetrain so the correct coilover kit ships the first time. Black Ops Auto Works carries 1,646 coilover SKUs across non-adjustable, single-adjustable, double-adjustable, and remote-reservoir categories. What This Collection Covers A coilover combines a shock absorber and coil spring into a single adjustable unit with a threaded body for ride height adjustment. Coilovers offer purpose matched spring rates and damper valving that a lowering spring on a factory shock cannot replicate. Product Categories Non-adjustable coilovers, single-adjustable coilovers, double-adjustable coilovers, remote-reservoir coilovers, off-road lift coilov...

Coilovers and coilover components are stocked at Black Ops Auto Works for trucks, SUVs, muscle cars, and street performance builds. Shop complete coilover kits, coilover springs, lowering springs, shock boots, dampening adjustment extenders, and suspension hardware for Ford, Toyota, Chevrolet, Jeep, Dodge, and Porsche platforms. Every product is filterable by year, make, model, trim, and drivetrain so the correct coilover setup ships the first time. Black Ops Auto Works carries 2,259 coilover and component SKUs across street, off-road, and track categories. What This Collection Covers Coilovers combine a coil spring and a shock absorber into a single adjustable unit, giving control over ride height and, on many models, damping stiffness. This collection also includes the individual components used to service, upgrade, or protect an existing coilover system. Product Categories Complete coilover kits, individual coilover shocks, coilover springs, lowering springs, protective shock...

Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...