-46%
Click to zoom in
Front Left Strut Control for Ford Focus
Bilstein 22-255969 is a B4 OE Replacement front left strut for maintaining the original ride character. Match the exact applications and suspension notes below before ordering this individual damper.
Key Features
- Twintube construction for maintaining the original ride character.
- Black-painted body with stem upper mount and base cup lower mount.
- Application-specific damping for the listed vehicle configurations.
- 22-255969 is sold as one individual front left strut.
Fitment
Check the sport-suspension notes by trim below. The ST application is listed separately by the manufacturer.
| Years | Make | Model | Submodel | Suspension / mounting notes |
|---|---|---|---|---|
| 2014-2016 | Ford | Focus | Electric | Sport Suspension |
| 2014-2018 | Ford | Focus | S | Sport Suspension |
| 2014-2018 | Ford | Focus | SE | Sport Suspension |
| 2014-2018 | Ford | Focus | ST | Confirm factory suspension configuration |
| 2014-2018 | Ford | Focus | Titanium | Sport Suspension |
| 2017-2018 | Ford | Focus | SEL | Sport Suspension |
Use the verified application rows for 22-255969; a matching model name alone does not establish compatibility.
Specifications
| Detail | Value |
|---|---|
| Manufacturer part number | 22-255969 |
| Series | B4 OE Replacement |
| Position | front left strut |
| Internal design | Twintube |
| Extended length | 454.5 mm / 17.89 in |
| Collapsed length | 288.0 mm / 11.34 in |
| Upper mount | Stem |
| Lower mount | Base Cup |
| Finish | Black Paint |
| Boot included | No |
| Spring seat included | Yes - Fixed |
| Sale quantity | One individual front left strut |
What's Included
- One Bilstein 22-255969 front left strut.
- Fixed spring seat as part of the strut.
A coil spring and complete assembled top-mount/spring unit are not supplied. A qualified installer must inspect the original mounting and protective components and replace worn service parts as required.
About Bilstein
Bilstein develops dampers for specific vehicles and suspension configurations. The B4 OE Replacement range focuses on maintaining the original ride character. This product carries the manufacturer's limited lifetime warranty, subject to its terms.
Related Parts
- Bilstein B4 rear shock for Ford Focus — A separate rear suspension service part. Confirm its exact application and your factory suspension configuration.
FAQ
What is the 22-255969?It is an individual Bilstein B4 OE Replacement front left strut for the exact vehicle and suspension applications listed above.
Is this a pair or a complete suspension kit?No. The listing supplies one individual front left strut; other suspension parts are separate.
Which suspension configuration does it require?Check the sport-suspension notes by trim below. The ST application is listed separately by the manufacturer.
Is a new coil spring included?No. Select or retain the correct spring for the verified vehicle and damper application.
Is a protective boot included?No. The manufacturer lists no included boot; the installer must inspect the applicable original protective components.
What is the internal design?Bilstein specifies a twintube design with application-specific damping.
Will it fit every trim of the vehicles in the title?No. Match the exact year, model, submodel and suspension notes in the fitment table before ordering.
Who should install this part?A qualified suspension specialist with the appropriate lifting and service tools should perform installation. Spring transfer requires suitable spring-compression equipment.
Installation Instructions
- Verify the exact application and suspension restrictions, then review the official Bilstein installation instructions.
- Have a qualified suspension specialist support the vehicle and remove the original front left strut using the vehicle service procedure.
- Transfer only the correct serviceable spring and mounting components using suitable spring-compression equipment. Inspect mounts, bump stops and protective parts before assembly.
- Tighten fasteners according to the vehicle and Bilstein service instructions, then check clearances, alignment where applicable and suspension operation.
California Proposition 65 Warning
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Bilstein
Shop Bilstein shocks, struts, coilovers, ride-height-adjustable dampers, lift and lowering suspension, springs, and installation components at Black Ops Auto Works. From OE-style replacement dampers to street-performance, track, towing, overland, and off-road systems, Bilstein offers vehicle-specific suspension solutions for cars, trucks, SUVs, vans, and performance platforms. Correct fitment depends on more than year, make, and model. Always verify the Bilstein manufacturer part number, front or rear position, drivetrain, cab and bed configuration, suspension package, factory ride control, axle weight, current ride height, and every application note before ordering. Bilstein B4 OE Replacement Shocks and Struts Bilstein B4 dampers are designed for supported vehicles that need OE-style suspension performance and compatibility. They are commonly selected for daily-driven vehicles using factory springs and standard ride height, although exact application requirements vary. B4 products...
View Bilstein Products
Shocks and Struts
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products